EN 957-6:2010/FprA1
(Amendment)Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods
Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods
This European Standard amends and supplements EN 957-1. The requirements of this specific standard take precedence over those in EN 957-1.
This document is a type C standard as stated in ISO 12100.
The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this document.
When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard.
Stationäre Trainingsgeräte - Teil 6: Laufbänder, zusätzliche besondere sicherheitstechnische Anforderungen und Prüfverfahren
Appareils d'entraînement fixes - Partie 6: Tapis de course, méthodes d'essai et exigences de sécurité spécifiques supplémentaires
Nepremična oprema za vadbo - 6. del: Tekoče preproge, dodatne posebne varnostne zahteve in preskusne metode
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2013
1HSUHPLþQDRSUHPD]DYDGERGHO 7HNRþHSUHSURJHGRGDWQHSRVHEQH
YDUQRVWQH]DKWHYHLQSUHVNXVQHPHWRGH
Stationary training equipment - Part 6: Treadmills, additional specific safety requirements
and test methods
Stationäre Trainingsgeräte - Teil 6: Laufbänder, zusätzliche besondere
sicherheitstechnische Anforderungen und Prüfverfahren
Appareils d'entraînement fixes - Partie 6: Tapis de course, méthodes d'essai et
exigences de sécurité spécifiques supplémentaires
Ta slovenski standard je istoveten z: EN 957-6:2010/FprA1
ICS:
97.220.30 Oprema za dvoranske športe Indoor sports equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 957-6:2010
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
September 2013
ICS 97.220.30
English Version
Stationary training equipment - Part 6: Treadmills, additional
specific safety requirements and test methods
Appareils d'entraînement fixes - Partie 6: Tapis de course, Stationäre Trainingsgeräte - Teil 6: Laufbänder, zusätzliche
méthodes d'essai et exigences de sécurité spécifiques besondere sicherheitstechnische Anforderungen und
supplémentaires Prüfverfahren
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 136.
This draft amendment A1, if approved, will modify the European Standard EN 957-6:2010. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 957-6:2010/FprA1:2013: E
worldwide for CEN national Members.
Contents Page
Foreword . 4
1 Modification to the Foreword . 5
2 Modification to the Introduction . 5
3 Modification to the Scope . 5
4 Modifications to Clause 2 "Normative references" . 6
5 Modification to 3.5 "side handrail" . 6
6 Addition of new Clause 4 "List of significant hazards" . 6
7 Modifications to Clause 5 "Safety requirements" . 8
8 Modifications to 5.2 "Transmission elements and rotating parts" . 8
9 Modification to 5.3 "Temperature rise" . 8
10 Modifications to 5.4 " Safety stop" . 8
11 Modification to 5.5 " Immobilization method" . 9
12 Modification to 5.6 "Stability" . 9
13 Modification to 5.7 "Static loading" . 9
14 Modifications to 5.8 "Endurance" . 9
15 Modification to 5.9.2 "Treadmills with side handrails only" . 9
16 Modifications to 5.9.3 "Treadmills with front handlebar and side handrails". 9
17 Modifications to 5.10 "Foot rails" . 9
18 Modification to 5.11 "Running surface" . 10
19 Modification to 5.12 "Acceleration" . 10
20 Modification to 5.13 "Heart rate control mode" . 10
21 Modifications to 5.14 "Folding treadmills" . 10
22 Modifications to 5.15 "Electrical safety" . 10
23 Add a new subclause 6.16 "Noise" . 11
24 Modifications to 5.16 "Additional classified requirements" . 11
25 Modification to 5.17 "Additional warning label" . 11
26 Modification to Clause 6 "Test methods" . 11
27 Modifications to 6.1 "Testing of transmission elements and rotation parts" . 11
28 Modification to 6.2 "Testing of temperature rise" . 12
29 Modification to 6.3 "Testing of the safety stop" . 12
30 Modifications to 6.4 " Testing of the actuator(s)" . 12
31 Modification to 6.5 "Testing of immobilization method" . 12
32 Modifications to 6.6.1 "Test in training position" . 12
33 Modification to 6.6.2 "Test in folded position" . 12
34 Addition of new subclause 7.6.3 "Test of the footrail support system" . 12
35 Modifications to 6.7 "Load testing" .1 3
36 Modification to 6.8.1 "Requirement for the test apparatus . 13
