EN ISO 10426-3:2019
(Main)Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations (ISO 10426-3:2019)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations (ISO 10426-3:2019)
This document provides procedures for testing well cements and cement blends for use in the petroleum and natural gas industries in a deepwater environment, or areas with a low seafloor temperature, or areas where low well temperatures exist.
This document supplements API RP 10B-3, 2nd edition (2016), the requirements of which are applicable with the exceptions specified in this document.
This document excludes the mitigation of shallow water flow in deepwater wells.
NOTE This is addressed in API RP 65.
Erdöl- und Erdgasindustrie - Zemente und Materialien für die Zementation von Tiefbohrungen - Teil 3: Prüfung von Unterwasser-Bohrlochzement (ISO 10426-3:2019)
Industries du pétrole et du gaz naturel - Ciments et matériaux pour la cimentation des puits - Partie 3: Essais de formulations de ciment pour puits en eau profonde (ISO 10426-3:2019)
Industrija za predelavo nafte in zemeljskega plina - Cementi in materiali za cementiranje vrtin - 3. del: Preskušanje sestave cementov za globokomorske vrtine (ISO 10426-3:2019)
Ta dokument določa postopke za preskušanje cementov za vrtine in cementnih mešanic za uporabo v industriji za predelavo nafte in zemeljskega plina v globokomorskem okolju ali na območjih z nizko temperaturo morskega dna oziroma območjih, kjer je prisotna nizka temperatura vrtine. Ta dokument dopolnjuje 2. izdajo standarda API RP 10B-3 (2016), katerega zahteve se uporabljajo za izjeme, določene v tem dokumentu. Ta dokument ne vključuje ublažitve toka plitke vode v globokomorskih vrtinah.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 10426-3:2019
01-december-2019
Nadomešča:
SIST EN ISO 10426-3:2005
Industrija za predelavo nafte in zemeljskega plina - Cementi in materiali za
cementiranje vrtin - 3. del: Preskušanje sestave cementov za globokomorske
vrtine (ISO 10426-3:2019)
Petroleum and natural gas industries - Cements and materials for well cementing - Part
3: Testing of deepwater well cement formulations (ISO 10426-3:2019)
Erdöl- und Erdgasindustrie - Zemente und Materialien für die Zementation von
Tiefbohrungen - Teil 3: Prüfung von Unterwasser-Bohrlochzement (ISO 10426-3:2019)
Industries du pétrole et du gaz naturel - Ciments et matériaux pour la cimentation des
puits - Partie 3: Essais de formulations de ciment pour puits en eau profonde (ISO 10426
-3:2019)
Ta slovenski standard je istoveten z: EN ISO 10426-3:2019
ICS:
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
SIST EN ISO 10426-3:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 10426-3:2019
---------------------- Page: 2 ----------------------
SIST EN ISO 10426-3:2019
EN ISO 10426-3
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2019
EUROPÄISCHE NORM
ICS 75.020; 91.100.10 Supersedes EN ISO 10426-3:2004
English Version
Petroleum and natural gas industries - Cements and
materials for well cementing - Part 3: Testing of deepwater
well cement formulations (ISO 10426-3:2019)
Industries du pétrole et du gaz naturel - Ciments et Erdöl- und Erdgasindustrie - Zemente und Materialien
matériaux pour la cimentation des puits - Partie 3: für die Zementation von Tiefbohrungen - Teil 3:
Essais de formulations de ciment pour puits en eau Prüfung von Unterwasser-Bohrlochzement (ISO
profonde (ISO 10426-3:2019) 10426-3:2019)
This European Standard was approved by CEN on 9 June 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10426-3:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 10426-3:2019
EN ISO 10426-3:2019 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 10426-3:2019
EN ISO 10426-3:2019 (E)
European foreword
This document (EN ISO 10426-3:2019) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries"
in collaboration with Technical Committee CEN/TC 12 “Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2020, and conflicting national standards shall be
withdrawn at the latest by April 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10426-3:2004.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Cz
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.