EN 480-2:2006

Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time

This European Standard describes a method for determining setting time of mortar with and without admixtures. It is an adaptation of the setting time test described in EN 196 3.
This European Standard describes the reference method; it allows the use of alternative apparatus as indicated in notes provided that they do not affect the results

Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 2: Bestimmung der Erstarrungszeit

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Erstarrungszeit für Mörtel mit und ohne Zusatzmittel fest. Sie ist eine Anpassung an die in EN 196-3 beschriebene Prüfung der Erstarrungszeit.
Diese Norm beschreibt das Referenzverfahren; die Norm lässt die Verwendung alternativer Prüfeinrichtungen, die jeweils in den Anmerkungen angegeben sind, zu, sofern diese die Prüfergebnisse nicht beeinflussen.

Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 2: Détermination du temps de prise

Kemijski dodatki za beton, malto in injekcijsko maso - Preskusne metode - 2. del: Ugotavljanje časa vezanja

General Information

• Status: Published
• Publication Date: 22-Aug-2006
• Withdrawal Date: 27-Feb-2007
• ICS: 91.100.30 - Concrete and concrete products
• Technical Committee: CEN/TC 104 - Concrete ( performance, production, placing and compliance criteria )
• Drafting Committee: CEN/TC 104/SC 3 - Admixtures for concrete
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 30-Jun-2023
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/128 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on products for concrete, mortar and grout
• Ref Project: SIST EN 480-2:2006 - Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time

Relations

• Replaces: EN 480-2:1996 - Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of setting time
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 480-2:2006
01-december-2006
1DGRPHãþD
SIST EN 480-2:1998
.HPLMVNLGRGDWNL]DEHWRQPDOWRLQLQMHNFLMVNRPDVR3UHVNXVQHPHWRGHGHO
8JRWDYOMDQMHþDVDYH]DQMD
Admixtures for concrete, mortar and grout - Test methods - Part 2: Determination of
setting time
Zusatzmittel für Beton, Mörtel und Einpressmörtel - Prüfverfahren - Teil 2: Bestimmung
der Erstarrungszeit
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Partie 2: Détermination du
temps de prise
Ta slovenski standard je istoveten z: EN 480-2:2006
ICS:
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 480-2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 480-2

NORME EUROPÉENNE

EUROPÄISCHE NORM
August 2006
ICS 91.100.30 Supersedes EN 480-2:1996
English Version
Admixtures for concrete, mortar and grout - Test methods - Part
2: Determination of setting time
Adjuvants pour béton, mortier et coulis - Méthodes d'essai - Zusatzmittel für Beton, Mörtel und Einpressmörtel -
Partie 2: Détermination du temps de prise Prüfverfahren - Teil 2: Bestimmung der Erstarrungszeit
This European Standard was approved by CEN on 19 June 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 480-2:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 480-2:2006 (E)
Contents Page
Foreword.3
1 Scope .5
2 Normative references .5
3 Test principle.5
4 General requirements for testing.5
4.1 Laboratory .5
4.2 Apparatus .5
4.3 Materials .6
5 Setting time test.6
5.1 Apparatus .6
5.2 Preparation of the mortar.8
5.3 Filling the mould .8
5.4 Test procedure.8
5.4.1 Determination of initial setting time.8
5.4.
...