iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 76:1978

(Main)

Packages for certain prepacked foodstuffs - Capacities of glass and metal containers

Packages for certain prepacked foodstuffs - Capacities of glass and metal containers

This European Standard specifies capacities of glass and round rigid metal containers for the packaging of preserves (and semi-preserves) of vegetable products * (fruit, vegetables, tomatoes, potatoes) for human consumption.
Excluded from this standard are containers for pre-packaging jams, marmalades, chestnut paste, soups, sauces, baby foods, fruit and vegetable juices and all frozen and dries vegetable products. Also excluded are vent-hole and "à décollage" metal containers.

Packmittel für Fertigpackungen von bestimmten Nahrungsmitteln - Volumen von Packmitteln aus Glas und Metall

Emballages pour certains produits alimentaires préemballés - Capacités des récipients en verre et métalliques

Embalaža za določena predpakirana živila - Prostornina steklene in kovinske embalaže

General Information

Status
Published
Publication Date
04-Dec-1978
Withdrawal Date
04-Jun-1979
ICS
55.100 - Bottles. Pots. Jars
Technical Committee
CEN/TC 261 - Packaging
Drafting Committee
CEN/TC 261 - Packaging
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
03-Feb-2021
Directive
80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
Ref Project
SIST EN 76:1998 - Packages for certain prepacked foodstuffs - Capacities of glass and metal containers

Buy Standard

EN 76:1998EN 76:1998
PreviousNext
Standard
EN 76:1998
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 76:1998
01-oktober-1998
(PEDODåD]DGRORþHQDSUHGSDNLUDQDåLYLOD3URVWRUQLQDVWHNOHQHLQNRYLQVNH
HPEDODåH
Packages for certain prepacked foodstuffs - Capacities of glass and metal containers
Packmittel für Fertigpackungen von bestimmten Nahrungsmitteln - Volumen von
Packmitteln aus Glas und Metall
Emballages pour certains produits alimentaires préemballés - Capacités des récipients
en verre et métalliques
Ta slovenski standard je istoveten z: EN 76:1978
ICS:
55.100 Steklenice. Lonci. Kozarci Bottles. Pots. Jars
SIST EN 76:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 76:1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17827:2023(Main)
Glass packaging - Finishes for sparkling wines produced by the traditional method (26 mm, 29 mm, 36 mm)
SIST EN 17827:2023

This document gives dimensions and specifications of the glass finishes for bottles intended for sparkling wine produced by the "traditional method", with a diameter of 26 mm, 29 mm or 36 mm.
NOTE 1   The finish is to receive a crown cap and a cork stopper.
NOTE 2   The dimensions of the 26 mm and 29 mm finish come from the French standard NF H 35-029.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17829:2023(Main)
Glass packaging - 28 millimetre-screw finishes (MCA range) - Dimensions
SIST EN 17829:2023

This document specifies the dimensions of the various 28 mm screw finishes for glass containers designated MCA.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17665:2022+A1:2023(Main)
Packaging - Test methods and requirements to demonstrate that plastic caps and lids remain attached to beverage containers
SIST EN 17665:2022+A1:2023

This document specifies the requirements and test methods to demonstrate that plastic caps and lids of single-use beverage containers with a capacity of up to three litres remain attached to the container during the product’s intended use stage. This document also addresses the need to ensure the necessary strength, reliability and safety of beverage container closures, including those for carbonated drinks.
This document applies to the strength, reliability and safety impacted by the attachment features and does not apply to the overall closure system.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16592:2022(Main)
Packaging - Rigid plastic containers - PET finish 29/25 (12,6)
SIST EN 16592:2023

This document specifies the design and dimensions of the 29 mm screw finish with three (3) thread starts for flat waters and non-carbonated beverages.
This document applies to finishes designated as PET finishes 29/25 (12,6). The dimension (12,6) is the height in millimetres from the top of finish to the bottom of the support ledge.
This finish can be used for aseptic filling and filling which utilizes nitrogen pressure where the internal overpressure does not exceed 1 bar maximum.
This finish is designed to accept only a tamper evident plastic closure, including those with an attachment feature.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16293:2020(Main)
Packaging - Glass Packaging - Deep BVS finishes for still wines
SIST EN 16293:2020

This document specifies dimensions of a series of deep screw finishes for the closure of wines with a CO2 content below 1,2 g per litre.
NOTE   Carbonation ≥ 1,2 g/l CO2 requires a suitable container and closure agreed between the glass maker, closure maker and packer/filler.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12822:2020(Main)
Glass packaging - 26 H 126 crown finish - Dimensions (ISO 12822:2020)
SIST EN ISO 12822:2020

This document specifies the dimensions of the 26 mm-shallow crown finish for glass bottles containing beverages. The shallow crown finish is designed to use a metal crown cap (see Reference [2]).

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12821:2019(Main)
Glass packaging - 26 H 180 crown finish - Dimensions (ISO 12821:2019)
SIST EN ISO 12821:2020

This document specifies the dimensions of the 26 mm tall crown finish for glass bottles containing beverages. The tall crown finish is designed to use a metal crown cap (see e.g. EN 17177).

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17177:2019(Main)
Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap
SIST EN 17177:2019

This document specifies the dimensional requirements for the 26 mm diameter, 6 mm height crown cap, lined with a plastic gasket and designed to seal bottles with neck finishes foreseen for pry-off or twist-crown applications.
It specifies the dimensional requirements that are of direct importance to the customer/bottler and recommendations for cap application.
The gasket material and profile are not specified as a number of different profiles are available depending on the end use and supplier specific technology. The requirement placed on the gasket profile design is that it needs to be fit for purpose used in conjunction with glass finishes in reference.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12726:2018(Main)
Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules
SIST EN 12726:2018

This European Standard specifies the dimensions of a cork mouth finish for corks and capsules for glass bottles, for wine that has a carbonation pressure not exceeding 1,2 g CO2/l, for use with natural corks.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 12818:2015(Main)
Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)
SIST EN ISO 12818:2015

ISO 12818:2013 specifies the tolerances for the bottles intended to be used for pharmaceutical products, cosmetic and perfumery products and chemical products. The tolerances concerned are brimful capacity, height, diameter and width, and verticality.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day