CEN/TC 52/WG 5 - Safety of toys - Chemical toys

This document specifies a test method for categorization of slime-type products to support users of EN 71-3 in the categorization of products with slime-like behaviour into material categories 1 (dry, brittle, powder-like or pliable toy material) or 2 (liquid or sticky toy material).

This document specifies requirements for the maximum amount, and in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities.
These substances and mixtures are:
-   those classified as hazardous by the EC-legislation applying to hazardous substances and hazardous mixtures [1];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the experimental set.
This document applies to experimental sets for chemistry and related activities including crystal growing sets, carbon dioxide generating experimental sets and supplementary sets. It also covers sets for chemical experiments within the fields of mineralogy, biology, physics, microscopy and environmental science whenever they contain one or more chemical substances and/or mixtures which are classified as hazardous according to Regulation (EC) No. 1272/2008 [1].
This document also specifies requirements for marking, a contents list, instructions for use, eye protection and for the equipment intended for carrying out the experiments.
This document does not apply to combined sets, e.g. a combination of a chemistry set and a crystal growing set. It also does not apply to toys that are covered by EN 71-13 (e.g. cosmetic kits). Requirements for certain other chemical toys are given in EN 71-5.
NOTE   The terms "substance" and "preparation", are used in the "REACH Regulation", Regulation (EC) No. 1907/2006 [2]. According to the Globally Harmonized System (GHS) of classification and labelling of chemicals, which in the European Union has been enacted by Regulation (EC) No. 1272/2008 (classification, labelling and packaging of substances and mixtures) [1], the timetable for the introduction of GHS is followed. The words "preparation" and "mixture" are considered synonymous; both are a mixture or solution of substances that do not react with each other. The old term "preparation" will be replaced by the new term "mixture" in due course. In this document, only the term "mixture" is used.

This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.

This European Standard specifies the requirements and test methods for N nitrosamines and N nitrosatable substances for:
   toys and parts of toys made from elastomers and intended for use by children under 36 months;
   toys and parts of toys made from elastomers and intended to be placed in the mouth;
   finger paints for children under 36 months.
EXAMPLES   Examples of toys made from elastomers are balloons and teethers.

This Technical Report presents the results of a European Study on “Children's mouthing behaviour in contact with toys”. It provides statistical data on the duration and frequency that children under 36 months introduce toys into their mouths and estimated data on the time children under 36 months spend mouthing toys each day.
Furthermore, it provides information on:
-   the literature focused on children's mouthing behaviour, including commonly used methodologies and significant results;
-   the design and methodology of the study;
-   the data on the children and toy sample;
-   the forms used in data collection.

This European Standard specifies requirements and test methods for the substances and materials used in chemical toys (sets) other than experimental sets. These substances and mixtures are:
   those classified as dangerous by the EC-legislation applying to dangerous substances and dangerous mixtures [5];
   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the above mentioned legislation; and
   any other chemical substance(s) and mixture(s) delivered with the chemical toy.
NOTE   The terms “substance” and “mixture” are defined in the REACH regulation No. (EC)1907/2006 and in the CLP regulation (EC) No. 1272/2008.
Additionally, requirements are specified for markings, warnings, safety rules, contents list, instructions for use and first aid information.
This Part of EN 71 applies to:
   plaster of Paris (gypsum) moulding sets;
   ceramic and vitreous enamelling materials supplied in miniature workshop sets;
   oven-hardening plasticised PVC modelling clay sets;
   plastic moulding sets;
   embedding sets;
   adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents), supplied or recommended in model sets.

This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.
NOTE   EN 71-3 and EN 71-12 specify requirements and test methods for finger paints for the migration of certain elements (see F.4) and N-nitrosamines (see F.9).

This document specifies requirements and test methods for toy materials (substances and mixtures) used in chemical toys (sets) other than experimental sets. These substances and mixtures are:
-   those classified as dangerous by the EU legislation applying to dangerous substances and dangerous mixtures [5];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the chemical toy.
NOTE   The terms "substance" and "mixture" are defined in the REACH regulation No. (EC)1907/2006 and in the CLP regulation (EC) No. 1272/2008.
Additionally, requirements are specified for markings, warnings, safety rules, contents list, instructions for use and first aid information.
This document applies to:
-   plaster of Paris (gypsum) moulding sets;
-   oven-hardening plasticised PVC modelling clay sets;
-   polystyrene granules sets;
-   embedding sets;
-   adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents), supplied or recommended in model sets;
-   slime kits.

