Mobile access and working towers made of prefabricated elements - Part 2: Rules and guidelines for the preparation of an instruction manual

This document gives rules and guidelines for the preparation of instruction manuals for mobile access and working towers in accordance with EN 1004-1, Mobile access and working towers made of prefabricated elements - Part 1: Materials, dimensions, design loads, safety and performance requirements.
This document is intended for all parties involved in the preparation of instructions for use, for example: suppliers, technical writers, technical illustrators, translators or other people engaged in the work of conceiving and drafting such instructions for use.

Fahrbare Arbeitsbühnen - Teil 2: Regeln und Festlegungen für die Aufstellung einer Aufbau- und Verwendungsanleitung

Dieses Dokument enthält Regeln und Festlegungen für die Aufstellung von Aufbau- und Verwendungs-anleitungen für fahrbare Arbeitsbühnen nach EN 1004 1, „Fahrbare Arbeitsbühnen aus vorgefertigten Bauteilen — Teil 1: Werkstoffe, Maße, Lastannahmen und sicherheitstechnische Anforderungen“.
Dieses Dokument ist für alle an der Bearbeitung von Aufbau- und Verwendungsanleitungen Beteiligten vorgesehen, zum Beispiel: Lieferanten, technische Autoren, technische Zeichner, Übersetzer und andere Personen, die an der Planung und Erstellung solcher Aufbau- und Verwendungsanleitungen mitarbeiten.

Échafaudages roulants en éléments préfabriqués - Partie 2 : Règles et lignes directrices pour la préparation d’un manuel d’instructions

Le présent document fournit des règles et des lignes directrices pour la préparation des manuels d’instructions pour les échafaudages roulants conformes à l’EN 1004-1, Échafaudages roulants en éléments préfabriqués - Partie 1 : Matériaux, dimensions, charges de calcul, exigences de sécurité et de performance.
Le présent document est destiné à toutes les parties impliquées dans la préparation de notices d’utilisation, par exemple fournisseurs, rédacteurs techniques, illustrateurs techniques, traducteurs ou autres personnes engagées dans les travaux d’élaboration et de rédaction de ces notices d’utilisation.

Pomični delovni odri na kolesih iz predizdelanih tipskih elementov - 2. del: Pravila in smernice za pripravo navodil za montažo in uporabo

Ta evropski standard podaja pravila in smernice za pripravo navodil za montažo ter uporabo pomičnih delovnih odrov na kolesih v skladu s standardom EN 1004.
Ta standard je namenjen vsem stranem, vključenim v pripravo navodil za uporabo, na primer: dobaviteljem, tehničnim piscem, tehničnim ilustratorjem, prevajalcem ali drugim osebam, vključenim v delo na področju zasnove in priprave takšnih navodil za uporabo.

General Information

Status
Published
Publication Date
23-Nov-2021
Withdrawal Date
30-May-2022
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
24-Nov-2021
Due Date
05-Aug-2022
Completion Date
24-Nov-2021

Relations

Buy Standard

Standard
EN 1004-2:2022 - BARVE
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 1004-2:2020 - BARVE
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1004-2:2022
01-januar-2022
Nadomešča:
SIST EN 1298:2000
Pomični delovni odri na kolesih iz predizdelanih tipskih elementov - 2. del: Pravila
in smernice za pripravo navodil za montažo in uporabo
Mobile access and working towers made of prefabricated elements - Part 2: Rules and
guidelines for the preparation of an instruction manual
Fahrbare Arbeitsbühnen - Regeln und Festlegungen für die Aufstellung einer Aufbau-
und Verwendungsanleitung
Échafaudages roulants en éléments préfabriqués - Partie 2 : Règles et lignes directrices
pour la préparation d’un manuel d’instructions
Ta slovenski standard je istoveten z: EN 1004-2:2021
ICS:
91.220 Gradbena oprema Construction equipment
SIST EN 1004-2:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 1004-2:2022

---------------------- Page: 2 ----------------------
SIST EN 1004-2:2022


EN 1004-2
EUROPEAN STANDARD

NORME EUROPÉENNE

November 2021
EUROPÄISCHE NORM
ICS 91.220 Supersedes EN 1298:1996
English Version

Mobile access and working towers made of prefabricated
elements - Part 2: Rules and guidelines for the preparation
of an instruction manual
Échafaudages roulants en éléments préfabriqués - Fahrbare Arbeitsbühnen - Regeln und Festlegungen für
Partie 2 : Règles et lignes directrices pour la die Aufstellung einer Aufbau- und
préparation d'un manuel d'instructions Verwendungsanleitung
This European Standard was approved by CEN on 13 September 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1004-2:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 1004-2:2022
EN 1004-2:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General . 5
4.1 Basic requirements . 5
4.2 Risk Assessment. 5
4.3 Principal Guidelines . 6
5 Identification of components in the structure . 6
6 Assembly, alteration and dismantling . 6
7 Stability . 8
8 Application and moving .
...

SLOVENSKI STANDARD
oSIST prEN 1004-2:2020
01-november-2020
Pomični delovni odri na kolesih iz predizdelanih tipskih elementov - 2. del: Pravila
in smernice za pripravo navodil za montažo in uporabo
Mobile access and working towers made of prefabricated elements - Part 2: Rules and
guidelines for the preparation of an instruction manual
Fahrbare Arbeitsbühnen - Teil 2: Regeln und Festlegungen für die Aufstellung einer
Aufbau- und Verwendungsanleitung
Échafaudages roulants en éléments préfabriqués - Partie 2 : Règles et lignes directrices
pour la préparation d’un manuel d’instructions
Ta slovenski standard je istoveten z: prEN 1004-2
ICS:
91.220 Gradbena oprema Construction equipment
oSIST prEN 1004-2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 1004-2:2020

---------------------- Page: 2 ----------------------
oSIST prEN 1004-2:2020


DRAFT
EUROPEAN STANDARD
prEN 1004-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

September 2020
ICS 91.220 Will supersede EN 1298:1996
English Version

Mobile access and working towers made of prefabricated
elements - Part 2: Rules and guidelines for the preparation
of an instruction manual
Echafaudages roulants de service - Règles et grandes Fahrbare Arbeitsbühnen - Teil 2: Regeln und
lignes pour la préparation d'un manuel d'opération Festlegungen für die Aufstellung einer Aufbau- und
Verwendungsanleitung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 53.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 1004-2:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 1004-2:2020
prEN 1004-2:2020 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 General . 5
5 Identification of components in the structure . 6
6 Assembly, alteration and dismantling . 6
7 Stability . 8
8 Application and moving . 8
9 Inspection, care and maintenance .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.