iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 16321-3:2022/prA1

(Amendment)

Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors - Amendment 1 (ISO 16321-3:2021/DAM 1:2025)

Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors - Amendment 1 (ISO 16321-3:2021/DAM 1:2025)

Protection des yeux et du visage à usage professionnel - Partie 3: Exigences complémentaires relatives aux protecteurs grillagés - Amendement 1 (ISO 16321-3:2021/DAM 1:2025)

Zaščita za oči in obraz za poklicno uporabo - 3. del: Dodatne zahteve za mrežne ščitnike za oči in obraz - Dopolnilo A1 (ISO 16321-3:2021/DAM 1:2025)

General Information

Status
Not Published
Publication Date
11-Oct-2026
ICS
13.340.20 - Head protective equipment
Technical Committee
CEN/TC 85 - Eye-protective equipment
Drafting Committee
CEN/TC 85 - Eye-protective equipment
Current Stage
4020 - Submission to enquiry - Enquiry
Start Date
13-Mar-2025
Completion Date
13-Mar-2025
Ref Project
SIST EN ISO 16321-3:2022/oprA1:2025 - Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors - Amendment 1 (ISO 16321-3:2021/DAM 1:2025)

Relations

Amends
EN ISO 16321-3:2022 - Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021)
Effective Date
30-Oct-2024

Buy Standard

EN ISO 16321-3:2022/oprA1:2025EN ISO 16321-3:2022/oprA1:2025
PreviousNext
Draft
EN ISO 16321-3:2022/oprA1:2025
English language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2025
Zaščita za oči in obraz za poklicno uporabo - 3. del: Dodatne zahteve za mrežne
ščitnike za oči in obraz - Dopolnilo A1 (ISO 16321-3:2021/DAM 1:2025)
Eye and face protection for occupational use - Part 3: Additional requirements for mesh
protectors - Amendment 1 (ISO 16321-3:2021/DAM 1:2025)
Protection des yeux et du visage à usage professionnel - Partie 3: Exigences
complémentaires relatives aux protecteurs grillagés - Amendement 1 (ISO 16321-
3:2021/DAM 1:2025)
Ta slovenski standard je istoveten z: EN ISO 16321-3:2022/prA1
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
Amendment
ISO 16321-3:2021/
DAM 1
ISO/TC 94/SC 6
Eye and face protection for
Secretariat: BSI
occupational use —
Voting begins on:
Part 3:
2025-03-14
Additional requirements for mesh
Voting terminates on:
protectors 2025-06-06
AMENDMENT 1
Protection des yeux et du visage à usage professionnel —
Partie 3: Exigences complémentaires relatives aux protecteurs
grillagés
AMENDEMENT 1
ICS: 13.340.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO 16321-3:2021/DAM 1:2025(en)

DRAFT
ISO 16321-3:2021/DAM 1:2025(en)
Amendment
ISO 16321-3:2021/
DAM 1
ISO/TC 94/SC 6
Eye and face protection for
Secretariat: BSI
occupational use —
Voting begins on:
Part 3:
Additional requirements for mesh
Voting terminates on:
protectors
AMENDMENT 1
Protection des yeux et du visage à usage professionnel —
Partie 3: Exigences complémentaires relatives aux protecteurs
grillagés
AMENDEMENT 1
ICS: 13.340.20
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2025
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 16321-1:2022/A1:2025(Amendment)
Eye and face protection for occupational use - Part 1: General requirements - Amendment 1 (ISO 16321-1:2021/Amd 1:2024)
SIST EN ISO 16321-1:2022/A1:2025
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12312-1:2022/A11:2024(Amendment)
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use
SIST EN ISO 12312-1:2022/A11:2025
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12311:2023(Main)
Personal protective equipment - Test methods for sunglasses and related eyewear (ISO 12311:2023)
SIST EN ISO 12311:2024

This document specifies reference's test methods for determining the properties of sunglasses given in ISO 12312 (all parts). It is applicable to all sunglasses and related eyewear.
Other test methods can be used if proven to be equivalent.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12312-1:2022(Main)
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)
SIST EN ISO 12312-1:2022

This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation.
Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used as replacement or alternative filters are given in Annex C.
This document is not applicable to:
a) eyewear for protection against radiation from artificial light sources;
b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO18527 (all parts));
c) sunglasses that have been medically prescribed for attenuating solar radiation;
d) products intended for direct observation of the sun, such as for viewing a partial or annular solar eclipse, for which ISO12312-2 applies;
e) products intended for occupational eye protection – see, for example, ISO16321 (all parts).

