EN ISO 11681-1:2008

Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd 1:2007)

ISO 11681-1:2004 deals with the significant hazards and specifies safety requirements and their verification for design and construction of portable combustion-engine, hand-held chain-saws, designed only for use by one operator and intended for forest work. It describes methods for the elimination or reduction of hazards arising from their use. In addition it specifies the type of information on safe working practices to be provided by the manufacturer. It deals with all significant hazards. It does not cover the hazard from kickback for machines with an engine displacement over 80 cm3. The environmental aspects, except for noise, have not been considered in this standard.
Chain-saws covered by ISO 11681-1:2004 are designed for use by persons having read and understood the safety requirements in the instruction handbook and using the appropriate personal protective equipment (PPE). The chain-saws covered are designed only to be operated with the right hand on the rear handle and the left hand on the front handle.
ISO 11681-1:2004 is not applicable to chain-saws which are manufactured before the date of publication of this document.

Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfungen für tragbare Kettensägen - Teil 1: Kettensägen für die Waldarbeit (ISO 11681-1:2004, einschließlich Amd 1:2007)

Dieser Teil Teil der ISO ISO 11681 behandelt signifikante Gefährdungen und die sicherheitstechnischen Anforderungen und deren Feststellung der Übereinstimmung für Gestaltung und Konstruktion von tragbaren handgeführten Kettensägen mit Antrieb durch Verbrennungsmotor für Einmannbetrieb bei der Waldarbeit.
Er beschreibt Methoden zur Vermeidung oder Verminderung der sich aus dem Gebrauch ergebenden Gefährdungen. Außerdem enthält er Informationen über sicheres Arbeiten, die vom Hersteller zur Verfügung zu stellen sind.
Er behandelt alle signifikanten Gefährdungen.
Er behandelt keine Gefährdung durch Rückschlag für Maschinen mit einem Hubraum über 80 cm3. Die Gefährdung der Umwelt wird nicht in Betracht gezogen.
Dieser Teil Teil der ISO ISO 11681 behandelt keine Gefährdung durch Rückschlag (siehe 5.5.1.3) oder Gleichgewicht (siehe 5.4.1) für Maschinen mit einem Hubraum über 80 cm3.

Matériel forestier - Exigences de sécurité et essais des scies à chaîne portatives - Partie 1: Scies à chaîne pour travaux forestiers (ISO 11681-1:2004, Amd 1:2007 inclus)

L'ISO 11681-1:2004 spécifie les exigences de sécurité, et leur vérification, pour la conception et la construction des scies à chaîne portatives à moteur à combustion, utilisées par un seul opérateur et destinées au travail forestier.
Elle décrit les méthodes pour éliminer ou réduire les phénomènes dangereux inhérents à l'utilisation des scies à chaîne couvertes. En outre, elle spécifie le type d'informations que le fabricant doit donner sur les pratiques d'utilisation sûre.
Elle traite de tous les phénomènes dangereux significatifs. Elle ne traite pas du danger dû au rebond pour les scies de cylindrée supérieure à 80 cm3. Les aspects liés à l'environnement, sauf le bruit, n'ont pas été pris en compte.
Les scies à chaîne couvertes par l'ISO 11681-1:2004 sont conçues pour être utilisées par des personnes ayant lu et compris les exigences de sécurité de la notice d'instructions et faisant usage d'équipements de protection individuelle (EPI). Les scies à chaîne couvertes sont conçues uniquement pour être manoeuvrées avec la main droite sur la poignée arrière et la main gauche sur la poignée avant.
L'ISO 11681-1:2004 n'est pas applicable aux scies à chaîne fabriquées avant sa date de publication.

Gozdarski stroji - Zahteve za varnost in preskušanje prenosnih motornih verižnih žag - 1. del: Žage za nego gozda (ISO 11681-1:2004, vključno z Amd 1:2007)

General Information

• Status: Withdrawn
• Publication Date: 04-Nov-2008
• Withdrawal Date: 30-Nov-2011
• ICS: 65.060.80 - Forestry equipment
• Technical Committee: CEN/TC 144 - Tractors and machinery for agriculture and forestry
• Drafting Committee: CEN/TC 144 - Tractors and machinery for agriculture and forestry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 01-Dec-2011
• Completion Date: 01-Dec-2011
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: SIST EN ISO 11681-1:2009 - Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd 1:2007)

Relations

• Replaces: EN ISO 11681-1:2004/A1:2007 - Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service - Amendment 1: Balance (ISO 11681-1:2004/Amd 1:2007)
• Effective Date: 22-Dec-2008
• Replaces: EN ISO 11681-1:2004 - Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 11681-1:2011 - Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2011)
• Effective Date: 14-Dec-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfung für tragbare Kettensägen - Teil 1: Kettensägen für die Waldarbeit (ISO 11681-1:2004, einschließlich Änderung 1:2007)Matériel forestier - Exigences de sécurité et essais des scies à chaîne portatives - Partie 1: Scies à chaîne pour travaux forestiers (ISO 11681-1:2004, Amd 1:2007 inclus)Machinery for forestry - Portable chain-saw safety requirements and testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd 1:2007)65.060.80Gozdarska opremaForestry equipmentICS:Ta slovenski standard je istoveten z:EN ISO 11681-1:2008SIST EN ISO 11681-1:2009en,fr,de01-maj-2009SIST EN ISO 11681-1:2009SLOVENSKI
STANDARDSIST EN ISO 11681-1:2004/A1:2007SIST EN ISO 11681-1:20041DGRPHãþD



SIST EN ISO 11681-1:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 11681-1November 2008ICS 65.060.80Supersedes EN ISO 11681-1:2004
English VersionMachinery for forestry - Portable chain-saw safety requirementsand testing - Part 1: Chain-saws for forest service (ISO 11681-1:2004, including Amd 1:2007)Matériel forestier - Exigences de sécurité et essais desscies à chaîne portatives - Partie 1: Scies à chaîne pourtravaux forestiers (ISO 11681-1:2004, Amd 1:2007 inclus)Forstmaschinen - Sicherheitstechnische Anforderungenund Prüfung für tragbare Kettensägen - Teil 1: Kettensägenfür die Waldarbeit (ISO 11681-1:2004, einschließlichÄnderung 1:2007)This European Standard was approved by CEN on 15 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 11681-1:2008: ESIST EN ISO 11681-1:2009



EN ISO 11681-1:2008 (E) 2 Contents Page Foreword.3 Annex ZA (Informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC.4 Annex ZB (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC.5
SIST EN ISO 11681-1:2009



EN ISO 11681-1:2008 (E) 3 Foreword The text of ISO 11681-1:2004, including Amd 1:2007 has been prepared by Technical Committee ISO/TC 23 “Tractors and machinery for agriculture and forestry” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 11681-1:2008 by Technical Committee CEN/TC 144 “Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 11681-1:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relationship with EC Directives, see informative Annexes ZA and ZB, which are an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria
...