iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 459-3:2015

(Main)

Building lime - Part 3: Conformity evaluation

Building lime - Part 3: Conformity evaluation

This European Standard specifies the scheme for the attestation and verification of constancy of performance (AVCP) of building limes to their corresponding product standard EN 459 1. It provides rules for surveillance, assessment and evaluation of the factory production control and rules for the frequency of inspections.
The European Standard specifies technical rules for factory production control by the manufacturer, including autocontrol testing of samples. It also provides rules for actions to be followed in the event of non-conformity and requirements for dispatching centres.

Baukalk - Teil 3: Konformitätsbewertung

Diese Europäische Norm legt das Verfahren für die Bewertung und Überprüfung der Leistungsbeständigkeit (AVCP) (en: assessment and verification of constancy of performance) von Baukalk nach der entsprechenden Produktnorm EN 459-1 fest. Sie enthält Regeln zur Überwachung, Bewertung und Evaluierung der werkseigenen Produktionskontrolle sowie Regeln zur Häufigkeit der Überprüfungen.
Diese Europäische Norm legt technische Regeln für die werkseigene Produktionskontrolle durch den Hersteller einschließlich der internen Überwachungsprüfungen von Proben fest. Sie enthält darüber hinaus Regeln für Maßnahmen, die bei Nichtkonformität zu ergreifen sind, sowie Anforderungen an Auslieferungsstellen.

Chaux de construction - Partie 3 : Évaluation de la conformité

La présente Norme européenne spécifie le système d’évaluation et de vérification de la constance des performances (EVCP) des chaux de construction à la norme produit lui correspondant, l’EN 459-1. Elle fournit les règles pour la surveillance, l’évaluation et l’acceptation du contrôle de la production en usine ainsi que les règles pour la fréquence des inspections.
La présente Norme européenne fournit les règles techniques régissant le contrôle de la production en usine effectué par le fabricant, incluant les essais d’autocontrôle sur échantillons. Elle fournit également les règles pour les actions à entreprendre en cas de non-conformité, et les exigences applicables aux centres de distribution.

Gradbeno apno - 3. del: Ovrednotenje skladnosti

General Information

Status
Published
Publication Date
28-Apr-2015
Withdrawal Date
30-Oct-2015
ICS
91.100.10 - Cement. Gypsum. Lime. Mortar
Technical Committee
CEN/TC 51 - Cement and building limes
Drafting Committee
CEN/TC 51/WG 11 - Building lime
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
09-Dec-2020
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Mandate
M/414 - M/414 standardisation mandate addressed to CEN for revision of methods of analysis to detect the release of nickel from products intended to come into direct and prolonged contact with the skin (revision of the standard method EN 1811:1998).
Ref Project
SIST EN 459-3:2015 - Building lime - Part 3: Conformity evaluation

Relations

Replaces
EN 459-3:2011 - Building lime - Part 3: Conformity evaluation
Effective Date
26-Mar-2014

Buy Standard

EN 459-3:2015EN 459-3:2015
PreviousNext
Standard
EN 459-3:2015
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gradbeno apno - 3. del: Ovrednotenje skladnostiBaukalk - Teil 3: KonformitätsbewertungChaux de construction - Partie 3 : Évaluation de la conformitéBuilding lime - Part 3: Conformity evaluation91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. MortarICS:Ta slovenski standard je istoveten z:EN 459-3:2015SIST EN 459-3:2015en,fr,de01-julij-2015SIST EN 459-3:2015SLOVENSKI
STANDARDSIST EN 459-3:20111DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 459-3
April 2015 ICS 91.100.10 Supersedes EN 459-3:2011English Version
Building lime - Part 3: Conformity evaluation
Chaux de construction - Partie 3 : Évaluation de la conformité
Baukalk - Teil 3: Konformitätsbewertung This European Standard was approved by CEN on 15 February 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 459-3:2015 ESIST EN 459-3:2015
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
CEN/TR 13933:2023(Main)
Masonry cement - Testing for workability (cohesivity)
SIST-TP CEN/TR 13933:2024

This document deals with the adaption of existing test methods and equipment to provide a repeatable and reproducible means of assessing the workability ("cohesivity") imparted to mortar by masonry cements.

  • Technical report
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 197-6:2023(Main)
Cement - Part 6: Cement with recycled building materials
SIST EN 197-6:2023

This document specifies cement with recycled concrete fines whose intended use is the preparation of concrete, mortar, grout, etc.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16908:2017+A1:2022(Main)
Cement and building lime - Environmental product declarations - Product category rules complementary to EN 15804
SIST EN 16908:2017+A1:2022

The general scope of the core product category rules (PCR) is given in EN 15804:2012+A2:2019, Clause 1.
This PCR is primarily intended for the creation of cradle-to-gate EPDs of cement and building lime.
In other respects, the scope is as in EN 15804:2012+A2:2019.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 459-2:2021(Main)
Building lime - Part 2: Test methods
SIST EN 459-2:2021

This document specifies the test methods for all building limes covered by EN 459 1. They can also be applied to other lime materials, the standards for which call up these methods.
This document specifies in Table 2 the methods used for the chemical analyses and the determination of physical properties of building limes.
This document specifies the reference methods and, in certain cases, an alternative method which can be considered to be equivalent. In the case of a dispute, only the reference methods are used.
Any other methods may be used provided they are calibrated, either against the reference methods or against internationally accepted reference materials, in order to demonstrate their equivalence.

