EN ISO 10426-1:2000/A1:2002

Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2000/Amd 1:2002)

Erdöl- und Erdgasindustrien - Zemente und Materialien für die Zementation von Tiefbohrungen - Teil 1: Anforderungen (ISO 10426-1:2000/Amd 1:2002)

Industries du pétrole et du gaz naturel - Ciments et matériaux pour la cimentation des puits - Partie 1: Spécifications (ISO 10426-1:2000/Amd 1:2002)

Petroleum and natural gas industries - Cements and materials for well cementing – Part 1: Specification (ISO 10426-1:2000/Amd1:2002)

General Information

• Status: Withdrawn
• Publication Date: 31-Jul-2002
• Withdrawal Date: 24-Oct-2006
• ICS: 75.020 - Extraction and processing of petroleum and natural gas
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• Technical Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Drafting Committee: CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 25-Oct-2006
• Completion Date: 25-Oct-2006
• Ref Project: SIST EN ISO 10426-1:2000/A1:2004 - Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2000/Amd 1:2002)

Relations

• Amends: EN ISO 10426-1:2000 - Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2000)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 10426-1:2006 - Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2005)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 10426-1:2000/A1:2004
01-maj-2004
Petroleum and natural gas industries - Cements and materials for well cementing –
Part 1: Specification (ISO 10426-1:2000/Amd1:2002)
Petroleum and natural gas industries - Cements and materials for well cementing - Part
1: Specification (ISO 10426-1:2000/Amd 1:2002)
Erdöl- und Erdgasindustrien - Zemente und Materialien für die Zementation von
Tiefbohrungen - Teil 1: Anforderungen (ISO 10426-1:2000/Amd 1:2002)
Industries du pétrole et du gaz naturel - Ciments et matériaux pour la cimentation des
puits - Partie 1: Spécifications (ISO 10426-1:2000/Amd 1:2002)
Ta slovenski standard je istoveten z: EN ISO 10426-1:2000/A1:2002
ICS:
75.180.10 Oprema za raziskovanje in Exploratory and extraction
odkopavanje equipment
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
SIST EN ISO 10426-1:2000/A1:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 10426-1:2000/A1:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 10426-1:2000/A1:2004
EUROPEAN STANDARD
EN ISO 10426-1:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2002
ICS 75.020; 91.100.10
English version
Petroleum and natural gas industries - Cements and materials
for well cementing - Part 1: Specification (ISO 10426-
1:2000/Amd 1:2002)
Industries du pétrole et du gaz naturel - Ciments et Erdöl- und Erdgasindustrien - Zemente und Materialien für
matériaux pour la cimentation des puits - Partie 1: die Zementation von Tiefbohrungen - Teil 1: Anforderungen
Spécifications (ISO 10426-1:2000/Amd 1:2002) (ISO 10426-1:2000/Amd 1:2002)
This amendment A1 modifies the European Standard EN ISO 10426-1:2000; it was approved by CEN on 10 July 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10426-1:2000/A1:2002 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 10426-1:2000/A1:2004
EN ISO 10426-1:2000/A1:2002 (E)
Foreword
This document (EN ISO 10426-1:2000/A1:2002) has been prepared by Technical Committee
ISO/TC 67 "Materials, equipment and offshore structures for petroleum and natural gas
industries" in collaboration with Technical Committee CEN/TC 12 "Materials, equipment and
offshore structures for petroleum and natural gas industries", the secretariat of which is held
by AFNOR.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by February 2003, and conflicting national
standards shall be withdrawn at the latest by February 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the
United Kingdom.
Endorsement notice
The text of the International Standard ISO 10426-1:2000/Amd 1:2002 has been approved by
CEN as a European Standard without any modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 10426-1:2000/A1:2004


INTERNATIONAL ISO
STANDARD 10426-1
First edition
2000-03-15
AMENDMENT 1
2002-08-01
Petroleum and natural gas industries —

Cements and materials for well

cementing —
Part 1:
Specification
AMENDMENT 1
Industries du pétrole et du gaz naturel — Ciments et matériaux pour la
cimentation des puits —
Partie 1: Spécifications
AMENDEMENT 1




Reference number
ISO 10426-1:2000/Amd.1:2002(E)
©
 ISO 2002

---------------------- Page: 5 ----------------------

SIST EN ISO 10426-1:2000/A1:2004
ISO 10426-1:2000/Amd.1:2002(E)
PDF disclaimer
This PDF file may contain embedded t
...