iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 12967-3:2011

(Main)

Health informatics - Service architecture - Part 3: Computational viewpoint (ISO 12967-3:2009)

Health informatics - Service architecture - Part 3: Computational viewpoint (ISO 12967-3:2009)

ISO 12967-3:2009 specifies the fundamental characteristics of the computational model to be implemented by a specific architectural layer of the information system (i.e. the middleware) to provide a comprehensive and integrated interface to the common enterprise information and to support the fundamental business processes of the healthcare organization, as defined in ISO 12967-1. The computational model is specified without any explicit or implicit assumption about the physical technologies, tools or solutions to be adopted for its physical implementation in the various target scenarios. The specification is nevertheless formal, complete and non-ambiguous enough to allow implementers to derive an efficient design of the system in the specific technological environment which will be selected for the physical implementation.

Medizinische Informatik - Servicearchitektur - Teil 3: Verarbeitungssicht (ISO 12967-3:2009)

Informatique de santé - Architecture de service - Partie 3: Point de vue informatique (ISO 12967-3:2009)

L'ISO 12967-3:2009 spécifie les caractéristiques fondamentales du modèle de traitement qu'une couche architecturale spécifique (c'est-à-dire la couche interstitielle) du système d'informations doit mettre en place pour assurer une interface cohérente et intégrée aux données d'entreprise communes et prendre en charge les processus métier fondamentaux de l'organisme de santé, tel que défini dans l'ISO 12967-1. Le modèle de traitement est spécifié sans émettre d'hypothèse explicite ou implicite sur les technologies physiques, les outils ou les solutions à adopter pour sa mise en place physique dans le cadre des différents scénarios cible. La spécification n'en est pas moins formelle, exhaustive et sans ambiguïté, afin de permettre aux implémenteurs de prévoir une conception efficace du système dans l'environnement technologique spécifique sélectionné pour sa mise en place physique.

Zdravstvena informatika - Arhitektura storitve - 3. del: Računalniški vidik (ISO 12967-3:2009)

HISA določa temeljne zahteve za »informacijsko infrastrukturo« in za zdravstvo značilne storitve vmesne programske opreme.
Ta del ISO 12967 določa temeljne značilnosti računalniškega modela, namenjenega implementaciji z določeno arhitekturno plastjo informacijskega sistema (tj. vmesna programska oprema) za zagotavljanje celovitega in integriranega vmesnika do skupnih informacij podjetja in za podporo temeljnih poslovnih procesov zdravstvene organizacije, kot je določeno v ISO 12967-1. Računalniški model je določen brez kakršne koli eksplicitne ali implicitne predpostavke o fizičnih tehnologijah, orodjih ali rešitvah, privzetih za njegovo fizično implementacijo v različne ciljne scenarije. Kljub temu je specifikacija uradna, celovita in dovolj nedvoumna, da omogoča tistim, ki jo implementirajo, izpeljavo učinkovitega načrta sistema v določenem tehnološkem okolju, ki bo izbran za fizično implementacijo.
Računalniški model zagotavlja podlago za zagotavljanje skladnosti med različnimi inženirskimi in tehnološkimi specifikacijami (vključno s programskimi jeziki in komunikacijskimi mehanizmi), saj morajo biti skladne z enakim računalniškim predmetnim modelom. Ta skladnost omogoča odprto medsebojno delovanje in prenosljivost komponent v posledični implementaciji.
Specifikacija ne stremi k predstavitvi fiksne in celotne specifikacije vseh mogočih podatkov, ki so lahko potrebni za katero koli zahtevo katere koli zdravstvene organizacije. Določa samo sklop značilnosti glede na celotno organizacijo in posamične računalniške predmete, določene kot temeljne in skupne vsem zdravstvenim organizacijam, in da temu ustreza računalniški model, implementiran z vmesno programsko opremo.
Ohranjanje skladnosti z določbami tega dela ISO 12967 dopušča fizičnim implementacijam razširitve standardnega računalniškega modela, tako da podpira dodatne in lokalne zahteve.