This document applies to olfactory board games, cosmetic kits, gustative games and supplementary sets. It specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits.
These substances and mixtures are:
-   those classified as hazardous by the EC-legislation applying to hazardous substances [13] and hazardous mixtures [13];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the set.
Furthermore, this document specifies allergenic fragrances which are prohibited in toys, marking requirements, in particular regarding allergenic fragrances, and requirements on a contents list, instructions for use, the equipment intended to be used during the activity and the use of highly flammable liquids.
This document does not apply to cosmetic toys such as play cosmetics for dolls.
NOTE   The terms "substance" and "mixture" are defined in the REACH regulation (EC) No. 1907/2006 [14] and in the CLP regulation (EC) No. 1272/2008 [13].

This document specifies requirements for the maximum amount, and in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities.
These substances and mixtures are:
-   those classified as hazardous by the EC-legislation applying to hazardous substances and hazardous mixtures [1];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the experimental set.
This document applies to experimental sets for chemistry and related activities including crystal growing sets, carbon dioxide generating experimental sets and supplementary sets. It also covers sets for chemical experiments within the fields of mineralogy, biology, physics, microscopy and environmental science whenever they contain one or more chemical substances and/or mixtures which are classified as hazardous according to Regulation (EC) No. 1272/2008 [1].
This document also specifies requirements for marking, a contents list, instructions for use, eye protection and for the equipment intended for carrying out the experiments.
This document does not apply to combined sets, e.g. a combination of a chemistry set and a crystal growing set. It also does not apply to toys that are covered by EN 71-13 (e.g. cosmetic kits). Requirements for certain other chemical toys are given in EN 71-5.
NOTE   The terms "substance" and "preparation", are used in the "REACH Regulation", Regulation (EC) No. 1907/2006 [2]. According to the Globally Harmonized System (GHS) of classification and labelling of chemicals, which in the European Union has been enacted by Regulation (EC) No. 1272/2008 (classification, labelling and packaging of substances and mixtures) [1], the timetable for the introduction of GHS is followed. The words "preparation" and "mixture" are considered synonymous; both are a mixture or solution of substances that do not react with each other. The old term "preparation" will be replaced by the new term "mixture" in due course. In this document, only the term "mixture" is used.

This document specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, Chromium (III), Chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1   See the European Commission guidance document no. 12 on the application of the Directive on the safety of toys - packaging [2].
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
-   Category I: Dry, brittle, powder like or pliable materials;
-   Category II: Liquid or sticky materials;
-   Category III: Scraped-off materials.
The requirements of this document do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2   For the purposes of this document, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
-   All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
-   All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

This document applies to olfactory board games, cosmetic kits, gustative games and supplementary sets. It specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits.
These substances and mixtures are:
-   those classified as hazardous by the EC-legislation applying to hazardous substances [13] and hazardous mixtures [13];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the set.
Furthermore, this document specifies allergenic fragrances which are prohibited in toys, marking requirements, in particular regarding allergenic fragrances, and requirements on a contents list, instructions for use, the equipment intended to be used during the activity and the use of highly flammable liquids.
This document does not apply to cosmetic toys such as play cosmetics for dolls.
NOTE   The terms "substance" and "mixture" are defined in the REACH regulation (EC) No. 1907/2006 [14] and in the CLP regulation (EC) No. 1272/2008 [13].

This document specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, Chromium (III), Chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1   See the European Commission guidance document no. 12 on the application of the Directive on the safety of toys - packaging [2].
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
-   Category I: Dry, brittle, powder like or pliable materials;
-   Category II: Liquid or sticky materials;
-   Category III: Scraped-off materials.
The requirements of this document do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2   For the purposes of this document, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
-   All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
-   All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

This European Standard specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, chromium (III), chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE   See guidance document of the European Commission guidance document no. 12 [2] on the application of the Directive on the safety of toys - packaging.
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
   Category I: Dry, brittle, powder like or pliable materials;
-   Category II: Liquid or sticky materials;
-   Category III: Scraped-off materials.
The requirements of this standard do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
For the purposes of this standard, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
-   All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorised as toys may be sucked, licked or swallowed;
-   All the accessible parts and components of toys intended for children up to 6 years of age may come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

2019-12-09: HAS assessment missing at ENQ. Request submitted to HAS Livelink platform with deadline: 2020-01-29.

