EN 4627:2007

Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De ≤ 150 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa

This standard specifies the requirements relating to:
Steel FE-PM 3504 (X4CrNiMo16-5-1)
Air melted
Hardened and tempered
Forgings
De ≤ 150 mm
1 100 MPa ≤ Rm ≤ 1 300 MPa
for aerospace applications.

Luft- und Raumfahrt - Stahl FE-PM 3504 (X4CrNiMo16-5-1) - Lufterschmolzen - Gehärtet- und angelassen - Schmiedestücke - De ≤ 150 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa

Diese Norm legt die Anforderungen an
Stahl FE-PM 3504 (X4CrNiMo16-5-1),
lufterschmolzen,
gehärtet und angelassen,
Schmiedestücke,
De≤ 150 mm,
1 100 MPa ≤ Rm ≤ 1 300 MPa
zur Verwendung in der Luft- und Raumfahrt fest.

Série aérospatiale - Acier FE-PM 3504 (X4CrNiMo16-5-1) - Élaboré à l'air - Trempé et revenu - Pièces forgées - De ≤ 150 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa

Aeronavtika - Jeklo FE-PM 3504 (X4CrNiMo16-5-1) - Taljeno - Utrjeno in mehko žarjeno - Izkovki - De =< 150 mm - 1 100 MPa =< Rm =< 1 300 MPa

General Information

• Status: Withdrawn
• Publication Date: 18-Dec-2007
• Withdrawal Date: 29-Apr-2014
• ICS: 49.025.10 - Steels
• Technical Committee: ASD-STAN - Aerospace
• Drafting Committee: ASD-STAN/D 3 - Mechanical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 30-Apr-2014
• Completion Date: 30-Apr-2014
• Ref Project: SIST EN 4627:2008 - Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De ≤ 150 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa

Relations

• Replaced By: EN 4627:2014 - Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De ≤ 200 mm - 1 150 MPa ≤ Rm ≤ 1 300 MPa
• Effective Date: 11-Jul-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aeronavtika - Jeklo FE-PM 3504 (X4CrNiMo16-5-1) - Taljeno - Utrjeno in mehko žarjeno - Izkovki -
De =< 150 mm - 1 100 MPa =< Rm =< 1 300 MPaDTa slovenski standard je istoveten z:EN 4627:2007SIST EN 4627:2008en49.025.10ICS:SLOVENSKI
STANDARDSIST EN 4627:200801-marec-2008







EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4627
December 2007 ICS 49.025.10 English Version
Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De ≤ 150 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa
Série aérospatiale - Acier FE-PM 3504 (X4CrNiMo16-5-1) -Élaboré à l'air - Trempé et revenu - Pièces forgées - De ≤ 150 mm - 1 100 MPa ≤ Rm ≤ 1 300 MPa
Luft- und Raumfahrt - Stahl FE-PM 3504 (X4CrNiMo16-5-1) - Lufterschmolzen - Gehärtet- und angelassen - Schmiedestücke - De ≤ 150 mm - 1 100 MPa ≤ Rm ≤1 300 MPa This European Standard was approved by CEN on 23 June 2007.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 4627:2007: E



EN 4627:2007 (E) 2 Foreword This document (EN 4627:2007) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2008, and conflicting national standards shall be withdrawn at the latest by June 2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.



EN 4627:2007 (E) 3 Introduction This standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. 1 Scope This standard specifies the requirements relating to: Steel FE-PM 3504 (X4CrNiMo16-5-1) Air melted Hardened and tempered
Forgings De ≤ 150 mm 1 100 MPa ≤ Rm ≤ 1 300 MPa for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2002-8, Aerospace series — Metallic materials — Test methods — Part 8: Micrographic determination of grain size. 1) EN 4050-4, Aerospace series — Test method for metallic materials — Ultrasonic inspection of bars, plates, forging stock and forgings — Part 4: Acceptance criteria. 1) EN 4258, Aerospace series — Metallic materials — General organization of standardization — Links between types of EN standards and their use. EN 4500-5, Aerospace series — Metallic materials — Rules for drafting and presentation of material standards — Part 5: Specific rules for steels. 1) EN 4629, Aerospace series — Steel FE-PM 3504 (X4CrNiMo16-
...