General Information

Status
Withdrawn
Publication Date
29-Mar-2011
Withdrawal Date
17-Nov-2020
ICS
35.240.70 - IT applications in science
35.240.80 - IT applications in health care technology
Technical Committee
CEN/TC 251 - Medical informatics
Drafting Committee
CEN/TC 251/WG 1 - Information models
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
18-Nov-2020
Ref Project
SIST EN ISO 12967-3:2011 - Health informatics - Service architecture - Part 3: Computational viewpoint (ISO 12967-3:2009)

Relations

Replaces
EN 12967-3:2007 - Health informatics - Service architecture - Part 3: Computational viewpoint
Effective Date
02-Apr-2011
Replaced By
EN ISO 12967-3:2020 - Health informatics - Service Architecture (HISA) - Part 3: Computational viewpoint (ISO 12967-3:2020)
Effective Date
06-Apr-2016

Buy Standard

EN ISO 12967-3:2011 - BARVEEN ISO 12967-3:2011 - BARVE
PreviousNext
Standard
EN ISO 12967-3:2011 - BARVE
English language
35 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12967-3:2011
01-julij-2011
1DGRPHãþD
SIST EN 12967-3:2008
=GUDYVWYHQDLQIRUPDWLND$UKLWHNWXUDVWRULWYHGHO5DþXQDOQLãNLYLGLN ,62

Health informatics - Service architecture - Part 3: Computational viewpoint (ISO 12967-
3:2009)
Medizinische Informatik - Servicearchitektur - Teil 3: Verarbeitungssicht (ISO 12967-
3:2009)
Informatique de santé - Architecture de service - Partie 3: Point de vue informatique (ISO
12967-3:2009)
Ta slovenski standard je istoveten z: EN ISO 12967-3:2011
ICS:
35.240.80 Uporabniške rešitve IT v IT applications in health care
zdravstveni tehniki technology
SIST EN ISO 12967-3:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12967-3:2011

---------------------- Page: 2 ----------------------

SIST EN ISO 12967-3:2011


EUROPEAN STANDARD
EN ISO 12967-3

NORME EUROPÉENNE

EUROPÄISCHE NORM
March 2011
ICS 35.240.70 Supersedes EN 12967-3:2007
English Version
Health informatics - Service architecture - Part 3: Computational
viewpoint (ISO 12967-3:2009)
Informatique de santé - Architecture de service - Partie 3: Medizinische Informatik - Servicearchitektur - Teil 3:
Point de vue informatique (ISO 12967-3:2009) Verarbeitungssicht (ISO 12967-3:2009)
This European Standard was approved by CEN on 10 March 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12967-3:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 12967-3:2011
EN ISO 12967-3:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 12967-3:2011
EN ISO 12967-3:2011 (E)
Foreword
The text of ISO 12967-3:2009 has been prepared by Technical Committee ISO/TC 215 “Health informatics” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO 12967-3:2011 by
Technical Committee CEN/TC 251 “Health informatics” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2011, and conflicting national standards shall be
withdrawn at the latest by September 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12967-3:2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 12967-3:2009 has been approved by CEN as a EN ISO 12967-3:2011 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 12967-3:2011

---------------------- Page: 6 ----------------------

SIST EN ISO 12967-3:2011

INTERNATIONAL ISO
STANDARD 12967-3
First edition
2009-08-15

Health informatics — Service
architecture —
Part 3:
Computational viewpoint
Informatique de santé
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12435:2006(Main)
Health informatics - Expression of results of measurements in health sciences
SIST EN 12435:2006

This document is intended for use by parties to the design, development, acquisition, use and monitoring of health-care related information and information systems. It provides a list of units of measurement to be used in representing values of measurable quantities in health sciences.
The International System of Units forms the basis for this EN. Units with their associated kinds-of-quantity are arranged in order of dimension in Tables 1, 2 and 4 (Clause 5), and in Annex A.
Different kinds-of-quantity may apply to a given combination of component(s) and system. Often the different quantities are interconvertible and examples of such interconvertibility are given in Annex C.
Tables of conversion factors (Annex A) are provided from units in current use to SI units or their multiples.
To represent the result of a measurement (Clause 6), this EN addresses requirements for the following:
¾   relational operator (Clause 4)
¾   numerical value (Subclause 6.1)
¾   uncertainty of measurement (Subclause 6.2; Annex D)
¾   unit of measurement (Clause 5).
This EN covers the requirements for representation of these data elements in displayed and printed form, and provides an approach for support of languages in non-Roman alphabets (Clause 7).
The scope of this standard is limited to textual representation. Support is not provided for the display or printing of images or graphs.
This standard does not cover the requirements for expression of the results of measurements in speech, speech synthesis or handwriting. It does not cover the form and syntax of requests for clinical measurements, nor detailed aspects of data transmission. It refers the user to other CEN standards that address the detailed specification of the interchange format. It does not address the syntax for recording of natural-language statements about quantities, such as those used in recording information about drugs dispensed or about treatment of patients. It does not cover the units of financial quantitie