This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.

This European Standard specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, chromium (III), chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1   See guidance document of the European Commission guidance document no. 12 [2] on the application of the Directive on the safety of toys – packaging.
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
-   Category I: Dry, brittle, powder like or pliable materials;
-   Category II: Liquid or sticky materials;
-   Category III: Scraped-off materials.
The requirements of this standard do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2    For the purposes of this standard, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
-   All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorised as toys can be considered to be sucked, licked or swallowed;
-   All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

This document specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, Chromium (III), Chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1   See the European Commission guidance document no. 12 on the application of the Directive on the safety of toys - packaging [2].
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
-   Category I: Dry, brittle, powder like or pliable materials;
-   Category II: Liquid or sticky materials;
-   Category III: Scraped-off materials.
The requirements of this document do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2   For the purposes of this document, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
-   All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
-   All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

This document applies to olfactory board games, cosmetic kits, gustative games and supplementary sets. It specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits.
These substances and mixtures are:
-   those classified as hazardous by the EC-legislation applying to hazardous substances [13] and hazardous mixtures [13];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the set.
Furthermore, this document specifies allergenic fragrances which are prohibited in toys, marking requirements, in particular regarding allergenic fragrances, and requirements on a contents list, instructions for use, the equipment intended to be used during the activity and the use of highly flammable liquids.
This document does not apply to cosmetic toys such as play cosmetics for dolls.
NOTE   The terms "substance" and "mixture" are defined in the REACH regulation (EC) No. 1907/2006 [14] and in the CLP regulation (EC) No. 1272/2008 [13].

This Part 9 of the document EN 71 for safety of toys specifies requirements for the migration or content of certain hazardous organic chemical compounds from/in certain toys and toy materials (see Table 1) by the following exposure routes:
- mouthing
- ingestion
- skin contact
- eye contact
- inhalation
when used as intended or in a foreseeable way, bearing in mind the normal behaviour of children and the function and design of the toy.
This document does not contain requirements for chemical toys, experimental sets or finger-paints, which are addressed by other parts of EN 71.
Packaging materials used with toys are not within the scope of the document unless they form part of the toy or have intended play value.

This document applies to olfactory board games, cosmetic kits, gustative games and supplementary sets. It specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits.
These substances and mixtures are:
-   those classified as hazardous by the EC-legislation applying to hazardous substances [13] and hazardous mixtures [13];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as hazardous by the above-mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the set.
Furthermore, this document specifies allergenic fragrances which are prohibited in toys, marking requirements, in particular regarding allergenic fragrances, and requirements on a contents list, instructions for use, the equipment intended to be used during the activity and the use of highly flammable liquids.
This document does not apply to cosmetic toys such as play cosmetics for dolls.
NOTE   The terms "substance" and "mixture" are defined in the REACH regulation (EC) No. 1907/2006 [14] and in the CLP regulation (EC) No. 1272/2008 [13].

This European Standard applies to olfactory board games, cosmetic kits, gustative games and supplementary sets. It specifies requirements on the use of substances and mixtures and in some cases on their amount and concentration in olfactory board games, cosmetic kits, gustative games and supplementary sets to such games or kits.
These substances and mixtures are:
-   those classified as dangerous by the EC-legislation applying to dangerous substances [15, 16], and dangerous mixtures [17];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the above mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the set.
Furthermore, this European Standard specifies allergenic fragrances which are prohibited in toys, marking requirements, in particular regarding allergenic fragrances, and requirements on a contents list, instructions for use, the equipment intended to be used during the activity and the use of highly flammable liquids.
This European Standard does not apply to cosmetic toys such as play cosmetics for dolls.
NOTE   The terms "substance" and "mixture" are defined in the REACH regulation (EC) No. 1907/2006 [18] and in the CLP regulation (EC) No. 1272/2008 [16].

