EN 4538-003:2010
(Main)Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 003: Inch series with low friction coefficient
Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 003: Inch series with low friction coefficient
This standard specifies the characteristics of bearings, spherical plain in corrosion resisting steel with self lubricating liner, elevated load under low oscillations, with low friction coefficient, narrow series, inch series.
They shall be used in the temperature range - 54 °C to 120 °C.
Luft- und Raumfahrt - Gelenklager, aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, hohe Belastung, ohne Montagenut - Schmale Reihe - Maße und Belastungen - Teil 003: Inch-Reihe mit niedrigen Reibungskoeffizienten
Diese Norm legt die Merkmale von Gelenklagern aus korrosionsbeständigem Stahl mit selbstschmierender
Beschichtung für hohe Belastung, gering oszillierend, mit niedrigem Reibungsbeiwert, schmale Reihe, Inch-
Reihe fest.
Diese sind im Temperaturbereich −54 °C bis 120 °C zu verwenden.
Série Aérospatiale - Rotules, en acier résistant à la corrosion à garniture autolubrifiante à charge élevée sous faibles oscillations - Série étroite - Dimensions et charges - Partie 003 : Série en inches avec coefficient bas de friction
Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno oblogo in z zvišano obremenitvijo pod nizkimi nihanji - Ozki tip - Mere in nosilnosti - 003. del: Colski tip z nizkim koeficientom trenja
Ta standard določa značilnosti kroglastih drsnih ležajev iz korozijsko odpornega jekla s samomazalno oblogo in z zvišano obremenitvijo pod nizkimi nihanji z nizkim koeficientom trenja, ozke serije, colskega tipa. Uporabljajajo se v temperaturnem razponu -54 °C do 120 °C.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4538-003:2011
01-maj-2011
Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno
oblogo in z zvišano obremenitvijo pod nizkimi nihanji - Ozki tip - Mere in nosilnosti
- 003. del: Colski tip z nizkim koeficientom trenja
Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-
lubricating liner elevated load under low oscillations - Narrow series - Dimensions and
loads - Part 003: Inch series with low friction coefficient
Luft- und Raumfahrt - Gelenklager, aus korrosionsbeständigem Stahl mit
selbstschmierender Beschichtung Hohe Belastung ohne Montagenut - Schmale Reihe -
Maße und Belastungen - Teil 003: Inch Reihe mit niedrigen Reibungskoeffizienten
Série Aérospatiale - Rotules, en acier résistant à la corrosion à garniture autolubrifiante à
charge élevée sous faibles oscillations - Série étroite - Dimensions et charges - Partie
003 : Série en inches avec coefficient bas de friction
Ta slovenski standard je istoveten z: EN 4538-003:2010
ICS:
49.035 Sestavni deli za letalsko in Components for aerospace
vesoljsko gradnjo construction
SIST EN 4538-003:2011 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4538-003:2011
---------------------- Page: 2 ----------------------
SIST EN 4538-003:2011
EUROPEAN STANDARD
EN 4538-003
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2010
ICS 49.035
English Version
Aerospace series - Bearings, spherical plain, in corrosion
resisting steel with self-lubricating liner elevated load under low
oscillations - Narrow series - Dimensions and loads - Part 003:
Inch series with low friction coefficient
Série Aérospatiale - Rotules, en acier résistant à la Luft- und Raumfahrt - Gelenklager, aus
corrosion à garniture autolubrifiante à charge élevée sous
korrosionsbeständigem Stahl mit selbstschmierender
faibles oscillations - Série étroite - Dimensions et charges - Beschichtung Hohe Belastung ohne Montagenut - Schmale
Partie 003 : Série en inches avec coefficient bas de friction Reihe - Maße und Belastungen - Teil 003: Inch Reihe mit
niedrigen Reibungskoeffizienten
This European Standard was approved by CEN on 30 July 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4538-003:2010: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4538-003:2011
EN 4538-003:2010 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Symbols and definitions .4
4 Required characteristics .5
5 Designation . 11
6 Marking . 11
7 Technical specification .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.