EN 14959:2006

Touch and close fasteners - Determination of resistance to fraying after washing

This European Standard specifies a method for determining the resistance to fraying of touch and close fasteners.

Haftverschlüsse - Bestimmung der Kantenschnittfestigkeit nach dem Waschen

Diese Europäische Norm legt ein Verfahren zur Bestimmung der Kantenschnittfestigkeit von Haftverschlüssen fest.

Fermetures auto-agrippantes - Détermination de la résistance à l'effilochage après lavage

Sprijemna zapenjala – Ugotavljanje odpornosti proti obrabi po pranju

General Information

• Status: Published
• Publication Date: 14-Feb-2006
• Withdrawal Date: 30-Aug-2006
• ICS: 61.040 - Headgear. Clothing accessories. Fastening of clothing
• Technical Committee: CEN/TC 248 - Textiles and textile products
• Drafting Committee: CEN/TC 248/WG 5 - Touch and close fasteners
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 17-Oct-2022
• Ref Project: SIST EN 14959:2006 - Touch and close fasteners - Determination of resistance to fraying after washing

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2006
Sprijemna zapenjala – Ugotavljanje odpornosti proti obrabi po pranju
Touch and close fasteners - Determination of resistance to fraying after washing
Haftverschlüsse - Bestimmung der Kantenschnittfestigkeit nach dem Waschen
Fermetures auto-agrippantes - Détermination de la résistance a l'effilochage apres
lavage
Ta slovenski standard je istoveten z: EN 14959:2006
ICS:
61.040 3RNULYDOD'RGDWNLN Headgear. Clothing
REODþLORP6SHQMDQMHREODþLO accessories. Fastening of
clothing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 14959
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2006
ICS 61.040
English Version
Touch and close fasteners - Determination of resistance to
fraying after washing
Fermetures auto-agrippantes - Détermination de la Haftverschlüsse - Bestimmung der Kantenschnittfestigkeit
résistance à l'effilochage après lavage nach dem Waschen
This European Standard was approved by CEN on 30 December 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14959:2006: E
worldwide for CEN national Members.

Contents Page
Foreword.3
1 Scope .4
2 Normative references .4
3 Principle.4
4 Apparatus .4
5 Test specimen.4
6 Conditioning.5
7 Procedure .5
8 Test report .5
Bibliography .9

Foreword
This European Standard (EN 14959:2006) has been prepared by Technical Committee CEN/TC 248 “Textiles
and textile products”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2006, and conflicting national standards shall be withdrawn at
the latest by August 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.

1 Scope
This European Standard specifies a method for determining the resistance to fraying of touch and close
fasteners.
2 Normative references
The following referenced documents are indispensable for the application of this European Standard. For
dated references, only the edition cited applies. For undated references, the latest edition of the referenced
document (includin
...