EN 3525:2007

Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa

This standard specifies the requirements relating to:
Steel FE-PL1505 (15CrMoV6)
Air melted
Hardened and tempered
Plate
6 mm < a < 20 mm
1 080 MPa < Rm<1 280 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PL1505 (15CrMoV6) - Lufterschmolzen - Gehärtet und angelassen - Platten - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa

Diese Norm legt die Anforderungen an
Stahl FE PL1505 (15CrMoV6)
Lufterschmolzen
Gehärtet und angelassen
Platten
6 mm < a ≤ 20 mm
1 080 MPa ≤ Rm ≤ 1 280 MPa
für Anwendungen in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PL1505 (15CrMoV6) - Élaboré à l'air - Trempé et revenu - Plaques - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa

Aeronavtika - Jeklo FE-PL1505 (15CrMoV6) - Taljeno - Utrjeno in mehko žarjeno - Plošča - 6 mm < a ≤ 20 mm - 1080 MPa ≤ Rm ≤ 1280 MPa

General Information

• Status: Withdrawn
• Publication Date: 20-Mar-2007
• Withdrawal Date: 19-Dec-2023
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4 - Metallic
• Ref Project: SIST EN 3525:2009 - Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa

Relations

• Replaced By: EN 3525:2023 - Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mm ≤ a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
• Effective Date: 18-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.03D49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 3525:2007SIST EN 3525:2009en,de01-maj-2009SIST EN 3525:2009SLOVENSKI
STANDARD



SIST EN 3525:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3525
March 2007 ICS 49.025.10 English Version
Aerospace series - Steel FE-PL1505 (15CrMoV6) - Air melted - Hardened and tempered - Plate - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
Série aérospatiale - Acier FE-PL1505 (15CrMoV6) - Élaboré à l'air - Trempé et revenu - Plaques - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa
Luft- und Raumfahrt - Stahl FE-PL1505 (15CrMoV6) - Lufterschmolzen - Gehärtet und angelassen - Platten - 6 mm < a ≤ 20 mm - 1 080 MPa ≤ Rm ≤ 1 280 MPa This European Standard was approved by CEN on 5 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3525:2007: ESIST EN 3525:2009



EN 3525:2007 (E) 2 Foreword This document (EN 3525:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2007, and conflicting national standards shall be withdrawn at the latest by September 2007. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 3525:2009



EN 3525:2007 (E) 3 Introduction This standard is part of the series of EN metallic m
...