EN 13354:2008

Solid wood panels (SWP) - Bonding quality - Test method

This European Standard specifies a test method for determining the bonding quality of single-layer and multi-layer solid wood panels by a shear test.

Massivholzplatten (SWP) - Qualität der Verklebung - Prüfverfahren

Diese Europäische Norm legt ein Prüfverfahren zur Bestimmung der Qualität der Verklebung von einlagigen
und mehrlagigen Massivholzplatten mit Hilfe einer Scherprüfung fest..

Bois panneautés (SWP) - Qualité du collage - Méthode d'essai

La présente norme européenne prescrit une méthode d’essai pour déterminer la qualité du collage des bois panneautés monocouche et multicouches au moyen d’un essai de cisaillement.

Masivne lesne plošče - Kakovost zlepljenosti - Preskusna metoda

General Information

• Status: Published
• Publication Date: 18-Nov-2008
• ICS: 79.060.99 - Other wood-based panels
• Technical Committee: CEN/TC 112 - Woodbased panels
• Drafting Committee: CEN/TC 112/WG 9 - Solid wood panels
• Current Stage: 9060 - Closure of 2 Year Review Enquiry - Review Enquiry
• Start Date: 02-Dec-2024
• Completion Date: 02-Dec-2024
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13354:2009 - Solid wood panels - Bonding quality - Test method

Relations

• Replaces: CEN/TS 13354:2003 - Solid wood panels - Bonding quality - Test method
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Massivholzplatten - Qualität der Verklebung - PrüfverfahrenBois panneautés - Qualité du collage - Méthode d'essaiSolid wood panels - Bonding quality - Test method79.060.99Other wood-based panelsICS:Ta slovenski standard je istoveten z:EN 13354:2008SIST EN 13354:2009en,fr,de01-april-2009SIST EN 13354:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13354November 2008ICS 79.060.99Supersedes CEN/TS 13354:2003
English VersionSolid wood panels (SWP) - Bonding quality - Test methodBois panneautés (SWP) - Qualité du collage - Méthoded'essaiMassivholzplatten (SWP) - Qualität der Verklebung -PrüfverfahrenThis European Standard was approved by CEN on 18 October 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13354:2008: ESIST EN 13354:2009

Compared to CEN/TS 13354:2003 the following changes have been made: a) deliverability changed from CEN/TS to EN; b) vacuum impregnation in 6.1 deleted. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 314-1, Plywood — Bonding quality — Part 1: Test methods EN 326-1, Wood-based panels — Sampling, cutting and inspection — Part 1: Sampling and cutting of test pieces and expression of test results EN 1995-1-1, Eurocode 5 — Design of timber structures — Part 1-1: General — Common rules and rules for buildings EN 13353, Solid wood panels (SWP) — Requirements 3 Principle Test pieces of single and multi-layer solid wood panels are
...