EN 71-3:2013+A2:2017/prA3

Safety of toys - Part 3: Migration of certain elements

This European Standard specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, chromium (III), chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE   See guidance document of the European Commission guidance document no. 12 [2] on the application of the Directive on the safety of toys - packaging.
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
   Category I: Dry, brittle, powder like or pliable materials;
-   Category II: Liquid or sticky materials;
-   Category III: Scraped-off materials.
The requirements of this standard do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
For the purposes of this standard, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
-   All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorised as toys may be sucked, licked or swallowed;
-   All the accessible parts and components of toys intended for children up to 6 years of age may come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

Sicherheit von Spielzeug - Teil 3: Migration bestimmter Elemente

Sécurité des jouets - Partie 3 : Migration de certains éléments

Varnost igrač - 3. del: Migracija določenih elementov - Dopolnilo A3

General Information

• Status: Not Published
• ICS: 97.200.50 - Toys
• Technical Committee: CEN/TC 52 - Safety of toys
• Drafting Committee: CEN/TC 52/WG 5 - Safety of toys - Chemical toys
• Current Stage: 4060 - Closure of enquiry - Enquiry
• Start Date: 11-Jan-2018
• Due Date: 10-May-2018
• Completion Date: 11-Jan-2018
• Directive: 2009/48/EC - DIRECTIVE 2009/48/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 18 June 2009 on the safety of toys
• Mandate: M/445 - Standardisation mandate addressed to CEN and CENELEC within the framework of Directive 2009/48/EC revising Directive 88/378/EEC concerning the safety of Toys
• Ref Project: SIST EN 71-3:2013+A2:2017/oprA3:2017 - Safety of toys - Part 3: Migration of certain elements

Relations

• Merged Into: EN 71-3:2013+A3:2018 - Safety of toys - Part 3: Migration of certain elements
• Effective Date: 19-Jan-2023
• Amends: EN 71-3:2013+A2:2017 - Safety of toys - Part 3: Migration of certain elements
• Effective Date: 23-Aug-2017
• Amends: EN 71-3:2013+A1:2014 - Safety of toys - Part 3: Migration of certain elements
• Effective Date: 30-Jul-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2017
9DUQRVWLJUDþGHO0LJUDFLMDGRORþHQLKHOHPHQWRY'RSROQLOR$
Safety of toys - Part 3: Migration of certain elements
Sicherheit von Spielzeug - Teil 3: Migration bestimmter Elemente
Sécurité des jouets - Partie 3 : Migration de certains éléments
Ta slovenski standard je istoveten z: EN 71-3:2013+A2:2017/prA3
ICS:
97.200.50 ,JUDþH Toys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
EN 71-3:2013+A2:2017
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA3
October 2017
ICS 97.200.50
English Version
Safety of toys - Part 3: Migration of certain elements

This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 52.

This draft amendment A3, if approved, will modify the European Standard EN 71-3:2013+A2:2017. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 71-3:2013+A2:2017/prA3:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Modification to 4.2, Specific requirements .
...