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12435:2006(Main)
Health informatics - Expression of results of measurements in health sciences
SIST EN 12435:2006

This document is intended for use by parties to the design, development, acquisition, use and monitoring of health-care related information and information systems. It provides a list of units of measurement to be used in representing values of measurable quantities in health sciences.
The International System of Units forms the basis for this EN. Units with their associated kinds-of-quantity are arranged in order of dimension in Tables 1, 2 and 4 (Clause 5), and in Annex A.
Different kinds-of-quantity may apply to a given combination of component(s) and system. Often the different quantities are interconvertible and examples of such interconvertibility are given in Annex C.
Tables of conversion factors (Annex A) are provided from units in current use to SI units or their multiples.
To represent the result of a measurement (Clause 6), this EN addresses requirements for the following:
¾   relational operator (Clause 4)
¾   numerical value (Subclause 6.1)
¾   uncertainty of measurement (Subclause 6.2; Annex D)
¾   unit of measurement (Clause 5).
This EN covers the requirements for representation of these data elements in displayed and printed form, and provides an approach for support of languages in non-Roman alphabets (Clause 7).
The scope of this standard is limited to textual representation. Support is not provided for the display or printing of images or graphs.
This standard does not cover the requirements for expression of the results of measurements in speech, speech synthesis or handwriting. It does not cover the form and syntax of requests for clinical measurements, nor detailed aspects of data transmission. It refers the user to other CEN standards that address the detailed specification of the interchange format. It does not address the syntax for recording of natural-language statements about quantities, such as those used in recording information about drugs dispensed or about treatment of patients. It does not cover the units of financial quantitie

  • Standard
    116 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 22435:2024(Main)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2024)
kSIST FprEN ISO 22435:2024

This document specifies design, type test methods, marking and instruction requirements for cylinder valves with integrated pressure regulators (VIPRs) intended to be fitted to gas cylinders, pressure drums or tubes or used as a main valve for bundles of cylinders that convey compressed, liquefied or dissolved gases.
These are requirements for VIPRs that are in addition to those given in the relevant closure standard, for example, in ISO 10297 for cylinder valves, in ISO 17871 for quick-release cylinder valves, in ISO 17879 for self-closing cylinder valves or in ISO 23826 for ball valves. For ISO 17871, these requirements are only applicable to quick-release cylinder valves types B, C, D and E.
NOTE 1        If the pressure regulating system of a VIPR is acting as the primary valve operating mechanism, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826. This also includes designs where closure of the primary valve operating mechanism of a VIPR is obtained by closing the seat of the pressure regulating system.
NOTE 2        If the primary valve operating mechanism of a VIPR is located at the low-pressure side of the pressure regulating system, it is covered by the relevant closure standard, e.g. ISO 10297, ISO 17871, ISO 17879 and ISO 23826.
NOTE 3        The term “pressure receptacle” is used within this document to cover instances where no differentiation is necessary between gas cylinders, bundles of cylinders, pressure drums and tubes.
This document does not apply to VIPRs for
a)       medical applications (see ISO 10524-3);
b)       liquefied petroleum gas (LPG);
c)        cryogenic applications.
NOTE 4        Additional requirements for a VIPR with a residual pressure device (RPD) are specified in ISO 15996.
NOTE 5        Additional requirements for pressure relief valves can exist in international/regional regulations/ standards.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17015-1:2024(Main)
Electronic Public Procurement - Catalogue - Part 1: Choreographies
kSIST FprEN 17015-1:2024

The purpose of this deliverable is to specify and describe choreographies for exchanging an electronic product catalogue (“catalogues”) as part of the business processes in the pre-award and post-award area, so that catalogues can serve as a basis for placing orders as well as evaluating tenders. The key aspects covered by this choreography specification are:
-   processes for submitting catalogues from the selling to the buying side;
-   processes for submitting catalogue-related data as part of a tendering process;
-   processes integrating sell-side procurement systems.
This document does not apply to the transactions used in the specified choreographies. These transactions are specified in EN 17015 2. The relationship between the choreographies and the transaction is described in Clause 8.
The identifier of this choreographies document is EN 17015 1:2024.
How to claim compliance to this choreography is specified in 6.2.3.

