EN 13604:2013

Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper

This European Standard specifies the composition, property requirements including electrical properties and tolerances on dimensions and form of semiconductor devices, electronic and vacuum products in two copper grates Cu-OFE (CW009A) and Cu-PHCE (CW022A), in the form of wrought products, e.g. plate, sheet, strip, seamless tube, rod, bar, wire, profiles.
The sampling procedures, the methods of test for verification of conformity to the requirements of this European Standard, and the delivery conditions are also specified.
This European Standard applies to the wrought copper products as delivered to the device manufacturer, i.e. for further fabrication.

Kupfer und Kupferlegierungen - Produkte aus hochleitfähigem Kupfer für Elektronenröhren, Halbleiterbauelemente und für die Anwendung in der Vakuumtechnik

Diese Europäische Norm legt die Zusammensetzung, die Anforderungen an die Eigenschaften, einschließlich elektrische Eigenschaften, Grenzabmaße und Formtoleranzen der zwei Kupfersorten Cu-OFE (CW009A) und Cu-PHCE (CW022A), für die Anwendung in der Elektronik, als Halbleiterbauelemente und für die Vakuumtechnik fest, und zwar als Produkte, die durch plastisches Umformen hergestellt wurden, z. B. Platten, Bleche, Bänder, nahtlose Rohre, Stangen, Drähte und Profile.
Der Ablauf der Probenentnahme, die Prüfverfahren zur Feststellung der Übereinstimmung mit den Anforderungen dieser Europäischen Norm und die Lieferbedingungen sind ebenfalls festgelegt.
Diese Europäische Norm gilt für Produkte aus Kupfer, die durch plastisches Umformen hergestellt wurden, so wie sie an die Hersteller von Bauteilen geliefert werden, d. h. zur weiteren Bearbeitung.

Cuivre et alliages de cuivre - Produits en cuivre de haute conductivité pour application dans les tubes électroniques, semi-conducteurs et vide

La présente Norme européenne spécifie la composition, les caractéristiques, y compris les caractéristiques électriques et les tolérances de dimensions et de forme des dispositifs semi-conducteurs et des produits électroniques et sous vide fabriqués dans deux nuances de cuivre Cu-OFE (CW009A) et Cu-PHCE (CW022A), se présentant sous la forme de produits corroyés, par exemple plaque, tôle, bande, tube sans soudure, barre, fil, profilés.
Les procédures d'échantillonnage, les méthodes d'essai pour la vérification de la conformité aux exigences de la présente norme et les conditions de livraison sont également spécifiées.
La présente Norme européenne s'applique aux produits en cuivre corroyé tels qu'ils sont livrés au fabricant du dispositif, à savoir pour toute fabrication ultérieure.

Baker in bakrove zlitine – Izdelki iz visoko prevodnega bakra za elektronske cevi, polprevodniške sklope in uporabo v vakuumu

Ta evropski standard določa sestavo, zahteve glede značilnosti, vključno z električnimi lastnostmi, ter odstopanja glede dimenzij in oblike za elektronske cevi, polprevodniške sklope in uporabo v vakuumu v bakrenih rešetkah Cu-OFE (CW009A) in Cu-PHCE (CW022A) v obliki gnetenih izdelkov, kot so plošče, ponjave, trakovi, nevarjene cevi, drogovi, palice, žice in profili. Določeni so tudi postopki vzorčenja, preskusne metode za preverjanje skladnosti z zahtevami tega evropskega standarda in dobavni pogoji. Ta evropski standard velja za gnetene bakrene izdelke, ki so dostavljeni proizvajalcu naprav, tj. za nadaljnjo proizvodnjo.

General Information

• Status: Published
• Publication Date: 18-Jun-2013
• Withdrawal Date: 30-Dec-2013
• ICS: 77.150.30 - Copper products
• Technical Committee: CEN/TC 133 - Copper and copper alloys
• Drafting Committee: CEN/TC 133/WG 4 - Extruded and drawn products, forgings and scrap
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Jul-2024
• Completion Date: 15-Jul-2024
• Ref Project: SIST EN 13604:2013 - Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper

Relations

• Replaces: EN 13604:2002 - Copper and copper alloys - Products of high conductivity copper for electronic tubes, semiconductor devices and vacuum applications
• Effective Date: 26-Jun-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Baker in bakrove zlitine – Izdelki iz visoko prevodnega bakra za elektronske cevi, polprevodniške sklope in uporabo v vakuumuCopper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper77.150.30Bakreni izdelkiCopper productsICS:Ta slovenski standard je istoveten z:EN 13604:2013SIST EN 13604:2013en,de01-september-2013SIST EN 13604:2013SLOVENSKI
STANDARDSIST EN 13604:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13604
June 2013 ICS 77.150.30 Supersedes EN 13604:2002English Version
Copper and copper alloys - Semiconductor devices, electronic and vacuum products made from high conductivity copper
Cuivre et alliages de cuivre - Produits en cuivre de haute conductivité pour application dans les tubes électroniques, semi-conducteurs et vide
Kupfer und Kupferlegierungen - Produkte aus hochleitfähigem Kupfer für Elektronenröhren, Halbleiterbauelemente und für die Anwendung in der Vakuumtechnik This European Standard was approved by CEN on 25 April 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13604:2013: ESIST EN 13604:2013

Reference chart for microscopic examination at magnification 100× . 15 Annex B (informative)
Characteristics of coppers for electrical purposes . 16 Bibliography . 18 Figures Figure A.1 — Reference chart for microscopic examination at magnification 100× . 15 Tables Table 1 — Composition of Cu-OFE and Cu-PHCE . 13 Table 2 — Electrical properties (at 20 °C) . 14 Table B.1 — Particular characteristics of coppers for electrical purposes . 17 SIST EN 13604:2013
...