EN 1366-7:2004

Fire resistance tests for service installations - Part 7: Conveyor systems and their closures

This part of EN 1634 specifies a method for determining the fire resistance of conveyor systems shutter (CSS) assemblies designed for installation within openings incorporated in vertical and/or horizontal separating elements, including the necessary sealing measures, if the conveyor systems shutters (CSS) are penetrated by parts of the conveyor tracks, by electrical cables or by pneumatic pipes.

Feuerwiderstandsprüfungen für Installationen - Teil 7: Förderanlagen und ihre Abschlüsse

Essais de résistance au feu des installations techniques - Partie 7: Fermetures de passages pour convoyeurs et bandes transporteuses

Preskusi požarne odpornosti servisnih inštalacij – 7. del: Sistemi tekočih trakov in njihove zapore

General Information

• Status: Published
• Publication Date: 29-Jun-2004
• Withdrawal Date: 30-Dec-2004
• ICS: 13.220.50 - Fire-resistance of building materials and elements
• Technical Committee: CEN/TC 127 - Fire safety in buildings
• Drafting Committee: CEN/TC 127 - Fire safety in buildings
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 03-Jun-2024
• Completion Date: 03-Jun-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/EXP - Expected mandates in CPD field.
• Ref Project: SIST EN 1366-7:2004 - Fire resistance tests for service installations - Part 7: Conveyor systems and their closures

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Feuerwiderstandsprüfungen für Installationen - Teil 7: Förderanlagen und ihre AbschlüsseEssais de résistance au feu des installations techniques - Partie 7: Fermetures de passages pour convoyeurs et bandes transporteusesFire resistance tests for service installations - Part 7: Conveyor systems and their closures13.220.50Požarna odpornost gradbenih materialov in elementovFire-resistance of building materials and elementsICS:Ta slovenski standard je istoveten z:EN 1366-7:2004SIST EN 1366-7:2004en,fr,de01-oktober-2004SIST EN 1366-7:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1366-7June 2004ICS 13.220.50English versionFire resistance tests for service installations - Part 7: Conveyorsystems and their closuresEssais de résistance au feu des installations techniques -Partie 7: Fermetures de passages pour convoyeurs etbandes transporteusesFeuerwiderstandsprüfungen für Installationen - Teil 7:Förderanlagen und ihre AbschlüsseThis European Standard was approved by CEN on 2 February 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1366-7:2004: ESIST EN 1366-7:2004

Arrangement of unexposed thermocouples on closures for conveyor systems with non-rectangular shapes.52 Annex B (normative)
Part configuration test specimen.53 B.1 General.53 B.2 Changes to the penetrating components.53 B.3 Large test specimen.53 Annex C (informative)
General guidance on the design of closure and conveyor system assemblies and their classification for self closing durability.55 C.1 General.55 C.2 Self closing durability.55 C.3 General guidance for closure and conveyor system assemblies.56 Bibliography.57
Ducts Part 2:
Fire dampers Part 31):
Penetration seals Part 41):
Linear joint seals Part 5:
Service ducts and shafts Part 61):
Raised access floors and hollow floors Part 7: Conveyor systems and their closures Part 81):
Smoke extraction ducts Part 91):
Single compartment smoke extraction ducts Part 101): Smoke control dampers Part 111): Fire protective systems for essential services Annex A and annex B are normative and annex C is informative.
1) In course of preparation.
Introduction This part of this European Standard was developed to provide a method of fire resistance testing for assessing the contribution of a closure for a conveyor system together with all its anchoring parts and the frame/guide included to the fire resistance of a separating element when penetrated by a conveyor system including any relevant penetrating components. Caution The attention of all persons concerned with managing and carrying out this fire resistance test is drawn to the fact that fire testing may be hazardous and that there is a possibility that toxic and/or harmful smoke and gases may be evolved during the test. Mechanical and operational hazards may also arise during the construction of the test elements or structures, their testing and disposal of test residues. An assessment of all potential hazards and risks to health should be made and safety precautions should be identified and provided. Written safety instructions should be issued. Appropriate training should be given to relevant personnel. Laboratory personnel should ensure that they follow written safety instructions at all times. SIST EN 1366-7:2004

1 Scope This part of this European Standard specifies a method of fire testing to determine the fire resistance of closure and conveyor system assemblies designed for installation within openings of separating elements, including any sealing necessary between the closure for a conveyor system and any penetrating components like conveyor tracks, electrical cables and pneumatic pipes being essential parts of the closure and conveyor system assembly together with the penetration seal. This part of European Standard is not applicable to other test methods required to fully assess closures for conveyor systems, e.g. test methods to evaluate the serviceability and reliable functioning of interconnected systems. The fire testing of fire dampers for heating and ventilation systems, fire doors and shutters for normal traffic paths and the movement of liquid and combustible gas, are specifically excluded from this European Standard. This European Standard is read in conjunction with EN 1363-1. In the absence of any European Technical Specification for closure and conveyor system assemblies, this European Standard gives advice on the classification of durability for closure and conveyor system assemblies. 2 Normative references This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). prEN 520, Gypsum plasterboards — Definitions, requirements and test methods. EN 1191, Windows and doors — Resistance to repeated opening and closing —Test method. EN 1363-1, Fire resistance tests — Part 1: General requirements. EN 1363-2, Fire resistance tests — Part 2: Alternative and additional procedures prEN 1366-3, Fire resistance tests for service installations — Part 3: Penetration seals. EN 1634-1, Fire resistance tests for door and shutter assemblies — Part 1: Fire doors and shutters. EN 12605, Industrial, commercial and garage doors and gates — Mechanical aspects — Test methods. EN 13501-2, Fire classification of construction products and building elements — Part 2: Classification using data from fire resistance tests, excluding ventilation services. EN ISO 13943, Fire safety — Vocabulary (ISO 13943:2000). SIST EN 1366-7:2004
...