37 Modifications to 6.8.2 "Test method" .1 3
38 Modification to 6.9 "Testing of side handrails/front handlebar" . 14
39 Modifications to 6.10 "Testing of foot rails" .1 4
40 Modification to 6.11 "Testing of the running surface" .1 4
41 Modifications to 6.13 "Testing of the heart rate control mode" . 14
42 Modification to 6.14.1 "Testing of inadvertent release when packaged" . 14
43 Modification to 6.14.2 "For treadmill where the running surface is designed to be folded
up when stored .1 4
44 Modification to 6.14.3 "For treadmill where the console is designed to be folded down
when stored" .1 5
45 Modification to 6.14.4 "Testing the maximum handling force" . 15
46 Modification to 6.15 "Testing of the accuracy of time, speed and distance" . 15
47 Addition of a new subclause 7.16 "Noise testing" .1 5
48 Modification to Clause 7 "Test report" .1 5
49 Addition of new Clause 9 "Marking".1 6
50 Modifications to Clause 8 "Additional instructions for use" . 16
51 Addition of an Annex ZA .1 7
52 Modifications to the Bibliography . 18
Foreword
This document (EN 957-6:2010/FprA1:2013) has been prepared by Technical Committee CEN/TC 136
“Sports, playground and other recreational facilities and equipment”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2001/95/EC and
EU Directive 2006/42/EC.
For relationship with EU Directive 2006/42/EC, see informative Annex ZA, which is an integral part of this
document.
1 Modification to the Foreword
Add the following text after the third paragraph:
"This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2001/95/EC and
EU Directive 2006/42/EC.
For relationship with EU Directives 2006/42/EC, see informative Annex ZA which is an integral part of this
document."
2 Modification to the Introduction
Replace the text with the following:
"This European Standard amends and supplements EN 957-1. The requirements of this specific standard take
precedence over those in EN 957-1.
This document is a type C standard as stated in ISO 12100.
The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are
covered are indicated in the scope of this document.
When provisions of this type C standard are different from those which are stated in type A or B standards, the
provisions of this type C standard take precedence over the provisions of the other standards, for machines
that have been designed and built according to the provisions of this type C standard."
3 Modification to the Scope
Replace the text with the following:
"This European Standard specifies safety requirements and test methods for treadmills in addition to the
general safety requirements and test methods of EN 957-1. It is intended that EN 957-6 is applied together
with EN 957-1.
This part of EN 957 deals with significant hazards, hazardous situations and events relevant to stationary
training equipment used as intended and under the conditions of misuse foreseeable by the manufacturer
(see Clause 4).
EN 957-6 is applicable to power-driven as well as to non-power/manually driven training equipment type
treadmills (hereafter referred to as treadmills) with the classes S, H and I and classes A, B and C regarding
accuracy.
This document is not applicable to treadmills which are manufactured before the date of its publication as a
European Standard."
4 Modifications to Clause 2 "Normative references"
Replace the first paragraph with the following one:
"The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated references,
the latest edition of the referenced document (including any amendments) applies."
Add the following references:
"EN ISO 11201, Acoustics — Noise emitted by machinery and equipment — Determination of emission sound
pressure levels at a work station and at other specified positions in an essentially free field over a reflecting
plane with negligible environmental corrections (ISO 11201)
EN ISO 11202, Acoustics — Noise emitted by machinery and equipment — Determination of emission sound
pressure levels at a work station and at other specified positions applying approximate environmental
corrections (ISO 11202)
EN ISO 12100, Safety of machinery — General principles for design — Risk assessment and risk reduction
(ISO 12100)"
5 M
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.