SIST EN 4538-003:2011

Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 003: Inch series with low friction coefficient

This standard specifies the characteristics of bearings, spherical plain in corrosion resisting steel with self lubricating liner, elevated load under low oscillations, with low friction coefficient, narrow series, inch series. They shall be used in the temperature range - 54 °C to 120 °C.

Luft- und Raumfahrt - Gelenklager, aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung Hohe Belastung ohne Montagenut - Schmale Reihe - Maße und Belastungen - Teil 003: Inch Reihe mit niedrigen Reibungskoeffizienten

Diese Norm legt die Merkmale von Gelenklagern aus korrosionsbeständigem Stahl mit selbstschmierender
Beschichtung für hohe Belastung, gering oszillierend, mit niedrigem Reibungsbeiwert, schmale Reihe, Inch-
Reihe fest.
Diese sind im Temperaturbereich −54 °C bis 120 °C zu verwenden.

Série Aérospatiale - Rotules, en acier résistant à la corrosion à garniture autolubrifiante à charge élevée sous faibles oscillations - Série étroite - Dimensions et charges - Partie 003 : Série en inches avec coefficient bas de friction

Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno oblogo in z zvišano obremenitvijo pod nizkimi nihanji - Ozki tip - Mere in nosilnosti - 003. del: Colski tip z nizkim koeficientom trenja

Ta standard določa značilnosti kroglastih drsnih ležajev iz korozijsko odpornega jekla s samomazalno oblogo in z zvišano obremenitvijo pod nizkimi nihanji z nizkim koeficientom trenja, ozke serije, colskega tipa. Uporabljajajo se v temperaturnem razponu -54 °C do 120 °C.

General Information

• Status: Published
• Publication Date: 12-Apr-2011
• ICS: 49.035 - Components for aerospace construction
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 31-Mar-2011
• Due Date: 05-Jun-2011
• Completion Date: 13-Apr-2011
• Ref Project: EN 4538-003:2010 - Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 003: Inch series with low friction coefficient

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 4538-003:2011
01-maj-2011
Aeronavtika - Kroglasti drsni ležaji iz korozijsko odpornega jekla s samomazalno
oblogo in z zvišano obremenitvijo pod nizkimi nihanji - Ozki tip - Mere in nosilnosti
- 003. del: Colski tip z nizkim koeficientom trenja
Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-
lubricating liner elevated load under low oscillations - Narrow series - Dimensions and
loads - Part 003: Inch series with low friction coefficient
Luft- und Raumfahrt - Gelenklager, aus korrosionsbeständigem Stahl mit
selbstschmierender Beschichtung Hohe Belastung ohne Montagenut - Schmale Reihe -
Maße und Belastungen - Teil 003: Inch Reihe mit niedrigen Reibungskoeffizienten
Série Aérospatiale - Rotules, en acier résistant à la corrosion à garniture autolubrifiante à
charge élevée sous faibles oscillations - Série étroite - Dimensions et charges - Partie
003 : Série en inches avec coefficient bas de friction
Ta slovenski standard je istoveten z: EN 4538-003:2010
ICS:
49.035 Sestavni deli za letalsko in Components for aerospace
vesoljsko gradnjo construction
SIST EN 4538-003:2011 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 4538-003:2011

---------------------- Page: 2 ----------------------

SIST EN 4538-003:2011


EUROPEAN STANDARD
EN 4538-003

NORME EUROPÉENNE

EUROPÄISCHE NORM
November 2010
ICS 49.035
English Version
Aerospace series - Bearings, spherical plain, in corrosion
resisting steel with self-lubricating liner elevated load under low
oscillations - Narrow series - Dimensions and loads - Part 003:
Inch series with low friction coefficient
Série Aérospatiale - Rotules, en acier résistant à la Luft- und Raumfahrt - Gelenklager, aus
corrosion à garniture autolubrifiante à charge élevée sous
korrosionsbeständigem Stahl mit selbstschmierender
faibles oscillations - Série étroite - Dimensions et charges - Beschichtung Hohe Belastung ohne Montagenut - Schmale
Partie 003 : Série en inches avec coefficient bas de friction Reihe - Maße und Belastungen - Teil 003: Inch Reihe mit
niedrigen Reibungskoeffizienten
This European Standard was approved by CEN on 30 July 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4538-003:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 4538-003:2011
EN 4538-003:2010 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Symbols and definitions .4
4 Required characteristics .5
5 Designation . 11
6 Marking . 11
7 Technical specification . 11
2

---------------------- Page: 4 ----------------------

SIST EN 4538-003:2011
EN 4538-003:2010 (E)
Foreword
This document (EN 4538-003:2010) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of ASD,
prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2011, and conflicting national standards shall be withdrawn at the
latest by May 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

3

---------------------- Page: 5 ----------------------

SIST EN 4538-003:2011
EN 4538-003:2010 (E)
1 Scope
This standard specifies the characteristics of bearings, spherical plain in corrosion resisting steel with
self-lubricating liner, elevated load under low oscillations, with low friction coefficient, narrow series, inch series.
They shall be used in the temperature range – 54 °C to 120 °C.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
1)
EN 2030, Steel FE-PM43 — Hardened and tempered — Bars D ≤ 150 mm — Aerospace series
EN 2133, Aerospace series — Cadmium plating of steels with specified tensile strength ≤ 1 450 MPa, copper,
copper alloys and nickel alloys
EN 2424:2008, Aerospace series — Marking of aerospace products
EN 3161, Aerospace series — Steel FE-PM3801 (X5CrNiCu17-4) — Air melted — Solution treated and
precipitation treated — Bar — a or D ≤ 200 mm — R ≥ 930 MPa
m
EN 4540, Aerospace series — Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner —
2)
El
...