FprEN 4500-003

Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys

The EN 4500 series specifies the rules for the drafting and presentation of metallic material standards for aerospace applications. This Part 003 specifies the "Specific rules for heat resisting alloys".

Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die Gestaltung von Werkstoffnormen - Teil 003: Besondere Regeln für hochwarmfeste Legierungen

No Scope available

Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation des normes de matériaux - Partie 003 : Règles spécifiques aux alliages résistant à chaud

La série EN 4500 spécifie les règles pour la rédaction et la présentation des normes de matériaux métalliques pour les applications aérospatiales.
La présente Partie 003 spécifie les « Règles spécifiques aux alliages résistant à chaud ».

Aeronavtika - Kovinski materiali - Pravila za načrtovanje in predstavljanje standardov za materiale - 003. del: Posebna pravila za toplotno odporne zlitine

General Information

• Status: Not Published
• Publication Date: 18-Aug-2024
• ICS: 01.120 - Standardization. General rules
• ICS: 49.025.05 - Ferrous alloys in general
• ICS: 49.025.15 - Non-ferrous alloys in general
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 4/S 11 - Composite Material
• Current Stage: 6055 - CEN Ratification completed (DOR) - Publishing
• Start Date: 17-Jun-2024
• Completion Date: 17-Jun-2024
• Ref Project: kSIST FprEN 4500-003:2024 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys

Relations

• Revises: EN 4500-003:2012 - Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys
• Effective Date: 18-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 4500-003:2022
01-februar-2022
Aeronavtika - Kovinski materiali - Pravila za načrtovanje in predstavljanje
standardov za materiale - 003. del: Posebna pravila za toplotno odporne zlitine
Aerospace series - Metallic materials - Rules for drafting and presentation of material
standards - Part 003: Specific rules for heat resisting alloys
Luft- und Raumfahrt - Metallische Werkstoffe - Regeln für das Erstellen und die
Gestaltung von Werkstoffnormen - Teil 003: Besondere Regeln für hochwarmfeste
Legierungen
Série aérospatiale - Matériaux métalliques - Règles pour la rédaction et la présentation
des normes de matériaux - Partie 003: Règles spécifiques aux alliages résistant à chaud
Ta slovenski standard je istoveten z: prEN 4500-003
ICS:
49.025.05 Železove zlitine na splošno Ferrous alloys in general
49.025.15 Neželezove zlitine na Non-ferrous alloys in general
splošno
oSIST prEN 4500-003:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN 4500-003:2022
oSIST prEN 4500-003:2022
DRAFT
EUROPEAN STANDARD
prEN 4500-003
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2021
ICS 49.025.05; 49.025.15 Will supersede EN 4500-003:2012
English Version
Aerospace series - Metallic materials - Rules for drafting
and presentation of material standards - Part 003: Specific
rules for heat resisting alloys
Série aérospatiale - Matériaux métalliques - Règles Luft- und Raumfahrt - Metallische Werkstoffe - Regeln
pour la rédaction et la présentation des normes de für das Erstellen und die Gestaltung von
matériaux - Partie 003: Règles spécifiques aux alliages Werkstoffnormen - Teil 003: Besondere Regeln für
résistant à chaud hochwarmfeste Legierungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4500-003:2021 E
worldwide for CEN national Members.

oSIST prEN 4500-003:2022
prEN 4500-003:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Rules for drafting a European Standard for aerospace metallic materials . 5
4.1 General. 5
4.2 Title . 5
4.3 Introduction . 8
4.4 Scope, normative references, terms and definitions, requirements . 8
4.5 Table 1 (1 of 3) . 8
4.6 Table 1 (2 of 3) . 11
4.7 Table 1 (3 of 3) . 11
4.8 Bibliography . 11
Annex A (informative) Completion of the title page . 12
Annex B (informative) Completion of the introduction . 13
Annex C (informative) Completion of the scope, normative references, terms and
definitions, requirements . 14
Annex D (informative) Completion of Table 1 (1 of 3) . 15
Table 1 (1 of 3) . 15
Annex E (informative) Completion of Table 1 (2 of 3) . 17
Table 1 (2 of 3) . 17
Annex F (informative) Completion of Table 1 (3 of 3) . 21
Annex G (informative) Completion of the bibliography . 25
Bibliography . 26

