prEN ISO 10855-3
(Main)Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO/DIS 10855-3:2024)
Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO/DIS 10855-3:2024)
This document specifies requirements for the periodic inspection, examination and testing of offshore freight and service containers, built in accordance with ISO 10855‑1, with maximum a gross mass not exceeding 25 000 kg and their associated lifting sets, intended for repeated use to, from and between offshore installations and ships. Inspection requirements following damage and repair of offshore containers are also included.
Recommended knowledge and experience of staff responsible for inspection of offshore containers is given in Annex B.
Recommended knowledge and experience of staff responsible for inspection of lifting sets intended for use with offshore containers is given in Annex C.
Offshore-Container und dazugehörige Anschlaggarnituren - Teil 3: Wiederkehrende Kontrolle, Inspektion und Prüfung (ISO/DIS 10855‑3:2024)
Containeurs offshore et dispositifs de levage associés - Partie 3: Contrôle périodique, inspection et essais (ISO/DIS 10855-3:2024)
Le présent document spécifie les exigences relatives au contrôle périodique, à l'inspection et aux essais des conteneurs de marchandises et de service, construits conformément à l'ISO 10855‑1, ayant une masse brute maximale inférieure ou égale à 25 000 kg et leurs dispositifs de levage associés, destinés à un usage répété à destination, en provenance ou entre des installations en mer et des navires. Les exigences relatives à l'inspection après des dommages et une réparation des conteneurs offshore sont également incluses.
Les connaissances et l'expérience recommandées du personnel en charge de l'inspection des conteneurs offshore sont indiquées à l'Annexe B.
Les connaissances et l'expérience recommandées du personnel en charge de l'inspection des dispositifs de levage sont indiquées à l'Annexe C.
Plavajoče kontejnerske enote in z njimi povezan dvižni pribor - 3. del: Periodični nadzor, pregled in preskušanje (ISO/DIS 10855-3:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 10855-3:2024
01-april-2024
Plavajoče kontejnerske enote in z njimi povezan dvižni pribor - 3. del: Periodični
nadzor, pregled in preskušanje (ISO/DIS 10855-3:2024)
Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination
and testing (ISO/DIS 10855-3:2024)
Offshore-Container und dazugehörige Anschlaggarnituren - Teil 3: Wiederkehrende
Kontrolle, Inspektion und Prüfung (ISO/DIS 10855-3:2024)
Containeurs offshore et dispositifs de levage associés - Partie 3: Contrôle périodique,
inspection et essais (ISO/DIS 10855-3:2024)
Ta slovenski standard je istoveten z: prEN ISO 10855-3
ICS:
53.020.99 Druga dvigalna oprema Other lifting equipment
55.180.10 Večnamenski kontejnerji General purpose containers
75.180.10 Oprema za raziskovanje, Exploratory, drilling and
vrtanje in odkopavanje extraction equipment
oSIST prEN ISO 10855-3:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 10855-3:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 10855-3:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10855-3
ISO/TC 67/SC 7 Secretariat: BSI
Voting begins on: Voting terminates on:
2024-01-31 2024-04-24
Offshore containers and associated lifting sets —
Part 3:
Periodic inspection, examination and testing
Containeurs offshore et dispositifs de levage associés —
Partie 3: Contrôle périodique, inspection et essais
ICS: 75.180.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 10855-3:2024(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2024
---------------------- Page: 3 ----------------------
oSIST prEN ISO 10855-3:2024
ISO/DIS 10855-3:2024(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 10855-3
ISO/TC 67/SC 7 Secretariat: BSI
Voting begins on: Voting terminates on:
Offshore containers and associated lifting sets —
Part 3:
Periodic inspection, examination and testing
Containeurs offshore et dispositifs de levage associés —
Partie 3: Contrôle périodique, inspection et essais
ICS: 75.180.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2024
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 10855-3:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2024 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 10855-3:2024
ISO/DIS 10855-3:2023(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.