This document specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, Chromium (III), Chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1   See the European Commission guidance document no. 12 on the application of the Directive on the safety of toys - packaging [2].
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
-   Category I: Dry, brittle, powder like or pliable materials;
-   Category II: Liquid or sticky materials;
-   Category III: Scraped-off materials.
The requirements of this document do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2   For the purposes of this document, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
-   All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
-   All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

This European Standard specifies requirements for the maximum amount and, in some cases, the maximum concentration of certain substances and mixtures used in experimental sets for chemistry and related activities.
These substances and mixtures are:
-   those classified as dangerous by the EC-legislation applying to dangerous substances [1], [2] and dangerous mixtures [2], [3];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the above mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the experimental set.
This standard applies to experimental sets for chemistry and related activities including crystal growing sets, carbon dioxide generating experimental sets and supplementary sets. It also covers sets for chemical experiments within the fields of mineralogy, biology, physics, microscopy and environmental science whenever they contain one or more chemical substances and/or mixtures which are classified as hazardous according to Regulation (EC) No. 1272/2008/EC [2].
This standard also specifies requirements for marking, a contents list, instructions for use, eye protection and for the equipment intended for carrying out the experiments.
This standard does not apply to toys that are covered by EN 71-13 (e.g. cosmetic kits). Requirements for certain other chemical toys are given in EN 71-5.
NOTE   The terms "substance" and "preparation", as used in Directives 67/548/EEC [1] and 1999/45/EC [3], are also used in the "REACH Regulation", Regulation (EC) No. 1907/2006 [4]. According to the Globally Harmonised System (GHS) of classification and labelling of chemicals, which in the European Union has been enacted by Regulation (EC) No. 1272/2008 (classification, labelling and packaging of substances and mixtures) [2], the timetable for the introduction of GHS has to be followed.
The words "preparation" and "mixture" should be considered synonymous; both are a mixture or solution of substances that do not react with each other. The old term "preparation" will be replaced by the new term "mixture" in due course. In this standard, only the term "mixture" is used.

This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.

This European Standard specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, chromium (III), chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1   See guidance document of the European Commission guidance document no. 12 [2] on the application of the Directive on the safety of toys – packaging.
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
—   Category I: Dry, brittle, powder like or pliable materials;
—   Category II: Liquid or sticky materials;
—   Category III: Scraped-off materials.
The requirements of this standard do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2   For the purposes of this standard, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
—   all toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
—   all the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

This European Standard specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, chromium (III), chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1   See guidance document of the European Commission guidance document no. 12 [2] on the application of the Directive on the safety of toys – packaging.
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
—   Category I: Dry, brittle, powder like or pliable materials;
—   Category II: Liquid or sticky materials;
—   Category III: Scraped-off materials.
The requirements of this standard do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2   For the purposes of this standard, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
—   all toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorized as toys can be considered to be sucked, licked or swallowed;
—   all the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

This European Standard specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, chromium (III), chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1   See guidance document of the European Commission guidance document no. 12 [2] on the application of the Directive on the safety of toys - packaging.
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
-   Category I: Dry, brittle, powder like or pliable materials;
-   Category II: Liquid or sticky materials;
-   Category III: Scraped-off materials.
The requirements of this standard do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2    For the purposes of this standard, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
-   All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorised as toys can be considered to be sucked, licked or swallowed;
-   All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.

This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.

This European Standard specifies requirements and test methods for the migration of aluminium, antimony, arsenic, barium, boron, cadmium, chromium (III), chromium (VI), cobalt, copper, lead, manganese, mercury, nickel, selenium, strontium, tin, organic tin and zinc from toy materials and from parts of toys.
Packaging materials are not considered to be part of the toy unless they have intended play value.
NOTE 1   See guidance document of the European Commission guidance document no. 12 [2] on the application of the Directive on the safety of toys – packaging.
The standard contains requirements for the migration of certain elements from the following categories of toy materials:
-   Category I: Dry, brittle, powder like or pliable materials;
-   Category II: Liquid or sticky materials;
-   Category III: Scraped-off materials.
The requirements of this standard do not apply to toys or parts of toys which, due to their accessibility, function, volume or mass, clearly exclude any hazard due to sucking, licking or swallowing or prolonged skin contact when the toy or part of toy is used as intended or in a foreseeable way, bearing in mind the behaviour of children.
NOTE 2    For the purposes of this standard, for the following toys and parts of toys the likelihood of sucking, licking or swallowing toys is considered significant (see H.2 and H.3):
-   All toys intended to be put in the mouth or to the mouth, cosmetics toys and writing instruments categorised as toys can be considered to be sucked, licked or swallowed;
-   All the accessible parts and components of toys intended for children up to 6 years of age can be considered to come into contact with the mouth. The likelihood of mouth contact with parts of toys intended for older children is not considered significant in most cases (see H.2).