oSIST prEN 4500-003:2022
prEN 4500-003:2021 (E)
European foreword
This document (prEN 4500-003:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 4500-003:2012.
oSIST prEN 4500-003:2022
prEN 4500-003:2021 (E)
Introduction
This document is part of the series of EN metallic material standards for aerospace applications. The
general organization of this series is described in EN 4258.
The EN 4500 series (Aerospace series — Metallic materials — Rules for drafting and presentation of
material standards) is composed by the following documents:
• General rules EN 4500-001;
• Aluminium, aluminium alloys and magnesium alloys EN 4500-002;
• Heat-resisting alloys EN 4500-003;
• Titanium and titanium alloys EN 4500-004;
• Steels EN 4500-005;
• Filler metals for welding EN 4500-002 to EN 4500-005;
• Filler metals for brazing EN 4500-006.
oSIST prEN 4500-003:2022
prEN 4500-003:2021 (E)
1 Scope
The EN 4500 series specifies the rules for the drafting and presentation of metallic material standards
for aerospace applications. This Part 003 specifies the “Specific rules for heat resisting alloys”.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
FprEN 4259, Aerospace series — Metallic materials — Definitions of general terms
EN 4500-001, Aerospace series — Metallic materials — Rules for drafting and presentation of material
standards — Part 001: General rules
EN 10027-1, Designation systems for steels — Part 1: Steel names
EN 10027-2, Designation systems for steels — Part 2: Numerical system
3 Terms and definitions
For the purposes of this document, the terms and definitions given in FprEN 4259 and EN 4500-001
apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
• ISO Online browsing platform: available at https://www.iso.org/obp
• IEC Electropedia: available at https://www.electropedia.org/
4 Rules for drafting a European Standard for aerospace metallic materials
4.1 General
Examples given in Annexes are only intended to illustrate the rules for drafting and presentation and
may not correspond to real standardized EN semi-finished products. Technological development may
require the use of terms additional to those listed.
4.2 Title
4.2.1 General
According to EN 4500-001 and Annex A of this document.
The following are examples of descriptions which shall be used.
4.2.2 Method of melting
Complete in accordance with EN 4500-001 using one or more of the following terms:
• air melted;
• vacuum melted;
• vacuum refined;
oSIST prEN 4500-003:2022
prEN 4500-003:2021 (E)
• vacuum arc melted;
• vacuum arc remelted;
• electro-slag remelted;
• consumable electrode remelted;
• inert gas atomised;
• rotating electrode atomised;
• rotating crucible atomised;
• water atomised.
4.2.3 Form entries
a) Sheets, strips, plates;
The term may be qualified with one of the following terms:
1) rolled;
2) cold rolled;
3) hot rolled;
b) bars;
The term may be qualified with one or more of the following terms:
1) hot rolled;
2) cold rolled;
3) drawn;
4) extruded;
c) sections;
The term may be qualified with one or more of the following terms:
1) extruded;
2) hot rolled;
oSIST prEN 4500-003:2022
prEN 4500-003:2021 (E)
d) tubes;
The term may be qualified with one or more of the following terms:
1) rolled;
2) drawn;
3) extruded;
4) seamless;
5) welded;
e) wires;
The term may be qualified with one or more of the following terms:
1) drawn;
2) hot rolled;
f) forging stock;
g) forgings;
The term may be qualified with one or more of the following terms:
1) die;
2) hand;
h) remelting stock;
i) castings;
The term may be qualified with one or more of the following terms:
1) sand;
2) chill;
3) investment;
4) centrifugal;
5) precision;
6) hot isostatically pressed (hipped).
oSIST prEN 4500-003:2022
prEN 4500-003:2021 (E)
4.2.4 Form entries for powder metallurgy
• Powder;
• compacted material;
• part;
The term may be qualified with one or more of the following terms:
• hot isostatically pressed (hipped);
• extruded;
• forged.
4.2.5 Additional information entries
• For structural applications;
• for pressure applications;
• for rivets;
• for forged fasteners;
• for forged rings;
• for machined fasteners;
• for welding.
4.3 Introduction
According to EN 4500-001 and Annex B of this document.
4.4 Scope, normative references, terms and definitions, requirements
According to EN 4500-001 and Annex C of this document.
4.5 Table 1 (1 of 3)
4.5.1 Line 1: Material designation
According to EN 4500-001 and Annex D of this document.
For steels, the designation shall be according to EN 10027-1 and EN 10027-2.
4.5.2 Line 2: Chemical composition
The chemical composition shall be written in accordance with EN 4500-001 and the order of
presentation of elements shall conform to the following rules:
• C, Si, Mn, P, S;
• alloying elements in alphabetical order using their chemical symbol;
oSIST prEN 4500-003:2022
prEN 4500-003:2021 (E)
• ratio and/or total of above elements in alphabetical order;
• trace elements in alphabetical order.
4.5.3 Line 3: Method of melting
According to EN 4500-001 and Annex D of this document, using the terms listed in 4.2.2.
4.5.4 Line 4.1: Form
According to EN 4500-001, and Annex D of this document.
4.5.5 Line 4.2: Method of production
According to EN 4500-001, and Annex D of this document, using the applicable terms given in 4.2.
4.5.6 Line 4.3: Limit dimension(s)
According to EN 4500-001 and Annex D of this document.
4.5.7 Line 5: Technical specification
According to EN 4500-001 and Annex D of this document.
4.5.8 Line 6.1: Delivery condition and Heat treatment
According to EN 4500-001 and Annex D of this document. One or more of the following terms shall be
used:
• not heat treated;
• annealed;
• solution treated;
• precipitation treated;
• tempered;
• cold worked;
• hot isostatically pressed (hipped);
• descaled;
• machined;
• ground;
• as cast;
• as forged.
4.5.9 Line 6.2: Delivery condition code
According to EN 4500-001 and Annex D of this document.
...