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18527-1:2022(Main)
Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)
SIST EN ISO 18527-1:2022

This document applies to all goggles with plano lenses, intended for eye protection against hazards including ultraviolet and visible solar radiation, rain, snow and wind, during downhill skiing, snowboarding and other similar activities.
This document applies to downhill skiing and snowboarding goggles fitted with an insert to carry prescription lenses.
It specifies requirements and testing for materials, performance, marking of goggles and information to be supplied by the manufacturer.
Information on the selection and use of downhill skiing and snowboarding goggles is given in Annex A.
This document does not apply to
a)   eye protectors for protection when operating or travelling on a motorized vehicle,
b)   eye protectors for protection against optical radiation from artificial sources, such as those used in solaria,
c)   eye protectors for direct observation of the sun, and
d)   eye protectors intended for sports with unrelated hazards and risks.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16321-3:2022(Main)
Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021)
SIST EN ISO 16321-3:2022

This document specifies additional performance and marking requirements for mesh protectors designed to provide protection for the eyes and faces of persons against mechanical hazards such as impacts from flying particles and fragments. The other applicable requirements for mesh protectors and the frames/mountings to which they are intended to be fitted are given in ISO 16321‑1.
This document also applies to mesh protectors used in educational establishments.
This document also applies to those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do‑it‑yourself".
This document is not applicable to protectors for use against liquid splash (including molten metal), hot solid risks, infrared and ultraviolet radiation. For protection against these hazards suitable additional or alternative protectors according ISO 16321‑1 will be needed.
This document does not apply to mesh protectors used in sports such as fencing.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16321-1:2022(Main)
Eye and face protection for occupational use - Part 1: General requirements (ISO 16321-1:2021)
SIST EN ISO 16321-1:2022

This document specifies general requirements for eye and face protectors. These protectors are intended to provide protection for the eyes and faces of persons against one or more common occupational hazards such as impacts from flying particles and fragments, optical radiation, dusts, splashing liquids, molten metals, heat, flame, hot solids, harmful gases, vapours and aerosols.
Additional requirements for eye and face protectors used during welding and related techniques and for mesh protectors are given in ISO 16321-2 and ISO 16321-3, respectively. ISO 16321-4 provides requirements and guidance on protectors against biological hazards1).
This document applies to:
— all plano as well as corrective and prescription lensed protectors and components;
— those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do-it-yourself";
— those eye and face protectors used in educational establishments.
This document does not apply to:
— protectors specifically intended for protection against only solar radiation and used in non- occupational environments for which the ISO 12312 series applies;
— protectors for medically prescribed applications (not occupational), e.g. eye protection for severe dry eye, tints prescribed for medical conditions;
— patient eye protectors during diagnosis or treatment (e.g. ISO/TR 22463);
— protectors for use during medical or e.g. aesthetic applications, e.g. intense light sources (ILS) for which the ISO 12609 series applies;
— protectors specifically intended for sports for which the ISO 18527 series applies;
— laser protectors;
— face protectors intended for live-working to protect against short-circuit electric arcs for which IEC 62819 applies;
— protectors intended to protect against ionizing radiation, e.g. X-rays, for which IEC 61331-3 applies.
1) In preparation.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18527-2:2021(Main)
Eye and face protection for sports use - Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021)
SIST EN ISO 18527-2:2021

This document applies to all eye protectors intended for eye protection against hazards during playing or instructing in the sports of squash, racquetball and squash 57 and sports with similar hazards and no greater risks. It applies to eye protectors that incorporate prescription lenses but has no specific tests for eye protectors designed for use over spectacles.
It specifies requirements and testing for materials, performance, marking of eye protectors and information to be supplied by the manufacturer.
Information on the selection and use of eye protectors for squash, racquetball and squash 57 is given in Annex A.
This document does not apply to
a)   sports eye protectors designed for use over prescription spectacles,
b)   eye protectors for other occupational applications,
c)   eye protectors without lenses,
d)   eye protectors for sports where the hazards are unrelated to the hazards in or involve greater risks than squash, racquetball and squash 57, and
e)   eye protectors with gradient-tinted lenses because they are not appropriate for squash, racquetball or squash 57.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16321-2:2021(Main)
Eye and face protection for occupational use - Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021)
SIST EN ISO 16321-2:2021

This document specifies additional material, design, performance and marking requirements for eye and face protectors designed to provide protection for the eyes and faces of persons against occupational hazards, such as optical radiation, impacts from flying particles and fragments, and hot solids during welding and related techniques. The other applicable requirements for welding protectors are given in ISO 16321‑1.
This document also applies to welding protectors used in educational establishments.
This document also applies to those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do-it-yourself".

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19818-1:2021(Main)
Eye and face protection - Protection against laser radiation - Part 1: Requirements and test methods (ISO 19818-1:2021)
SIST EN ISO 19818-1:2021

This document is applicable to protectors intended to provide protection against accidental exposure to laser radiation within the wavelength range 180 nm to 1 mm. It specifies the requirements, test methods and marking. Protectors intended for adjustment work on lasers are included in the scope of this document and are marked in the same way as other protectors, but selection of appropriate eyewear for a specific application is a choice of the user. Laser protective filters used as viewing windows in laser equipment machinery or incorporated into optical instruments such as operating microscopes and loupes that may be used for deliberate viewing of laser radiation as part of their function are outside the scope of this document.
Laser radiation in the wavelength range below 180 nm is absorbed in air, therefore eye and face protection should not be required.
This document is applicable to devices intended for patient protection during medical laser procedures except for treatment in the periorbital area. Guidance on eye protectors for patients (including those used for periorbital treatment) is given in ISO/TR 22463.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day