EN ISO 8113:2004

Glass containers - Resistance to vertical load - Test method (ISO 8113:2004)

ISO 8113:2004 specifies a method for determination of the resistance of glass containers to external force in the direction of the vertical axis.

Behältnisse aus Glas - Axialdruckfestigkeit - Prüfverfahren (ISO 8113:2004)

Diese Europäische Norm legt ein Verfahren für die Bestimmung der Festigkeit von Behältnissen aus Glas durch äußere Kräfte in axialer Richtung fest.

Récipients en verre - Résistance à la charge verticale - Méthode d'essai (ISO 8113:2004)

L'ISO 8813:2004 spécifie une méthode de détermination de la résistance des récipients en verre à une force externe dans la direction de l'axe vertical.

Steklena embalaža – Odpornost proti navpični obremenitvi – Preskusna metoda (ISO 8113:2004)

General Information

• Status: Published
• Publication Date: 29-Feb-2004
• ICS: 55.100 - Bottles. Pots. Jars
• Technical Committee: CEN/TC 261 - Packaging
• Drafting Committee: CEN/TC 261/SC 5/WG 21 - Glass packaging
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 23-Oct-2009
• Completion Date: 23-Oct-2009
• Directive: 80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
• Directive: 87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
• Ref Project: SIST EN ISO 8113:2004 - Glass containers - Resistance to vertical load - Test method (ISO 8113:2004)

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2004
6WHNOHQDHPEDODåD±2GSRUQRVWSURWLQDYSLþQLREUHPHQLWYL±3UHVNXVQDPHWRGD
,62
Glass containers - Resistance to vertical load - Test method (ISO 8113:2004)
Behältnisse aus Glas - Axialdruckfestigkeit - Prüfverfahren (ISO 8113:2004)
Récipients en verre - Résistance a la charge verticale - Méthode d'essai (ISO
8113:2004)
Ta slovenski standard je istoveten z: EN ISO 8113:2004
ICS:
55.100 Steklenice. Lonci. Kozarci Bottles. Pots. Jars
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 8113
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2004
ICS 55.100
English version
Glass containers - Resistance to vertical load - Test method
(ISO 8113:2004)
Récipients en verre - Résistance à la charge verticale - Behältnisse aus Glas - Axialdruckfestigkeit - Prüfverfahren
Méthode d'essai (ISO 8113:2004) (ISO 8113:2004)
This European Standard was approved by CEN on 3 November 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8113:2004: E
worldwide for CEN national Members.

Contents page
Foreword.3
1 Scope .4
2 Sampling.4
3 Apparatus .4
4 Procedure .4
5 Safety requirements .5
6 Test report .5
Foreword
This document (EN ISO 8113:2004) has been prepared by Technical Committee CEN /TC 261 "Packaging", the
secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 63 "Glass containers".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by September 2004, and conflicting national standards shall be withdrawn at the
latest by September 2004.
Efficient packaging is of great importance for the distribution and the protection of goods and the environment.
Insufficient or inappropriate packaging can lead to damage or wastage ot the contents of the pack.
This standard is part of a series of standards for "Glass containers - Test methods":
 EN ISO 7458, Glass containers — Internal pressure resistance — Test methods (ISO 7458:2004)
 EN ISO 7459, Glass containers — Thermal shock resistance and thermal shock endurance — Test methods
(ISO 7459:2004)
 prEN ISO 8106, Glass containers — Determination of capacity by gravimetric method — Test method
(ISO/FDIS 8106:2003)
 EN ISO 8113, Glass containers — Resistance to vertical load — Test metho
...