prEN 13763-5

Explosives for civil uses - Detonators and detonating cord relays - Part 5: Determination of resistance to cutting damage of leading wires and shock tubes

This document specifies a method for determining the resistance to cutting damage of the plastic materials used in insulation of leading wires of electric detonators, electronic detonators and the tubing of shock tube for non-electric detonators and electronic detonators, when drawn over a sharp edge under specified loading conditions.
This document is applicable to explosives for civil uses.

Explosivstoffe für zivile Zwecke - Zünder und Sprengschnurverbinder - Teil 5: Bestimmung der Widerstandsfähigkeit von Zünderdrähten und Zündschläuchen gegen Schnittbelastung

Dieses Dokument legt ein Verfahren für die Bestimmung der Widerstandsfähigkeit des Kunststoffmaterials gegenüber Schnittkräften fest, das zur Isolierung von Zünderdrähten elektrischer Zünder und elektronischer Zünder und für Zündschläuche zur Verwendung mit nichtelektrischen Zündern und elektronischen Zündern verwendet wird, wenn sie unter festgelegten Belastungsbedingungen über eine scharfe Kante gezogen werden.
Dieses Dokument ist anzuwenden für Explosivstoffe für zivile Zwecke.

Explosifs à usage civil - Détonateurs et relais pour cordeau détonant - Partie 5 : Détermination de la résistance du fil d’amorce et du tube à transmission d’onde de choc aux dommages par coupes

Le présent document spécifie la méthode permettant de déterminer la résistance à la coupure des matériaux plastiques utilisés pour l’isolement des fils d’amorce des détonateurs électriques, électroniques et des tubes à transmission d’onde de choc des détonateurs non électriques et électroniques, lorsqu’ils passent sur une bordure de coupe dans des conditions de charge spécifiques.
Le présent document s’applique aux explosifs à usage civil.

Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 5. del: Ugotavljanje odpornosti vodnikov in detonacijskih cevk proti urezu

General Information

• Status: Not Published
• Publication Date: 29-May-2023
• ICS: 71.100.30 - Explosives. Pyrotechnics and fireworks
• Technical Committee: CEN/TC 321 - Explosives for civil uses
• Drafting Committee: CEN/TC 321/WG 4 - Detonators and relays
• Current Stage: 4599 - Dispatch of FV draft to CMC - Finalization for Vote
• Start Date: 15-Dec-2023
• Due Date: 24-Jul-2021
• Completion Date: 15-Dec-2023
• Directive: 2014/28/EU - Directive 2014/28/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market and supervision of explosives for civil uses
• Mandate: M/055 - Standardization mandate to CEN for explosives for civil uses
• Mandate: M/562 - Standardization Request on Explosives for civil use
• Ref Project: oSIST prEN 13763-5:2021 - Explosives for civil uses - Detonators and relays - Part 5: Determination of resistance to cutting damage of leading wires and shock tubes

Relations

• Revises: EN 13763-5:2003 - Explosives for civil uses - Detonators and relays - Part 5: Determination of resistance to cutting damage of leading wires and shock tubes
• Effective Date: 23-Oct-2019

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 13763-5:2021
01-april-2021
Eksplozivi za civilno uporabo – Detonatorji in zakasnilniki – 5. del: Ugotavljanje
odpornosti vodnikov in detonacijskih cevk proti urezu
Explosives for civil uses - Detonators and relays - Part 5: Determination of resistance to
cutting damage of leading wires and shock tubes
Explosivstoffe für zivile Zwecke - Zünder und Verzögerungselemente - Teil 5:
Bestimmung der Widerstandsfähigkeit von Zünderdrähten und Zündschläuchen gegen
Schnittbelastung
Explosifs à usage civil - Détonateurs et relais - Partie 5: Détermination de la résistance
du fil d'amorçage et du tube à transmission d'ondes de choc aux dommages par coupes
Ta slovenski standard je istoveten z: prEN 13763-5
ICS:
71.100.30 Eksplozivi. Pirotehnika in Explosives. Pyrotechnics and
ognjemeti fireworks
oSIST prEN 13763-5:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 13763-5:2021

---------------------- Page: 2 ----------------------
oSIST prEN 13763-5:2021


DRAFT
EUROPEAN STANDARD
prEN 13763-5
NORME EUROPÉENNE

EUROPÄISCHE NORM

April 2021
ICS 71.100.30 Will supersede EN 13763-5:2003
English Version

Explosives for civil uses - Detonators and detonating cord
relays - Part 5: Determination of resistance to cutting
damage of leading wires and shock tubes
Explosifs à usage civil - Détonateurs et relais - Partie 5: Explosivstoffe für zivile Zwecke - Zünder und
Détermination de la résistance du fil d'amorçage et du Sprengschnurverbinder - Teil 5: Bestimmung der
tube à transmission d'ondes de choc aux dommages Widerstandsfähigkeit von Zünderdrähten und
par coupes Zündschläuchen gegen Schnittbelastung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 321.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13763-5:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 13763-5:2021
prEN 13763-5:2021 (E)
Contents Page
European foreword . 3
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Principle . 6
5 Apparatus . 6
5.1 Cutting damage apparatus . 6
5.2 Imme
...