Chemicals used for treatment of water intended for human consumption - Tripotassium orthophosphate

This document is applicable to tripotassium orthophosphate used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements and the corresponding test methods for tripotassium orthophosphate. It gives information on its use in water treatment. It also determines the rules relating to safe handling and use (see annex B).

Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Trikaliumphosphat

Dieses Dokument gilt für Trikaliumphosphat zur Aufbereitung von Wasser für den menschlichen Gebrauch. Es
beschreibt die Eigenschaften von Trikaliumphosphat und legt die Anforderungen sowie die entsprechenden
Prüfverfahren für Trikaliumphosphat fest. Es gibt Informationen für die Anwendung von Trikaliumphosphat in
der Wasseraufbereitung. Es legt darüber hinaus Regeln für die sichere Handhabung und Benutzung fest
(siehe Anhang B).

Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Phosphate tripotassique

Le présent document est applicable au phosphate tripotassique utilisé pour le traitement de l�eau destinée à la
consommation humaine. Il décrit les caractéristiques et spécifie les exigences et les méthodes d�essai
correspondantes pour le phosphate tripotassique. Il donne des informations pour son emploi dans le
traitement de l�eau. Il fixe également les règles relatives à la sécurité d�emploi et de manipulation (voir
Annexe B).

Kemikalije, ki se uporabljajo za pripravo pitne vode – Trikalijev fosfat

General Information

Status
Published
Publication Date
15-Mar-2005
Current Stage
9020 - Submission to 2 Year Review Enquiry - Review Enquiry
Start Date
15-Jul-2024
Completion Date
15-Jul-2024

Relations

Buy Standard

Standard
EN 1203:2005
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kemikalije, ki se uporabljajo za pripravo pitne vode – Trikalijev fosfatProdukte zur Aufbereitung von Wasser für den menschlichen Gebrauch - TrikaliumphosphatProduits chimiques utilisés pour le traitement de l'eau destinée a la consommation humaine - Phosphate tripotassiqueChemicals used for treatment of water intended for human consumption - Tripotassium orthophosphate71.100.80Chemicals for purification of water13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 1203:2005SIST EN 1203:2005en01-julij-2005SIST EN 1203:2005SLOVENSKI
STANDARDSIST EN 1203:19991DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1203
March 2005 ICS 71.100.80 Supersedes EN 1203:1997 English version
Chemicals used for treatment of water intended for human consumption - Tripotassium orthophosphate
Produits chimiques utilisés pour le traitement de l'eau destinée à la consommation humaine - Phosphate tripotassique
Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Trikaliumphosphat This European Standard was approved by CEN on 3 February 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1203:2005: ESIST EN 1203:2005

General information on tripotassium orthophosphate.15 Annex B (normative)
General rules relating to safety.16 Bibliography.17
EN 26595 by EN ISO 11969; c) introduction of annex B. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 1203:2005

- Determination of arsenic- Atomic absorption spectrometric method (hydride technique) (ISO 11969:1996). ISO 2997, Phosphoric acid for industrial use – Determination of sulfate content – Method by reduction and titrimetry. ISO 3165, Sampling of chemical products for industrial use – Safety in sampling. ISO 3360, Phosphoric acid and sodium phosphates for industrial use (including foodstuffs) - Determination of fluorine content – Alizarin complexone and lanthanum nitrate photometric method. ISO 6206, Chemical products for industrial use – Sampling – Vocabulary. ISO 6703-1, Water quality – Determination of cyanide – Part 1 : Determination of total cyanide. ISO 8213, Chemical products for industrial use – Sampling techniques – Solid chemical products in the form of particles varying from powders to coarse lumps. ISO 8288, Water quality – Determination of cobalt, nickel, copper, zinc, cadmium and lead – Flame atomic absorption spectrometric methods. ISO 9174, Water quality – Determination of chromium – Atomic absorption spectrometric methods. ISO 9965, Water quality – Determination of selenium – Atomic absorption spectrometric method (hydride technique).
1) Chemical Abstracts Service Registry Number. 2) European Inventory of Existing Commercial Chemical Substances. SIST EN 1203:2005

1 %
is approximately 12.
3) 100 kPa = 1 bar. SIST EN 1203:2005

Limit
mg/kg of dry product Sulfate (SO42-) max.500 Fluoride (F-) max.10 4.4 Chemical parameters Content of various chemical parameters depends on the origin of the raw materials, most of these elements are present only as traces. The product shall conform to the requirements specified in Table 2. SIST EN 1203:2005

Limit
mg/kg of dry product Antimony (Sb) max. 3 Arsenic (As) max. 3 Cadmium (Cd) max. 3 Chromium (Cr) max. 10 Cyanide (CN) max. 5 Lead (Pb) max. 10 Mercury (Hg) max. 1 Nickel (Ni) max. 10 Selenium (Se) max. 3 NOTE Pesticides and polycyclic aromatic hydrocarbons are not relevant in tripotassium orthophosphate. For parametric values of tripotassium orthophosphate on trace metal content in drinking water, see [1]. 5 Test methods 5.1 Sampling 5.1.1 General Observe the recommendations of ISO 3165 and take account of ISO 6206. 5.1.2 Solid Prepare the laboratory sample(s) required by the relevant procedure described in ISO 8213. 5.1.3 Liquid 5.1.3.1 Sampling from drums and bottles 5.1.3.1.1 General 5.1.3.1.1.1 Mix the contents of each container to be sampled by shaking the container, by rolling it or by rocking it from side to side, taking care not to damage the container or spill any of the liquid. 5.1.3.1.1.2 If the design of the container is such (for example, a narrow-necked bottle) that it is impracticable to use a sampling implement, take a sample by pouring after the contents have been thoroughly mixed. Otherwise, proceed as described in 5.1.3.1.1.3. 5.1.3.1.1.3 Examine the surface of the liquid. If there are signs of surface contamination, take samples from the surface as described in 5.1.3.1.2. Otherwise, take samples as described in 5.1.3.1.3. 5.1.3.1.2 Surface sampling Take a sample using a suitable ladle. Lower the ladle into the liquid until the rim is just below the surface, so that the surface layer runs into it. Withdraw the ladle just before it fills completely and allow any liquid adhering to the SIST EN 1203:2005
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.