FprEN ISO 19932-2

Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO/FDIS 19932-2:2019)

2020-11-20 JF: Through decision BT C215/2020, taken on 2020-11-18, CEN/BT approved the cancellation of WI.
2020-08-28 ISO CS informed about breaking Vienna Agreement
2019-05-07 JF The wrong standard was included in the request for the assessment of the formal vote standard The new request is necessery.

Pflanzenschutzgeräte - Tragbare Geräte - Teil 2: Prüfverfahren (ISO/FDIS 19932-2:2019)

Matériel de protection des cultures - Pulvérisateurs à dos - Partie 2: Méthodes d'essai (ISO/FDIS 19932-2:2019)

Oprema za zaščito poljščin - Nahrbtni škropilniki - 2. del: Preskusne metode (ISO/FDIS 19932-2:2019)

General Information

• Status: Not Published
• Publication Date: 04-Aug-2019
• ICS: 65.060.40 - Plant care equipment
• Technical Committee: CEN/TC 144 - Tractors and machinery for agriculture and forestry
• Drafting Committee: CEN/TC 144/WG 4 - Portable machines and pedestrian controlled machines
• Current Stage: 3098 - Decision to reject - Consensus building
• Completion Date: 18-Nov-2020
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: kSIST FprEN ISO 19932-2:2019 - Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO/FDIS 19932-2:2019)

Relations

• Revises: EN ISO 19932-2:2013 - Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO 19932-2:2013)
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 19932-2:2017
01-junij-2017
2SUHPD]D]DãþLWRSROMãþLQ1DKUEWQLãNURSLOQLNLGHO3UHVNXVQHPHWRGH
,62',6
Equipment for crop protection - Knapsack sprayers - Part 2: Test methods (ISO/DIS
19932-2:2017)
Pflanzenschutzgeräte - Tragbare Geräte - Teil 2: Prüfverfahren (ISO/DIS 19932-2:2017)
Matériel de protection des cultures - Pulvérisateurs à dos - Partie 2: Méthodes d'essai
(ISO/DIS 19932-2:2017)
Ta slovenski standard je istoveten z: prEN ISO 19932-2
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
oSIST prEN ISO 19932-2:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 19932-2:2017
oSIST prEN ISO 19932-2:2017
DRAFT INTERNATIONAL STANDARD
ISO/DIS 19932-2
ISO/TC 23/SC 6 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2017-03-30 2017-06-21
Equipment for crop protection — Knapsack sprayers —
Part 2:
Test methods
Matériel de protection des cultures — Pulvérisateurs à dos —
Partie 2: Méthodes d’essai
ICS: 65.060.40
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 19932-2:2017(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2017

oSIST prEN ISO 19932-2:2017
ISO/DIS 19932-2:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

oSIST prEN ISO 19932-2:2017
ISO/DIS 19932-2:2017(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Test liquids and equipment . 1
5 General . 2
5.1 Test conditions . 2
5.2 Sprayer . 2
5.3 Functional tests . 2
5.3.1 Shut-off device reliability . 2
5.3.2 Spray liquid output . 3
5.3.3 Load carrying straps and their fixation points . 3
5.3.4 Stability . 3
5.3.5 Contents gauge scale and total volume . 3
5.3.6 Filling rate . 4
5.3.7 Emptying. 4
5.3.8 Absorbency of carrying straps . 5
5.4 Leakage test . 5
5.5 Centre of gravity . 6
6 Specific tests for lever-operated knapsack sprayers . 7
6.1 Preconditioning . 7
6.2 Volume of the external surface deposit . 8
6.3 Volume of total residual liquid . 8
6.4 Drop test . 8
7 Specific tests for engine- or motor-driven knapsack sprayers . 9
7.1 Volume of external surface deposit . 9
7.2 Volume of total residual liquid . 9
8 Specific tests for compression sprayers .10
8.1 Volume test .10
8.1.1 Volume of external surface deposit.10
8.1.2 Volume of total residual liquid .10
8.2 Drop test .11
9 Test report .11
Annex A (informative) Example of a preconditioning device .12
Annex B (informative) Example of a shut-off test device .13
Annex C (informative) Example of a strap test device .14
Annex D (informative) Example of drop test device .15
Annex E (informative) Example of filling device .16
Annex F (normative) Minimum content of test report .18
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC amended by Directive 2009/127/EC
aimed to be covered .23
oSIST prEN ISO 19932-2:2017
ISO/DIS 19932-2:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 19932-2 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture
and forestry, Subcommittee SC 6, Equipment for crop protection.
This second edition cancels and replaces the first edition (ISO 19932-1:2013), which has been technically
revised.
A list of all parts in the ISO 19932- series can be found on the ISO website.
iv © ISO 2017 – All rights reserved

oSIST prEN ISO 19932-2:2017
ISO/DIS 19932-2:2017(E)
Introduction
The application of plant protection products with knapsack sprayers should take into consideration
biological, economic, environmental and operator issues.
The aim of this part of ISO 19932 is to specify test methods for the verification of requirements for
equipment to ensure safe use and protect the environment.
Implementation of parts 1 and 2 of ISO 19932 should achieve an appropriate level of operator safety and
avoid unnecessary dispersal of plant protection products into the environment.
oSIST prEN ISO 19932-2:2017
oSIST prEN ISO 19932-2:2017
DRAFT INTERNATIONAL STANDARD ISO/DIS 19932-2:2017(E)
Equipment for crop protection — Knapsack sprayers —
Part 2:
Test methods
1 Scope
This part of ISO 19932 specifies test methods for the verification of requirements of ISO/DIS 19932-1
for knapsack sprayers carried on the back or shoulder of the operator for use with plant protection
products.
It is applicable to lever-operated knapsack sprayers, knapsack compression sprayers and knapsack
sprayers driven by an engine or electric motor using hydraulic pressure atomization of the spray liquid
intended to be used primarily in agriculture, forestry and horticulture with a nominal volume of more
than 6,0 l.
It does not apply to knapsack combustion engine-driven air-blast sprayers covered by ISO 28139.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 5681:1992, Equipment for crop protection — Vocabulary
ISO/DIS 19932-1, Equipment for crop protection — Knapsack sprayers — Part 1: Safety and environmental
requirements
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 5681 and ISO/DIS 19932-1 apply.
ISO and IEC maintain terminological databases for use in standardiz
...