EN ISO 5404:2002

Leather - Physical and mechanical tests - Determination of the water resistance of heavy leathers (ISO 5404:2002)

ISO 5404:2002 specifies a method for determining the water resistance of heavy leathers. The method allows determination of the penetration time, water absorption, area of penetration and water penetration rate as required. It is applicable to all types of heavy leathers.

Leder - Physikalische und mechanische Prüfungen - Bestimmung der Wasserdichtigkeit von schwerem Leder (ISO 5404:2002)

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Wasserdichtigkeit von schwerem Leder fest. Das Verfahren erlaubt bei Bedarf die Bestimmung der Durchdringungszeit, der Wasseraufnahme, der durchdrungenen Fläche und der Wasserdurchdringungsrate. Es ist für alle Arten von schwerem Leder anwendbar.

Cuir - Essais physiques et mécaniques - Détermination de la résistance à l'eau des cuirs épais (ISO 5404:2002)

L'ISO 5404:2002 spécifie une méthode de détermination de la résistance à l'eau des cuirs épais. La méthode permet de déterminer le temps de pénétration, l'absorption d'eau, la surface et le taux de pénétration de l'eau requis. Elle est applicable à tous les types de cuirs épais.

Usnje - Fizikalni in mehanski preskusi - Ugotavljanje odpornosti težkega usnja proti vodi (ISO 5404:2002)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2002
• Withdrawal Date: 14-Dec-2011
• ICS: 59.140.30 - Leather and furs
• Technical Committee: CEN/TC 289 - Leather
• Drafting Committee: CEN/TC 289/WG 2 - Physical test methods
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2011
• Completion Date: 15-Dec-2011
• Ref Project: SIST EN ISO 5404:2003 - Leather - Physical and mechanical tests - Determination of the water resistance of heavy leathers (ISO 5404:2002)

Relations

• Replaced By: EN ISO 5404:2011 - Leather - Physical test methods - Determination of water resistance of heavy leathers (ISO 5404:2011)
• Effective Date: 21-Dec-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Usnje - Fizikalni in mehanski preskusi - Ugotavljanje odpornosti težkega usnja proti vodi (ISO 5404:2002)Leder - Physikalische und mechanische Prüfungen - Bestimmung der Wasserdichtigkeit von schwerem Leder (ISO 5404:2002)Cuir - Essais physiques et mécaniques - Détermination de la résistance a l'eau des cuirs épais (ISO 5404:2002)Leather - Physical and mechanical tests - Determination of the water resistance of heavy leathers (ISO 5404:2002)59.140.30Usnje in krznoLeather and fursICS:Ta slovenski standard je istoveten z:EN ISO 5404:2002SIST EN ISO 5404:2003en01-februar-2003SIST EN ISO 5404:2003SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 5404December 2002ICS 59.140.30English versionLeather - Physical and mechanical tests - Determination of thewater resistance of heavy leathers (ISO 5404:2002)Cuir - Essais physiques et mécaniques - Détermination dela résistance à l'eau des cuirs épais (ISO 5404:2002)Leder - Physikalische und mechanische Prüfungen -Bestimmung der Wasserdichtigkeit von schwerem Leder(ISO 5404:2002)This European Standard was approved by CEN on 8 June 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 5404:2002 ESIST EN ISO 5404:2003

2003-09-24ForewordThis document (EN ISO 5404:2002) has been prepared by Technical Committee CEN/TC 289"Leather", the secretariat of which is held by UNI, in collaboration with the International Union ofLeather Technologists and Chemists Societies (IULTCS).It is based on Method IUP 11 of the International Union of Leather Technologists and ChemistsSocieties.This European Standard shall be given the status of a national standard, either by publication ofan identical text or by endorsement, at the latest by June 2003, and conflicting nationalstandards shall be withdrawn at the latest by June 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations ofthe following countries are bound to implement this European Standard: Austria, Belgium, CzechRepublic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.Endorsement noticeThe text of ISO 5404:2002 has been approved by CEN as EN ISO 5404:2002 without anymodifications.NOTE
Normative references to International Standards are listed in Annex ZA (normative).SIST EN ISO 5404:2003

Reference numberISO 5404:2002(E)IULTCS/IUP 11© ISO 2002
INTERNATIONAL STANDARD ISO5404IULTCS/IUP11First edition2002-12-15 Leather — Physical and mechanical tests — Determination of the water resistance of heavy leathers Cuir — Essais physiques et mécaniques — Détermination de la résistance à l’eau des cuirs épais
ISO 5404:2002(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2002 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
[e-mail] Web
www.iso.org Published in Switzerland
ii © ISO 2002 – All rights reserved
ISO 5404:2002(E) © ISO 2002 – All rights reserved iii Contents Page Foreword. iv1Scope.12Normative references.13Terms and definitions.14Principle.15Apparatus.16Sampling and sample preparation.37Procedure.38Expression of results.59Test report.5Annex A (informative).7SIST EN ISO 5404:2003

ISO 5404:2002(E) iv © ISO 2002 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. ISO 5404 was prepared by the Physical Test Commission of the International Union of Leather Technologists and Chemists Societies (IUP Commission, IULTCS) in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 289, Leather, the secretariat of which is held by UNI, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement). It is based on IUP 11 originally published in J. Soc. Leather Trades Chemists 44, p. 495, (1960) and declared an official method of IULTCS in 1963. This updated version was published in J. Soc. Leather Tech. Chem. 84, p. 339, (2000) and reconfirmed as an official method in March 2001. The same principle is used but the text has been updated and includes the number of test pieces to be taken.
INTERNATIONAL STANDARD ISO 5404:2002(E) © ISO 2002 – All rights reserved 1 Leather — Physical and mechanical tests — Determination of the water resistance of heavy leathers
1 ScopeThis International Standard specifies a method for determining the water resistance of heavy leathers. The methodallows determination of the penetration time, water absorption, area of penetration and water penetration rate asrequired. It is applicable to all types of heavy leathers.2 Normative referencesISO 2418Leather - Chemical, physical and mechanical and fastness tests - Samp
...