  • Draft
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52927:2024(Main)
Additive manufacturing - General principles - Main characteristics and corresponding test methods (ISO/ASTM 52927:2024)
kSIST FprEN ISO/ASTM 52927:2024

This document specifies the principal requirements applied to the testing of parts produced by additive manufacturing processes.
This document
—     identifies quality characteristics for feedstock and parts and the corresponding test procedures,
—     provides the specific procedures to build specimens using additive manufacturing process, and
—     recommends the scope and content of test and supply agreements.
This document is aimed at machine manufacturers, feedstock suppliers, AM system users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
NOTE            It is the intent to include, in future versions of this document, other characteristics such as thermal properties, electrical requirements and physical and physico-chemical properties based upon material types.

  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8362-2:2024(Main)
Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2024)
SIST EN ISO 8362-2:2024

This document specifies the shape, dimensions, material, performance requirements and labelling of closures for injection vials covered by ISO 8362-1 and ISO 8362-4.
The dimensional requirements are not applicable to barrier-coated closures.
Closures specified in this document are intended for single use only.
NOTE            The potency, purity, stability and safety of a medicinal product during its manufacture and storage can strongly be affected by the nature and performance of the primary packaging.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16739-1:2024(Main)
Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries - Part 1: Data schema (ISO 16739-1:2024)
kSIST FprEN ISO 16739-1:2024

This document represents an open international standard for information used in Building Information Modeling (BIM) that is exchanged and shared among software applications used by the various participants in the construction or facility management industry sector. This document includes definitions that cover information required for buildings and infrastructure works over their life cycle. This edition of the document added coverage of information required for infrastructure facilities including bridges, roads, railways, waterways and port facilities.
This document comprises the publication of a data schema, its documentation, the property and quantity set definitions and the mechanism of an exchange file format structure.
Definitions from this document are used to support different recognized work flows in the construction and facility management industry sector, representing information deliveries. Such information deliveries can be described according to ISO 29481.
Different implementation levels of this document can be defined to better support multiple information deliveries, they are referred to as a Model View Definition (MVD). Each MVD identifies which subset of the definitions of this document imposes requirements for implementation in software applications. Conforming software applications need to identify the model view definition they conform to when applying for software certification.
The following are within the scope of this edition of this document:
BIM exchange format definitions that are required during the life cycle phases of buildings and infrastructure:
demonstrating the need;
conception of need;
outline feasibility;
substantive feasibility study and outline financial authority;
outline conceptual design;
full conceptual design;
coordinated design;
procurement and full financial authority;
production information;
construction;
operation and maintenance.
BIM exchange format definitions that are required by the various disciplines involved within the life cycle phases:
architecture and civil engineering design;
service and utilities engineering;
structural engineering;
procurement;
construction planning;
facility and utility management;
project management;
client requirement management;
industry authorities for permits and approval.
BIM exchange format definitions including:
project structure;
physical components;
spatial components;
analysis items;
processes;
resources;
controls;
actors;
context definition.

  • Draft
    406 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2620:2024(Main)
Analysis of natural gas - Biomethane - Determination of VOCs by thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (ISO 2620:2024)
kSIST FprEN ISO 2620:2024

This document describes a method for sampling and analysis of volatile organic compounds (VOCs), including siloxanes, terpenes, organic sulfur compounds, in natural gas and biomethane matrices, using thermal desorption gas chromatography with flame ionization and/or mass spectrometry detectors (TD-GC-FID/MS).

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4126-10:2024(Main)
Safety devices for protection against excessive pressure - Part 10: Sizing of safety valves and bursting discs for gas/liquid two-phase flow (ISO 4126-10:2024)
kSIST FprEN ISO 4126-10:2023

This document specifies the sizing of safety valves and bursting discs for gas/liquid two-phase flow in pressurized systems such as reactors, storage tanks, columns, heat exchangers, piping systems or transportation tanks/containers, see Figure 2. The possible fluid states at the safety device inlet that can result in two-phase flow are given in Table 1.
NOTE          The pressures used in this document are absolute pressures, not gauge pressures.

  • Draft
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17294-1:2024(Main)
Water quality - Application of inductively coupled plasma mass spectrometry (ICP-MS) - Part 1: General requirements (ISO 17294-1:2024)
kSIST FprEN ISO 17294-1:2023

This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis.
The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day