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 197-5:2021(Main)
Cement - Part 5: Portland-composite cement CEM II/C-M and Composite cement CEM VI
SIST EN 197-5:2021

This document deals with Portland-composite cement CEM II/C-M, not covered by EN 197-1, and a different type of Composite cement CEM VI, also not covered by EN 197-1, whose intended use is the preparation of concrete, mortar, grout etc.
This document does not cover:
- common cement covered by EN 197-1;
- very low heat special cement covered by EN 14216;
- supersulfated cement covered by EN 15743;
- calcium aluminate cement covered by EN 14647;
- masonry cement covered by EN 413-1.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 197-2:2020(Main)
Cement - Part 2: Assessment and verification of constancy of performance
SIST EN 197-2:2020

This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements, including certification of constancy of performance.
The document provides technical rules for factory production control, further testing of samples taken at the manufacturing plant (autocontrol testing) and assessment of the performance of the cement, initial inspection of the manufacturing plant and of factory production control, continuing surveillance, assessment and evaluation of factory production control and audit-testing of samples. It also provides rules for actions to be followed in the event of non-conformity and requirements for depots.
In this document, the word "cement" is used to refer both to common cements as defined in EN 197 1 and to other cements and binders for which the relevant product specification standard makes reference to this document and which are submitted for certification. Such a cement is produced at a given factory and belongs to a particular type and a particular strength class, as defined and specified in the relevant product specification standard.
The guidelines given in the Technical Report CEN/TR 14245 [1] contain information for the application of this document.
This document is linked with the Annexes ZA of European Standards covering cements and binders, i.e. EN 197 1, EN 14216, EN 14647, EN 413 1 and EN 15743.
NOTE   The reason for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 14245:2020(Main)
Cement - Guidelines for the application of EN 197-2: Assessment and verification of constancy of performance
SIST-TP CEN/TR 14245:2020

This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements, including certification of constancy of performance.
The document provides technical rules for factory production control, further testing of samples taken at the manufacturing plant (autocontrol testing) and assessment of the performance of the cement, initial inspection of the manufacturing plant and of factory production control, continuing surveillance, assessment and evaluation of factory production control and audit-testing of samples. It also provides rules for actions to be followed in the event of non-conformity and requirements for depots.
In this document, the word “cement” is used to refer both to common cements as defined in EN 197 1 and to other cements and binders for which the relevant product specification standard makes reference to this document and which are submitted for certification. Such a cement is produced at a given factory and belongs to a particular type and a particular strength class, as defined and specified in the relevant product specification standard.
The guidelines given in the Technical Report CEN/TR 14245 contain information for the application of this document.
This document is linked with Annexes ZA of European Standards covering cements and binders, i.e. EN 197 1, EN 14216, EN 14647, EN 413 1 and EN 15743.
NOTE   The reason for having drafted this separate document is that the provisions it includes are applicable to different products covered by different European Standards.
Guidance
EN 197 2 deals with the assessment and verification of constancy of performance (AVCP) of cements and binders that are submitted for certification. It deals in particular with cases where “further testing” of the product is undertaken, as is the case for attestation system 1+ under the Construction Products Regulation. The products for which EN 197 2 is applicable are: the common cement products and the low heat cements and the sulfate resisting cements, refer to EN 197 1, the very low heat special cements, refer to EN 14216, the supersulfated cements, refer to EN 15743, the calcium aluminate cements, refer to EN 14647, and the masonry cements, refer to EN 413 1.

  • Technical report
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17365:2019(Main)
Method for the determination of C3A in the clinker from cement analysis
SIST-TP CEN/TR 17365:2019

This document describes the analytical procedures used to determine the content of C3A in the clinker starting from a chemical analysis on cement. The method can be applied to CEM type I and IV for the determination of the requirement of C3A, as defined on EN 197 1.
This document describes two methods, traditional wet and XRF analysis (EN 196 2), which can be considered to be equivalent, in the scope of this CEN/TR 17365, for the determination of Al2O3, Fe2O3 and SO3.
The same methods are described in EN 196 2, but for the scope of this document, the X-ray fluorescence (XRF) is the preferred method to be used for the determination of Al2O3, Fe2O3 and SO3.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 196-11:2018(Main)
Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method
SIST EN 196-11:2019

This document specifies the apparatus and procedure for determining the heat of hydration of cements and other hydraulic binders at different test ages by isothermal conduction calorimetry.
This test procedure is intended for measuring the heat of hydration of cement up to 7 days in order to obtain correspondence between Isothermal Conduction Calorimetry (ICC) and EN 196 8 and EN 196 9. Nevertheless this test duration may be critical for some apparatus, even if they can work properly at shorter test ages.
Contrary to EN 196 8 this method gives the heat of hydration continuously over the time. Additionally, the heat flow versus time is given.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 196-6:2018(Main)
Methods of testing cement - Part 6: Determination of fineness
SIST EN 196-6:2019

This European Standard describes three methods of determining the fineness of cement.
The sieving method serves only to demonstrate the presence of coarse cement particles. This method is primarily suited to checking and controlling the production process.
The air-jet sieving method measures the retention on sieving and is suitable for particles which substantially pass a 2,0 mm test sieve. It may be used to determine the particle size distribution of agglomerates of very fine particles. This method may be used with test sieves in a range of aperture sizes, e.g. 63 μm and 90 μm.
The air permeability method (Blaine) measures the specific surface area (mass related surface area) by comparison with a reference material sample. The determination of the specific surface area serves primarily to check the consistency of the grinding process of one and the same plant. This method only enables a limited assessment of the properties of the cement in use.
NOTE   The air permeability method may not give significant results for cements containing ultrafine materials.
The methods are applicable to all the cements defined in EN 197.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day