This European Standard specifies the requirements and test methods for N-nitrosamines and N-nitrosatable substances for:
-   toys and parts of toys made from elastomers and intended for use by children under 36 months;
-   toys and parts of toys made from elastomers and intended to be placed in the mouth;
-   finger paints for children under 36 months.
EXAMPLES   Examples of toys made from elastomers are balloons and teethers.

This European Standard specifies requirements and test methods for the substances and materials used in chemical toys (sets) other than experimental sets. These substances and mixtures are:
-   those classified as dangerous by the EC-legislation applying to dangerous substances and dangerous mixtures [5];
-   substances and mixtures which in excessive amounts could harm the health of the children using them and which are not classified as dangerous by the above mentioned legislation; and
-   any other chemical substance(s) and mixture(s) delivered with the chemical toy.
NOTE   The terms "substance" and "mixture" are defined in the REACH regulation No. (EC)1907/2006 and in the CLP regulation (EC) No. 1272/2008.
Additionally, requirements are specified for markings, warnings, safety rules, contents list, instructions for use and first aid information.
This Part of EN 71 applies to:
-   plaster of Paris (gypsum) moulding sets;
-   ceramic and vitreous enamelling materials supplied in miniature workshop sets;
-   oven-hardening plasticised PVC modelling clay sets;
-   plastic moulding sets;
-   embedding sets;
-   adhesives, paints, lacquers, varnishes, thinners and cleaning agents (solvents), supplied or recommended in model sets.

This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.

· the replacement of the carcinogenic and toxic for reproduction substances from table 1 to 15 (see also docs WG 5 N 317 and N 336) with safer alternatives, if appropriate;·   
- the updating of the classifications and the addition of the environmental danger symbol for information, if appropriate; ·   
- updating of the normative references;·   
- requirements for BTX in oven hardening plasticized PVC modelling clay sets and plastic moulding sets (polystyrene granules) (in analogy with corresponding method in EN 71-5:1993/prA1).

Migrated from Progress Sheet (TC Comment) (2000-07-10): TC forecasts modified (TC resolution 48/2000, 2000-05-05)

This part of EN 71 specifies requirements for the substances and materials used in chemical toys (sets)  other than experimental sets. It specifies:   -  the maximum amounts of substances and preparations classified as dangerous by the definitions in Directives 67/548/EEC* (with             subsequent amendments and adaptations) and 88/379/EEC* (with subsequent amendments and adaptations); and  -  the maximum amounts of substances and preparations which in excessive amounts may harm the health of children using them and             which are not covered by the above mentioned Directives; and   - the maximum amounts for other substances or preparations delivered with the toy.  Additionally, requirements are specified for markings, warnings, safety rules, contents lists, instructions for use and first aid information.  This part of EN 71 applies to:  - plaster of Paris (gypsum) moulding sets; - ceramic and vitreous enamelling materials supplied in miniature workshop              sets; - oven hardening plasticized PVC modelling clay sets; - plastic moulding sets; - embedding sets; - photographic developing sets; - adhesives, paints, lacquers, varnishes, thinners and cleaning agents              (solvents), supplied or recommended in model sets.  * Differing legal requirements may exist in non-EC countries

Replacement of the carcinogenic and toxic-for-reproduction substances from table 1 with safer alternatives; updating of the classifications; addition of the environmental danger symbol for information; if applicable, the test method for borosilicate glassware of EN 71-1.

Migrated from Progress Sheet (TC Comment) (2000-07-10): TC forecasts provided (res. 35/1999) ++ TC forecasts modified (TC Resolution 48/2000, 2000-05-05)

Migrated from Progress Sheet (TC Comment) (2000-07-10): Extension of St. 49 to 97-04 according to Res. 16/1996 (NT/961115) ++ !!At Publication document only mandated for Commission and not for EFTA ++ be careful in the forward (DL 98.01.05)

See Part 1 of this European Standard.  This part includes requirements for:  - the maximum amounts of substances and preparations classified as dangerous within the definitions contained in Directives 67/548/EEC (with subsequent amendments and adaptations) and 88/379/EEC (with subsequent amendments and adaptations); and  - the maximum amounts of substances and preparations which in excessive amounts may harm the health of the children using them and which are not covered by the above mentioned Directives; and  - the maximum amounts of any other chemical substances delivered with the toy.