EN 4244:2020

Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D ≤ 200 mm - 1 000 MPa ≤ Rm ≤ 1 140 MPa

This document specifies the requirements relating to:
Heat resisting alloy FE-PM1708
Vacuum arc remelted
Hardened and tempered
Bars
a or D ≤ 200 mm
1 000 MPa ≤ Rm ≤ 1 140 MPa
for aerospace applications.

Luft- und Raumfahrt - Hochwarmfeste Legierung FE-PM1708 - Lichtbogenvakuumerschmolzen - Gehärtet und angelassen - Stangen - a oder D ≤ 200 mm - 1 000 MPa ≤ Rm ≤ 1 140 MPa

Dieses Dokument legt die Anforderungen an
Hochwarmfeste Legierung FE-PM1708
Lichtbogenvakuumerschmolzen
Gehärtet und angelassen
Stangen
a oder D ≤ 200 mm
1 000 MPa ≤ Rm ≤ 1 140 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Alliage résistant à chaud FE-PM1708 - Refondu sous vide par arc - Trempé et revenu - Barres - a ou D ≤ 200 mm - 1 000 MPa ≤ Rm ≤ 1 140 MPa

Le présent document spécifie les exigences relatives à :
Alliage résistant à chaud FE-PM1708
Refondu sous vide par arc
Trempé et revenu
Barres
a ou D ≤ 200 mm
1 000 MPa ≤ Rm ≤ 1 140 MPa
pour applications aérospatiales.

Aeronavtika - Toplotno odporna zlitina FE-PM1708 - Obločno pretaljeno v vakuumu - Utrjeno in mehko žarjeno - Palica - a ali D ≤ 200 mm - 1000 MPa ≤ Rm 1140 MPa

General Information

• Status: Published
• Publication Date: 25-Feb-2020
• Withdrawal Date: 30-Aug-2020
• ICS: 49.025.99 - Other materials
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 3 - Steels & Heat Resisting Alloys
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 26-Feb-2020
• Completion Date: 26-Feb-2020
• Ref Project: SIST EN 4244:2020 - Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bar - a or D ≤ 200 mm - 1000 MPa ≤ Rm 1140 MPa

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2020
Aeronavtika - Toplotno odporna zlitina FE-PM1708 - Obločno pretaljeno v
vakuumu - Utrjeno in mehko žarjeno - Palica - a ali D ≤ 200 mm - 1000 MPa ≤ Rm
1140 MPa
Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened
and tempered - Bar - a or D ≤ 200 mm - 1000 MPa ≤ Rm 1140 MPa
Luft- und Raumfahrt - Hichwarmfeste Legierung FE-PM1708 -
Lichtbogenvakuumerschmolzen - Gehärtet und angelassen - Stangen - a oder D ≤ 200
mm - 1000 MPa ≤ Rm ≤ 1140 Mpa
Série aérospatiale - Alliage résistant à chaud FE-PM1708 - Refondu sous vide par arc -
Trempé et revenu - Barres - a ou D ≤ 200 mm - 1000 MPa ≤ Rm 1140 MPa
Ta slovenski standard je istoveten z: EN 4244:2020
ICS:
49.025.99 Drugi materiali Other materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 4244
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2020
EUROPÄISCHE NORM
ICS 49.025.99
English Version
Aerospace series - Heat resisting alloy FE-PM1708 -
Vacuum arc remelted - Hardened and tempered - Bars - a
or D ≤ 200 mm - 1 000 MPa ≤ Rm ≤ 1 140 MPa
Série aérospatiale - Alliage résistant à chaud FE- Luft- und Raumfahrt - Hochwarmfeste Legierung FE-
PM1708 - Refondu sous vide par arc - Trempé et PM1708 - Lichtbogenvakuumerschmolzen - Gehärtet
revenu - Barres - a ou D ≤ 200 mm - 1 000 MPa ≤ Rm ≤ und angelassen - Stangen - a oder D ≤ 200 mm - 1 000
1 140 MPa
MPa ≤ Rm ≤ 1 140 MPa
This European Standard was approved by CEN on 18 November 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4244:2020 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 8

European foreword
This document (EN 4244:2020) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2020, and conflicting national standards shall
be withdrawn at the latest by August 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC I
...