Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005)

ISO 139:2005 defines the characteristics and use of a standard atmosphere for conditioning, for determining the physical and mechanical properties of textiles and a standard alternative atmosphere that may be used if agreed between parties.

Textilien - Normalklimate für die Probenvorbereitung und Prüfung (ISO 139:2005)

Diese Internationale Norm definiert die Kenngrößen und die Verwendung eines Normalklimas für die Probenvorbereitung und für die Bestimmung der physikalischen und mechanischen Eigenschaften von Textilien sowie ein alternatives Normalklima, das, sofern zwischen den Parteien vereinbart, verwendet werden kann.

Textiles - Atmosphères normales de conditionnement et d'essai (ISO 139:2005)

L'ISO 139:2005 définit les caractéristiques et l'utilisation d'une atmosphère normale pour le conditionnement et la détermination des propriétés physiques et mécaniques des textiles ainsi qu'une autre atmosphère normale pouvant être utilisée si les parties concernées sont d'accord.

Tekstilije - Standardni klimatski pogoji za klimatiziranje in preskušanje (ISO 139:2005)

Ta mednarodni standard določa značilnosti in uporabo standardnih klimatskih pogojev za klimatiziranje in ugotavljanje fizikalnih in mehanskih lastnosti tekstilij ter značilnosti in uporabo standardnih alternativnih klimatskih pogojev, ki jih je mogoče uporabiti po dogovoru med strankami.

General Information

Status
Published
Publication Date
14-Jan-2005
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
02-Jul-2010

RELATIONS

Buy Standard

Standard
EN ISO 139:2005
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 139:2005
01-maj-2005
1DGRPHãþD
SIST EN 20139:1999
Tekstilije - Standardni klimatski pogoji za klimatiziranje in preskušanje (ISO
139:2005)
Textiles - Standard atmospheres for conditioning and testing (ISO 139:2005)
Textilien - Normalklimate für die Probenvorbereitung und Prüfung (ISO 139:2005)
Textiles - Atmospheres normales de conditionnement et d'essai (ISO 139:2005)
Ta slovenski standard je istoveten z: EN ISO 139:2005
ICS:
59.080.01 Tekstilije na splošno Textiles in general
SIST EN ISO 139:2005 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 139:2005
---------------------- Page: 2 ----------------------
SIST EN ISO 139:2005
EUROPEAN STANDARD
EN ISO 139
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2005
ICS 59.080.01 Supersedes EN 20139:1992
English version
Textiles - Standard atmospheres for conditioning and testing
(ISO 139:2005)

Textiles - Atmosphères normales de conditionnement et Textilien - Normalklimate für die Probenvorbereitung und

d'essai (ISO 139:2005) Prüfung (ISO 139:2005)
This European Standard was approved by CEN on 10 December 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,

Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 139:2005: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 139:2005
EN ISO 139:2005 (E)
Foreword

This document (EN ISO 139:2005) has been prepared by Technical Committee ISO/TC 38

"Textiles" in collaboration with Technical Committee CEN/TC 248 "Textiles and textile products",

the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of

an identical text or by endorsement, at the latest by July 2005, and conflicting national standards

shall be withdrawn at the latest by July 2005.
This document supersedes EN 20139:1992.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of

the following countries are bound to implement this European Standard: Austria, Belgium,

Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,

Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 139:2005 has been approved by CEN as EN ISO 139:2005 without any
modifications.
---------------------- Page: 4 ----------------------
SIST EN ISO 139:2005
INTERNATIONAL ISO
STANDARD 139
Second edition
2005-01-15
Textiles — Standard atmospheres for
conditioning and testing
Textiles — Atmosphères normales de conditionnement et d'essai
Reference number
ISO 139:2005(E)
ISO 2005
---------------------- Page: 5 ----------------------
SIST EN ISO 139:2005
ISO 139:2005(E)
PDF disclaimer

This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall

not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In

downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat

accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.

Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation

parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the

unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

© ISO 2005

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or

ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii ISO 2005 – All rights reserved
---------------------- Page: 6 ----------------------
SIST EN ISO 139:2005
ISO 139:2005(E)
Contents Page

1 Scope .................................................................................................................................................... 1

2 Terms and definitions .......................................................................................................................... 1

3 Requirements ....................................................................................................................................... 2

4 Apparatus ............................................................................................................................................. 2

5 Procedures ........................................................................................................................................... 2

6 Test report ............................................................................................................................................ 3

Annex A (normative) Control of standard atmosphere ............................................................................. 4

Annex B (informative) Tolerance zone ........................................................................................................ 5

Bibliography ................................................................................................................................................. 6

ISO 2005 – All rights reserved iii
---------------------- Page: 7 ----------------------
SIST EN ISO 139:2005
ISO 139:2005(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International

Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO139 was prepared by Technical Committee ISO/TC 38, Textiles, Subcommittee SC24, Conditioning

atmospheres and physical tests for textile fabrics.

This second edition cancels and replaces the first edition (ISO 139:1973), which has been technically revised,

specifically by including the allowances for the uncertainty of the measurement in the overall tolerances for

temperature and relative humidity.
iv ISO 2005 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 139:2005
ISO 139:2005(E)
Introduction

The tolerances for temperature and relative humidity given in ISO 139:1973 were the tolerances for the

temperature and relative humidity measured
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.