prEN ISO 25178-605
(Main)Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Design and characteristics of non-contact (point autofocus probe) instruments (ISO/DIS 25178‑605:2023)
Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Design and characteristics of non-contact (point autofocus probe) instruments (ISO/DIS 25178‑605:2023)
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Flächenhaft - Teil 605: Aufbau und Merkmale von berührungslos messenden Geräten (Punkt-Autofokus-Sensor) (ISO/DIS 25178‑605:2023)
Spécification géométrique des produits (GPS) - État de surface: Surfacique - Partie 605: Conception et caractéristiques des instruments sans contact (capteur autofocus à point) (ISO/DIS 25178‑605:2023)
Specifikacija geometrijskih veličin izdelka (GPS) - Tekstura površine: ploskovna - 605. del: Konstrukcije in značilnosti brezkontaktnih (točka avtofokusne sonde) instrumentov (ISO/DIS 25178-605:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 25178-605:2023
01-december-2023
Specifikacija geometrijskih veličin izdelka (GPS) - Tekstura površine: ploskovna -
605. del: Konstrukcije in značilnosti brezkontaktnih (točka avtofokusne sonde)
instrumentov (ISO/DIS 25178-605:2023)
Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Design and
characteristics of non-contact (point autofocus probe) instruments (ISO/DIS 25178-
605:2023)
Geometrische Produktspezifikation (GPS) - Oberflächenbeschaffenheit: Flächenhaft -
Teil 605: Aufbau und Merkmale von berührungslos messenden Geräten (Punkt-
Autofokus-Sensor) (ISO/DIS 25178-605:2023)
Spécification géométrique des produits (GPS) - État de surface: Surfacique - Partie 605:
Conception et caractéristiques des instruments sans contact (capteur autofocus à point)
(ISO/DIS 25178-605:2023)
Ta slovenski standard je istoveten z: prEN ISO 25178-605
ICS:
17.040.20 Lastnosti površin Properties of surfaces
17.040.40 Specifikacija geometrijskih Geometrical Product
veličin izdelka (GPS) Specification (GPS)
oSIST prEN ISO 25178-605:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 25178-605:2023
---------------------- Page: 2 ----------------------
oSIST prEN ISO 25178-605:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 25178-605
ISO/TC 213 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-10-23 2024-01-15
Geometrical product specifications (GPS) — Surface
texture: Areal —
Part 605:
Design and characteristics of non-contact (point autofocus
probe) instruments
ICS: 17.040.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 25178-605:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 25178-605:2023
ISO/DIS 25178-605:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 25178-605
ISO/TC 213 Secretariat: BSI
Voting begins on: Voting terminates on:
Geometrical product specifications (GPS) — Surface
texture: Areal —
Part 605:
Design and characteristics of non-contact (point autofocus
probe) instruments
ICS: 17.040.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 25178-605:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 25178-605:2023
ISO/DIS 25178-605:2023(E)
Contents Page
Foreword .iv
Introduction .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.