Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular (ISO 9100-5:2005)

ISO 9100-5:2005 specifies the dimensions of vacuum lug finishes with a nominal size of 43 mm and 48 mm regular for wide-mouth glass containers.

Glasbehälter - Vakuum-Nockenverschluss-Mündungen - Teil 5: 43 und 48 regular (ISO 9100-5:2005)

Récipients en verre - Bagues à crans pour bouchage sous vide - Partie 5: 43 et 48 regular (ISO 9100-5:2005)

L'ISO 9100-5:2005 spécifie les dimensions des bagues à crans pour bouchage sous vide de cote nominale 43 mm et 48 mm regular, destinées aux récipients en verre à col large.

Steklena embalaža – Grla za vakuumsko zapiranje - 5. del: 43 in 48, standardno (ISO 9100-5:2005)

General Information

Status
Published
Publication Date
14-Jan-2005
Current Stage
9093 - Decision to confirm - Review Enquiry
Start Date
23-Oct-2009
Completion Date
23-Oct-2009

Buy Standard

Standard
EN ISO 9100-5:2005
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 9100-5:2005
01-marec-2005
Steklena embalaža – Grla za vakuumsko zapiranje - 5. del: 43 in 48, standardno
(ISO 9100-5:2005)
Glass containers - Vacuum lug finishes - Part 5: 43 and 48 regular (ISO 9100-5:2005)
Glasbehälter - Vakuum-Nockenverschluss-Mündungen - Teil 5: 43 und 48 regular (ISO
9100-5:2005)
Récipients en verre - Bagues a crans pour bouchage sous vide - Partie 5: 43 et 48
regular (ISO 9100-5:2005)
Ta slovenski standard je istoveten z: EN ISO 9100-5:2005
ICS:
55.100 Steklenice. Lonci. Kozarci Bottles. Pots. Jars
SIST EN ISO 9100-5:2005 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 9100-5:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 9100-5:2005
EUROPEAN STANDARD
EN ISO 9100-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS 55.100
English version
Glass containers - Vacuum lug finishes - Part 5: 43 and 48
regular (ISO 9100-5:2005)
Récipients en verre - Bagues à crans pour bouchage sous Glasbehälter - Vakuum-Nockenverschluss-Mündungen -
vide - Partie 5: 43 et 48 regular (ISO 9100-5:2005) Teil 5: 43 und 48 regular (ISO 9100-5:2005)
This European Standard was approved by CEN on 23 September 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9100-5:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 9100-5:2005
EN ISO 9100-5:2005 (E)
Contents
Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Dimensions.4
Bibliography .8
2

---------------------- Page: 4 ----------------------

SIST EN ISO 9100-5:2005
EN ISO 9100-5:2005 (E)
Foreword
This document (EN ISO 9100-5:2005) has been prepared by Technical Committee CEN/TC 261 “Packaging”,
the secretariat of which is held by AFNOR, in collaboration with Technical Committee ISO/TC 63 “Glass
containers”.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by July 2005, and conflicting national standards shall be withdrawn at the
latest by July 2005.
Efficient packaging is of great importance for the distribution and the protection of goods. Insufficient or
inappropriate packaging can lead to damage or wastage of the contents of the pack.
1)
It is based on CE.T.I.E (International Technical Centre for Bottling and Packaging) data sheet
GME 20-03 : 1995.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.



1) Centre Technique International de l'Embouteillage (CETIE), 3, rue La
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.