EN ISO 7785-2:1997

Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995)

Specifies requirements and test methods for straight and geared angle dental hand instruments for application to patients. Contains also specifications on manufacturer's instructions, marking and packaging.

Zahnärztliche Handstücke - Teil 2: Gerade und abgewinkelte angetriebene Handstücke (ISO 7785-2:1995)

Dieser Teil der ISO 7785 legt die Anforderungen und Prüfmethoden für gerade und abgewinkelte angetriebene Handstücke für die Anwendung an Patienten fest. Er beinhaltet auch Anforderungen an die Herstelleranweisungen, Kennzeichnung und Verpackung. Die Handstücke werden von elektrischen oder luftbetriebenen Motoren betrieben.

Pièces à main dentaires - Partie 2: Pièces à main rectilignes et à contre-angles (ISO 7785-2:1995)

La présente partie de l'ISO 7785 fixe les prescriptions et les méthodes d'essai relatives aux pièces à main rectilignes et à contre-angles, utilisées pour les soins dentaires. Elle contient également des spécifications afférentes aux instructions du fabricant, à l'emballage et au marquage. Ces pièces à main sont actionnées par des moteurs électriques ou à air. Outre ces prescriptions, un certain nombre d'autres points relatifs aux matériaux, à la construction et à la conception générale des pièces à main ne peuvent pas faire l'objet de prescriptions ou d'évaluations objectives. Toutefois, si l'ensemble des prescriptions objectivement vérifiables sont satisfaites, on considère que ces différents points sont acceptables.

Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995)

General Information

• Status: Withdrawn
• Publication Date: 18-Nov-1997
• Withdrawal Date: 14-Sep-2012
• ICS: 11.060.20 - Dental equipment
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Sep-2012
• Completion Date: 15-Sep-2012
• Ref Project: SIST EN ISO 7785-2:2000 - Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995)

Relations

• Replaced By: EN ISO 14457:2012 - Dentistry - Handpieces and motors (ISO 14457:2012)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 7785-2:2000
01-januar-2000
Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-
2:1995)
Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995)
Zahnärztliche Handstücke - Teil 2: Gerade und abgewinkelte angetriebene Handstücke
(ISO 7785-2:1995)
Pieces a main dentaires - Partie 2: Pieces a main rectilignes et a contre-angles (ISO
7785-2:1995)
Ta slovenski standard je istoveten z: EN ISO 7785-2:1997
ICS:
11.060.20 =RERWHKQLþQDRSUHPD Dental equipment
SIST EN ISO 7785-2:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 7785-2:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 7785-2:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 7785-2:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 7785-2:2000

---------------------- Page: 5 ----------------------

SIST EN ISO 7785-2:2000

---------------------- Page: 6 ----------------------

SIST EN ISO 7785-2:2000
INTERNATIONAL Is0
STANDARD 7785-2
Second edition
1995-08-01
Dental handpieces -
Part 2:
Straight and geared angle handpieces
Pi&es 9 main dentaires -
Pat-tie 2: Pikes B main rectilignes et ;j contre-angles
Reference number
IS0 7785-2:1995(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 7785-2:2000
IS0 7785-2: 1995(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an lnternationai
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard IS0 7785-Z was prepared by Technical Committee
ISO/TC 106, Dentistry, Subcommittee SC 4, Dental instruments.
This second edition cancels and replaces the first edition
(IS0 7785-2:1991), of which it constitutes a technical revision.
IS0 7785 consists of the following parts, under the general title Dental
handpieces:
- Part 7: High-speed air turbine handpieces
- Part 2: Straight and geared angle handpieces
0 IS0 1995
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 7785-2:2000
0 IS0
IS0 7785-2:1995(E)
Introduction
As handpieces are complex constructions, it is not possible to specify all
details even though they are important. Sometimes only general specifi-
cations are possible, and it is the responsibility of the manufacturer to
make the relevant decisions to achieve a safe and reliable product.
This part of IS0 7785 takes priority over IEC 601-I :I 988 as specified in the
individual clauses of this part of IS0 7785.
Only the specifications laid down in this part of IS0 7785 apply.
This part of IS0 7785 refers to IEC 601-I :I 988, the basic standard on
safety of medical electrical equipment, wherever relevant, by stating the
respective clause numbers of IEC 601-I :I 988.

---------------------- Page: 9 ----------------------

SIST EN ISO 7785-2:2000
This page intentionally left blank

---------------------- Page: 10 ----------------------

SIST EN ISO 7785-2:2000
INTERNATIONAL STANDARD Q IS0 IS0 7785=2:1995(E)
Dental handpieces -
Part 2:
Straight and geared angle handpieces
IS0 1942-3: 1989, Dental vocabulary - Part 3: Dental
1 Scope
instruments.
This part of IS0 7785 specifies requirements and test
IS0 3696: 1987, Water for analytical laboratory use -
methods for straight and geared angle handpieces for
Specification and test methods.
application to patients. It also contains specifications
on manufacturer’s instructions, marking and packag-
IS0 3964:1982, Dental handpieces - Coupling di-
ing. These handpieces are operated by electrical or
mens/ons.
air-driven motors. In addition to these specified re-
quirements, there are several other aspects of the
IS0 6507-2:1983, Metallic
...