Aerospace series - Steel X2CrNi18-9 (1.4307) - Softened - 450 MPa ≤ Rm ≤ 680 MPa - Bars for machining - 4 mm ≤ De ≤ 100 mm

This document specifies the requirements relating to:
Steel X2CrNi18-9 (1.4307)
Softened
450 MPa ≤ Rm ≤ 680 MPa
Bars for machining
4 mm ≤ De ≤ 100 mm
for aerospace applications.

Luft- und Raumfahrt - Stahl X2CrNi18-9 (1.4307) - Weichgeglüht - 450 MPa ≤ Rm ≤ 680 MPa - Stangen zur spanenden Bearbeitung - 4 mm ≤ De ≤ 100 mm

Série aérospatiale - Acier X2CrNi18-9 (1.4307) - Adouci - 450 MPa ≤ Rm ≤ 680 MPa - Barres pour usinage - 4 mm ≤ De ≤ 100 mm

Le présent document spécifie les exigences relatives à :
Acier X2CrNi18-9 (1.4307)
Adouci
450 MPa ≤ Rm ≤ 680 MPa
Barres pour usinage
4 mm ≤ De ≤ 100 mm
pour applications aérospatiales.

Aeronavtika - Jeklo X2CrNi18-9 (1.4307) - Popuščano - 450 MPa ≤ Rm ≤ 680 MPa - Palice za obdelavo - 4 mm ≤ De ≤ 100 mm

Ta dokument določa zahteve, ki se navezujejo na: palice za obdelavo – 4 mm ≤ De ≤ 100 mm iz jekla X2CrNi18-9 (1.4307), popuščano – 450 MPa ≤ Rm ≤ 680 MPa.

General Information

Status
Published
Publication Date
03-Sep-2019
Withdrawal Date
30-Mar-2020
Technical Committee
Drafting Committee
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
04-Sep-2019
Completion Date
04-Sep-2019

Relations

Buy Standard

Standard
EN 2465:2019
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 2465:2019
01-november-2019
Nadomešča:
SIST EN 2465:2008
Aeronavtika - Jeklo X2CrNi18-9 (1.4307) - Popuščano - 450 MPa ≤ Rm ≤ 680 MPa -
Palice za obdelavo - 4 mm ≤ De ≤ 100 mm
Aerospace series - Steel X2CrNi18-9 (1.4307) - Softened - 450 MPa ≤ Rm ≤ 680 MPa -
Bar for machining - 4 mm ≤ De ≤ 100 mm
Luft- und Raumfahrt - Stahl X2CrNi18-9 (1.4307) - Weichgeglüht - 450 MPa ≤ Rm ≤ 680
MPa - Stangen zur spanenden Bearbeitung - 4 mm ≤ De ≤ 100 mm
Série aérospatiale - Acier X2CrNi18-9 (1.4307) - Adouci - 450 MPa ≤ Rm ≤ 680 MPa -
Barres pour usinage - 4 mm ≤ De ≤ 100 mm
Ta slovenski standard je istoveten z: EN 2465:2019
ICS:
49.025.10 Jekla Steels
SIST EN 2465:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 2465:2019

---------------------- Page: 2 ----------------------
SIST EN 2465:2019


EN 2465
EUROPEAN STANDARD

NORME EUROPÉENNE

September 2019
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 2465:2007
English Version

Aerospace series - Steel X2CrNi18-9 (1.4307) - Softened -
450 MPa ≤ Rm ≤ 680 MPa - Bars for machining - 4 mm ≤
De ≤ 100 mm
Série aérospatiale - Acier X2CrNi18-9 (1.4307) - Luft- und Raumfahrt - Stahl X2CrNi18-9 (1.4307) -
Adouci - 450 MPa ≤ Rm ≤ 680 MPa - Barres pour Weichgeglüht - 450 MPa ≤ Rm ≤ 680 MPa - Stangen zur
usinage - 4 mm ≤ De ≤ 100 mm spanenden Bearbeitung - 4 mm ≤ De ≤ 100 mm
This European Standard was approved by CEN on 12 May 2019.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 2465:2019 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 2465:2019
EN 2465:2019 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5

2

---------------------- Page: 4 ----------------------
SIST EN 2465:2019
EN 2465:2019 (E)
European foreword
This document (EN 2465:2019) has been prepared by the Aerospace and Defence Industries Association
of Europe - Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2020, and conflicting national standards shall be
withdrawn at the latest by March 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be h
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.