EN ISO 20504:2016

Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature (ISO 20504:2006)

ISO 20504:2006 describes procedures for determination of the compressive behaviour of ceramic matrix composite materials with continuous fibre reinforcement at room temperature. This method applies to all ceramic matrix composites with a continuous fibre reinforcement, uni-directional , bi-directional, and tri-directional, tested along one principal axis of reinforcement. This method may also be applied to carbon-fibre-reinforced carbon matrix composites (also known as: carbon/carbon or C/C). Two cases of testing are distinguished: compression between platens and compression using grips.

Hochleistungskeramik - Bestimmung der Eigenschaften unter Druck von endlosfaserverstärkten Verbundwerkstoffen bei Raumtemperatur (ISO 20504:2006)

Diese Internationale Norm beschreibt Verfahren zur Bestimmung der Eigenschaften unter Druck von endlosfaserverstärkten Verbundwerkstoffen mit keramischer Matrix bei Raumtemperatur. Dieses Verfahren gilt für alle keramischen Verbundwerkstoffe mit unidirektionaler (1D), bidirektionaler (2D) und mehrdirektionaler (xD, mit 2 < x ≤ 3) Endlosfaserverstärkung, die parallel zu einer der Haupt-verstärkungsachsen beansprucht werden. Dieses Verfahren darf außerdem bei kohlen¬stoff¬faser¬verstärkten Verbundwerkstoffen mit Kohlenstoffmatrix (auch als Kohlenstoff/Kohlenstoff oder C/C bezeichnet) angewendet werden. Es werden zwei Fälle von Prüfungen unterschieden: Druckbeanspruchung zwischen Platten und Druckbeanspruchung unter Verwendung von Einspann¬einrichtungen.

Céramiques techniques - Méthode d'essai de résistance à la compression des composites renforcés de fibres continues à température ambiante (ISO 20504:2006)

L'ISO 20504:2006 décrit des méthodes permettant de déterminer les caractéristiques en compression des matériaux composites à matrice céramique avec renfort de fibres continues à température ambiante. La présente Norme internationale s'applique à tous les composites à matrice céramique avec renfort de fibres continues, unidirectionnel (1D), bidirectionnel (2D), et tridirectionnel (xD, avec 2 < x ≤ 3), sollicités suivant un axe principal de renfort. Elle peut également s'appliquer aux composites à matrice de carbone avec renfort de fibres de carbone (également connus en tant que carbone/carbone ou C/C). Deux cas de compression sont distingués: la compression entre plateaux et la compression entre mors.

Fina keramika (sodobna keramika, sodobna tehnična keramika) - Metoda za preskušanje tlačnih lastnosti kompozitov, ojačenih z neskončno dolgimi vlakni, pri sobni temperaturi (ISO 20504:2006)

Ta mednarodni standard opisuje postopke za določanje vedenja keramičnih matričnih kompozitnih materialov z neprekinjeno ojačitvijo vlaken pri stiskanju pri sobni temperaturi. Ta metoda se uporablja za vse keramične matrične kompozite z neprekinjeno ojačitvijo vlaken, enosmerno (1D), dvosmerno (2D) in trismerno (xD, kjer je 2 < x ≤ 3), preskušenih vzdolž ene glavne osi ojačitve. Ta metoda se lahko uporabi tudi za karbonske matrične kompozite s karbonskimi vlakni (imenovane tudi: karbon/karbon ali C/C). Razlikujemo med dvema primeroma preskušanja: stiskanje med stiskalnimi valji in stiskanje z ročaji.

General Information

• Status: Withdrawn
• Publication Date: 19-Apr-2016
• Withdrawal Date: 24-Sep-2019
• ICS: 81.060.30 - Advanced ceramics
• Technical Committee: CEN/TC 184 - Advanced technical ceramics
• Drafting Committee: CEN/TC 184 - Advanced technical ceramics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 25-Sep-2019
• Ref Project: SIST EN ISO 20504:2016 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for compressive behaviour of continuous fibre-reinforced composites at room temperature (ISO 20504:2006)

Relations

• Replaces: EN 658-2:2002 - Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties
• Effective Date: 27-Apr-2016
• Replaced By: EN ISO 20504:2019 - Fine ceramics (advanced ceramics, advanced technical ceramics) - Mechanical properties of ceramic composites at room temperature - Determination of compressive properties (ISO 20504:2019)
• Effective Date: 02-Oct-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 20504:2016
01-junij-2016
1DGRPHãþD
SIST EN 658-2:2004
)LQDNHUDPLNDVRGREQDNHUDPLNDVRGREQDWHKQLþQDNHUDPLND0HWRGD]D
SUHVNXãDQMHWODþQLKODVWQRVWLNRPSR]LWRYRMDþHQLK]QHVNRQþQRGROJLPLYODNQLSUL
VREQLWHPSHUDWXUL,62
Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for
compressive behaviour of continuous fibre-reinforced composites at room temperature
(ISO 20504:2006)
Hochleistungskeramik - Bestimmung der Eigenschaften unter Druck von
endlosfaserverstärkten Verbundwerkstoffen bei Raumtemperatur (ISO 20504:2006)
Céramiques techniques - Méthode d'essai de résistance à la compression des
composites renforcés de fibres continues à température ambiante (ISO 20504:2006)
Ta slovenski standard je istoveten z: EN ISO 20504:2016
ICS:
81.060.30 Sodobna keramika Advanced ceramics
SIST EN ISO 20504:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 20504:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 20504:2016


EN ISO 20504
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2016
EUROPÄISCHE NORM
ICS 81.060.30 Supersedes EN 658-2:2002
English Version

Fine ceramics (advanced ceramics, advanced technical
ceramics) - Test method for compressive behaviour of
continuous fibre-reinforced composites at room
temperature (ISO 20504:2006)
Céramiques techniques - Méthode d'essai de résistance Hochleistungskeramik - Bestimmung der
à la compression des composites renforcés de fibres Eigenschaften unter Druck von endlosfaserverstärkten
continues à température ambiante (ISO 20504:2006) Verbundwerkstoffen bei Raumtemperatur (ISO
20504:2006)
This European Standard was approved by CEN on 25 March 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20504:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 20504:2016
EN ISO 20504:2016 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 20504:2016
EN ISO 20504:2016 (E)
European foreword
The text of ISO 20504:2006 has been prepared by Technical Committee ISO/TC 206 “Fine ceramics” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 20504:2016
by Technical Committee CEN/TC 184 “Advanced technical ceramics” the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall
be withdrawn at the latest by October 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 658-2:2002.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sw
...