EN 3745-514:2009

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend

This standard specifies a method for measuring the combined torsion and bending properties of a fibre optic cable. It shall be used together with EN 3745-100.

Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 514: Kombinierte Torsions- und Biegeprüfung

Diese Norm legt ein Verfahren zur Messung der kombinierten Torsions- und Biegeeigenschaften eines LWL
fest. Die Norm ist in Verbindung mit EN 3475-100 anzuwenden.

Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d’essais - Partie 514 : Essais de torsion et de courbure

Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 514. del: Kombinirani preskus torzije in upogiba

General Information

• Status: Published
• Publication Date: 10-Feb-2009
• Withdrawal Date: 30-Aug-2009
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 2 - Electrical
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 11-Feb-2009
• Completion Date: 11-Feb-2009
• Ref Project: SIST EN 3745-514:2009 - Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 514: Kombinierte Torsions- und BiegeprüfungSérie aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d’essais - Partie 514 : Essais de torsion et de courbureAerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 514: Cable twist bend49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3745-514:2009SIST EN 3745-514:2009en01-maj-2009SIST EN 3745-514:2009SLOVENSKI
STANDARD



SIST EN 3745-514:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3745-514February 2009ICS 49.060 English VersionAerospace series - Fibres and cables, optical, aircraft use - Testmethods - Part 514: Cable twist bendSérie aérospatiale - Fibres et câbles optiques à usageaéronautique - Méthodes d'essais - Partie 514 : Essais detorsion et de courbureLuft- und Raumfahrt - Faseroptische Leitungen fürLuftfahrzeuge - Prüfverfahren - Teil 514: KombinierteTorsions- und BiegeprüfungThis European Standard was approved by CEN on 6 September 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3745-514:2009: ESIST EN 3745-514:2009



EN 3745-514:2009 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Preparation of specimens .44Apparatus .45Method .46Final measurements and requirements .6 SIST EN 3745-514:2009



EN 3745-514:2009 (E) 3 Foreword This document (EN 3745-514:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2009, and conflicting national standards shall be withdrawn at the latest by August 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3745-514:2009



EN
...