EN 1337-1:2000
(Main)Structural bearings - Part 1: General design rules
General Information
- Abstract
This European Standard is applicable to structural bearings, whether used in bridges or in other structures. This European Standard does not cover: a) bearings that transmit moments as a primary function; b) bearings that resist uplift; c) bearings for moving bridges; d) concrete hinges; e) seismic devices. Although it is not intended to regulate temporary bearings, this standard may be used as a guide in this case (temporary bearings are bearings used during construction or repair and maintenance of structures).
- Status
- Published
- Publication Date
- 20-Jun-2000
- Technical Committee
- CEN/TC 167 - Structural bearings
- Drafting Committee
- CEN/TC 167/WG 1 - Revision of EN 1337
- Current Stage
- 9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
- Start Date
- 14-Mar-2008
- Completion Date
- 14-Mar-2008
- Directive
- Harmonized Standard305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Not Harmonized89/106/EEC - Construction products
Overview
EN 1337-1:2000 - Structural bearings: Part 1: General design rules is a European Standard published by CEN that sets out the general principles and design rules for structural bearings used in bridges and other structures. The standard provides a consistent European framework for specifying bearing behavior, design considerations and suitability for service. It is widely adopted in national implementations (for example SIST EN 1337-1:2001).
This part addresses general design aspects; it is not a product specification for a particular bearing type but a reference for designers and manufacturers developing bearing solutions for structural applications.
Key Topics
The standard focuses on high-level, practical design rules relevant to structural bearing engineering, including:
- Scope and applicability - defines which types of bearings are covered and which are excluded.
- Load and movement considerations - principles for accommodating vertical loads, rotations and horizontal displacements in design.
- Design principles - guidance on selecting bearings to meet structural performance, durability and serviceability requirements.
- Interface and installation - considerations for bearing seating, alignment and tolerances to ensure proper force transfer.
- Durability and material selection - general guidance to ensure long-term performance in service environments.
- Quality and conformity - criteria for using the standard as a basis for specifying and verifying bearing design.
Important exclusions explicitly stated in the scope:
- Bearings that transmit moments as a primary function
- Bearings that resist uplift
- Bearings for moving bridges
- Concrete hinges
- Seismic devices
The standard also notes that while temporary bearings (used during construction, repair or maintenance) are not primarily regulated, the document may be used as a design guide for those situations.
Applications
EN 1337-1:2000 is used to inform the design and selection of structural bearings in:
- Road and railway bridges (fixed and pinned supports where uplift/moment resistance is not primary)
- Building structures requiring engineered bearing solutions
- Refurbishment and maintenance projects where replacement or temporary bearings are specified
The standard is especially valuable where consistent European design practice is required across cross-border projects.
Who uses this standard
Typical users include:
- Structural and bridge engineers
- Bearing manufacturers and suppliers
- Construction contractors and installers
- Design offices and consulting engineers
- National standards bodies and regulatory authorities
Related standards
- Other parts of the EN 1337 series (covering specific bearing types and testing) complement Part 1 by providing product-specific rules and test methods.
- National adoptions (e.g., SIST EN 1337-1) implement the standard within local regulatory frameworks.
Keywords: EN 1337-1, structural bearings, general design rules, bridge bearings, bearing design, CEN, European Standard.
Relations
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
ENV 1991-1:1994 - Eurocode 1: Basis of design and actions on structures - Part 1: Basis of design - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 09-Feb-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Building products evaluation and certification.
QAI Laboratories
Building and construction product testing and certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 1337-1:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Structural bearings - Part 1: General design rules". This standard covers: This European Standard is applicable to structural bearings, whether used in bridges or in other structures. This European Standard does not cover: a) bearings that transmit moments as a primary function; b) bearings that resist uplift; c) bearings for moving bridges; d) concrete hinges; e) seismic devices. Although it is not intended to regulate temporary bearings, this standard may be used as a guide in this case (temporary bearings are bearings used during construction or repair and maintenance of structures).
This European Standard is applicable to structural bearings, whether used in bridges or in other structures. This European Standard does not cover: a) bearings that transmit moments as a primary function; b) bearings that resist uplift; c) bearings for moving bridges; d) concrete hinges; e) seismic devices. Although it is not intended to regulate temporary bearings, this standard may be used as a guide in this case (temporary bearings are bearings used during construction or repair and maintenance of structures).
EN 1337-1:2000 is classified under the following ICS (International Classification for Standards) categories: 91.010.30 - Technical aspects. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1337-1:2000 has the following relationships with other standards: It is inter standard links to EN 1337-4:2004, EN 1337-3:2005, EN 1337-9:1997, EN 1337-11:1997, ENV 1993-2:1997, EN 1337-5:2005, ENV 1992-2:1996, EN 1337-7:2004, EN 1337-8:2007, EN 1337-2:2004, ENV 1991-1:1994, EN 1337-10:2003, EN 1337-6:2004, ENV 1994-2:1997, EN 60335-2-17:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1337-1:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1337-1:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lager im Bauwesen - Teil 1: Allgemeine RegelungenAppareils d'appui structuraux - Partie 1: Indications généralesStructural bearings - Part 1: General design rules91.010.30Technical aspectsICS:Ta slovenski standard je istoveten z:EN 1337-1:2000SIST EN 1337-1:2001en01-april-2001SIST EN 1337-1:2001SLOVENSKI
STANDARD
SIS
...