EN ISO 11844-2:2020

Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2020)

This document specifies methods for determining corrosion rates with standard specimens of metals in indoor atmospheres with low corrosivity. For this direct method of evaluation corrosivity, different sensitive methods can be applied using standard specimens of the following metals: copper, silver, zinc, steel and lead. The values obtained from the measurements are used as classification criteria for the determination of indoor atmospheric corrosivity.

Korrosion von Metallen und Legierungen - Einteilung der Korrosivität von Atmosphären in Innenräumen mit geringer Korrosivität - Teil 2: Bestimmung des Korrosionsangriffs in Innenräumen (ISO 11844-2:2020)

Dieses Dokument legt Verfahren zur Bestimmung von Korrosionsgeschwindigkeiten an Metall-Standard¬proben in Innenräumen mit geringer Korrosivität fest. Für diese direkte Bewertung der Korrosivität können Methoden mit unterschiedlicher Empfindlichkeit angewendet werden, bei denen metallene Standardproben aus Kupfer, Silber, Zink, Stahl und Blei verwendet werden. Die bei den Messungen bestimmten Werte werden als Einteilungskriterien zur Bestimmung der atmosphärischen Korrosivität in Innenräumen ange¬wendet.

Corrosion des métaux et alliages - Classification de la corrosivité faible des atmosphères d'intérieur - Partie 2: Détermination de l'attaque par corrosion dans les atmosphères d'intérieur (ISO 11844-2:2020)

Le présent document spécifie des méthodes de détermination de la vitesse de corrosion avec des éprouvettes normalisées de métaux dans des atmosphères d'intérieur à faible corrosivité. Pour cette évaluation directe de la corrosivité, différentes méthodes sensibles peuvent être appliquées à des éprouvettes normalisées des métaux suivants: cuivre, argent, zinc, acier et plomb. Les valeurs obtenues par mesurage servent de critères de classification pour la détermination de la corrosivité des atmosphères d'intérieur.

Korozija kovin in zlitin - Klasifikacija notranjih atmosfer z nizko korozivnostjo - 2. del: Ugotavljanje napada korozije v zaprtih prostorih (ISO 11844-2:2020)

General Information

• Status: Published
• Publication Date: 09-Jun-2020
• Withdrawal Date: 30-Dec-2020
• ICS: 77.060 - Corrosion of metals
• Technical Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Drafting Committee: CEN/TC 262 - Metallic and other inorganic coatings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 10-Jun-2020
• Completion Date: 10-Jun-2020
• Ref Project: SIST EN ISO 11844-2:2020 - Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2020)

Relations

• Replaces: EN ISO 11844-2:2008 - Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2005)
• Effective Date: 17-Jun-2020

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11844-2:2020
01-september-2020
Nadomešča:
SIST EN ISO 11844-2:2008
Korozija kovin in zlitin - Klasifikacija notranjih atmosfer z nizko korozivnostjo - 2.
del: Ugotavljanje napada korozije v zaprtih prostorih (ISO 11844-2:2020)
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres -
Part 2: Determination of corrosion attack in indoor atmospheres (ISO 11844-2:2020)
Korrosion von Metallen und Legierungen - Einteilung der Korrosivität in Räumen mit
geringer Korrosivität - Teil 2: Bestimmung der korrosiven Belastung in Räumen (ISO
11844-2:2020)
Corrosion des métaux et alliages - Classification de la corrosivité faible des atmosphères
d'intérieur - Partie 2: Détermination de l'attaque par corrosion dans les atmosphères
d'intérieur (ISO 11844-2:2020)
Ta slovenski standard je istoveten z: EN ISO 11844-2:2020
ICS:
77.060 Korozija kovin Corrosion of metals
SIST EN ISO 11844-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 11844-2:2020

---------------------- Page: 2 ----------------------
SIST EN ISO 11844-2:2020


EN ISO 11844-2
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2020
EUROPÄISCHE NORM
ICS 77.060 Supersedes EN ISO 11844-2:2008
English Version

Corrosion of metals and alloys - Classification of low
corrosivity of indoor atmospheres - Part 2: Determination
of corrosion attack in indoor atmospheres (ISO 11844-
2:2020)
Corrosion des métaux et alliages - Classification de la Korrosion von Metallen und Legierungen - Einteilung
corrosivité faible des atmosphères d'intérieur - Partie der Korrosivität in Räumen mit geringer Korrosivität -
2: Détermination de l'attaque par corrosion dans les Teil 2: Bestimmung der korrosiven Belastung in
atmosphères d'intérieur (ISO 11844-2:2020) Räumen (ISO 11844-2:2020)
This European Standard was approved by CEN on 26 April 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11844-2:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 11844-2:2020
EN ISO 11844-2:2020 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 11844-2:2020
EN ISO 11844-2:2020 (E)
European foreword
This document (EN ISO 11844-2:2020) has been prepared by Technical Committee ISO/TC 156
"Corrosion of metals and alloys" in collaboration with Technical Committee CEN/TC 262 “Metallic and
other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys”
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by December 2020, and conflicting national standards
shall be withdrawn at the latest by December 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11844-2:2008.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, I
...