EN ISO 16851:2013

Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt (ISO 16851:2012)

ISO 16851:2012 specifies a method for determining the net length of an endless (spliced) conveyor belt.
It applies to all types of construction of conveyor belting with the exception of belts containing steel cord reinforcement. It is not suitable or valid for light conveyor belts described in ISO 21183-1.

Textilfördergurte - Bestimmung der Länge eines endlosen Fördergurtes (ISO 16851:2012)

Diese Internationale Norm legt ein Prüfverfahren zur Bestimmung der Länge eines endlosen Fördergurtes fest.
Es wird für alle Typen von Fördergurten angewendet mit Ausnahme von Gurten, die eine Verstärkung aus Stahlseilen enthalten, und es ist nicht geeignet oder gültig für leichte Fördergurte, die in ISO 21183-1 [3] beschrieben sind.

Courroies transporteuses à carcasse textile - Méthode de mesurage de la longueur nette d'une courroie transporteuse sans fin (jonctionnée) (ISO 16851:2012)

L'ISO 16851:2012 spécifie une méthode de détermination de la longueur nette des courroies transporteuses sans fin (jonctionnées).
Elle est applicable à tous les types de construction de courroies transporteuses à l'exception de celles ayant une carcasse en câble d'acier. Elle n'est pas appropriée ou valable pour les courroies transporteuses légères décrites dans l'ISO 21183‑1.

Naprave za kontinuirni transport - Tekstilni trakovi tračnih transporterjev - Postopek določanja dolžine brezkončnih trakov tračnih transporterjev (ISO 16851:2012)

Ta mednarodni standard opredeljuje postopek določanja dolžine brezkončnih trakov tračnih transporterjev. Uporablja se za vse vrste konstrukcij brezkončnih trakov z izjemo trakov z ojačitvenim železnim kablom. Ta mednarodni standard se ne uporablja oziroma ni veljaven za lahke trakove tračnih transporterjev, opisane v standardu ISO 21183-1.

General Information

• Status: Published
• Publication Date: 18-Jun-2013
• Withdrawal Date: 30-Dec-2013
• ICS: 53.040.20 - Components for conveyors
• Technical Committee: CEN/TC 188 - Conveyor belts
• Drafting Committee: CEN/TC 188/WG 1 - Technical test methods
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Jun-2013
• Completion Date: 19-Jun-2013
• Ref Project: SIST EN ISO 16851:2013 - Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt (ISO 16851:2012)

Relations

• Replaces: EN ISO 16851:2004 - Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor belt (ISO 16851:2004)
• Effective Date: 26-Jun-2013

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2013
1DGRPHãþD
SIST EN ISO 16851:2005
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7HNVWLOQLWUDNRYLWUDþQLKWUDQVSRUWHUMHY
3RVWRSHNGRORþDQMDGROåLQHEUH]NRQþQLKWUDNRYWUDþQLKWUDQVSRUWHUMHY,62

Textile conveyor belts - Determination of the net length of an endless (spliced) conveyor
belt (ISO 16851:2012)
Textilfördergurte - Bestimmung der Länge eines endlosen Fördergurtes (ISO
16851:2012)
Courroies transporteuses à carcasse textile - Méthode de mesurage de la longueur nette
d'une courroie transporteuse sans fin (jonctionnée) (ISO 16851:2012)
Ta slovenski standard je istoveten z: EN ISO 16851:2013
ICS:
53.040.20 Deli za transporterje Components for conveyors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 16851
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2013
ICS 53.040.20 Supersedes EN ISO 16851:2004
English Version
Textile conveyor belts - Determination of the net length of an
endless (spliced) conveyor belt (ISO 16851:2012)
Courroies transporteuses à carcasse textile - Méthode de Textilfördergurte - Bestimmung der Länge eines endlosen
mesurage de la longueur nette d'une courroie Fördergurtes (ISO 16851:2012)
transporteuse sans fin (jonctionnée) (ISO 16851:2012)
This European Standard was approved by CEN on 7 June 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 16851:2013: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 16851:2012 has been prepared by Technical Committee ISO/TC 41“Pulleys and belts
(including veebelts)” of the International Organization for Standardization (ISO) and has been taken over as
SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2013, and conflicting national standards shall be withdrawn
at the latest by December 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 16851:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 16851:2012 has been approved by CEN as EN ISO 16851:2013 without any modification.
INTERNATIONAL ISO
STANDARD 16851
Second edition
2012-12-01
Textile conveyor belts — Determination
of the net length of an endless (spliced)
conveyor belt
Courroies transporteuses à carcasse textile — Méthode de mesurage
de la longueur nette d’une courroie transporteuse sans fin (jonctionnée)
Reference number
ISO 16851:2012(E)
©
ISO 2012
ISO 16851:2012(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved

ISO 16851:2012(E)
Contents Page
Foreword .
...