EN ISO 11908:1998
(Main)Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996)
Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996)
Describes general test methods for amino resins and solutions of amino resins intended for use as binders in paints, varnishes and related products.
Bindemittel für Beschichtungsstoffe - Aminharze - Allgemeine Prüfverfahren (ISO 11908:1996)
Diese internationale Norm behandelt allgemeine Prüfverfahren für Aminharze und Lösungen von Aminharzen, die als Bindemittel für Lacke, Anstrichstoffe und ähnliche Produkte verwendet werden.
Liants pour peintures et vernis - Résines aminoplastes - Méthodes générales d'essai (ISO 11908:1996)
L'IEC 62320-3:2015 spécifie les exigences minimales d'exploitation et de performances, les méthodes d'essai et les résultats exigibles pour les stations de répéteurs SIA conformes aux normes de performances adoptées par l'Annexe 3 de la Résolution MSC.74 (69) de l'OMI, SIA universel. Elle intègre les caractéristiques techniques des systèmes SIA de station fixe non embarquée, incluses dans la Recommandation UIT-R M.1371 et la Recommandation IALA A-124. Le cas échéant, elle tient compte également des réglementations de radiodiffusion de l'UIT. La présente norme s'appuie sur d'autres Normes internationales de l'IEC associées et sur des normes nationales existantes, selon le cas.
La présente norme s'applique aux stations de répéteurs SIA. Elle n'inclut pas les spécifications pour l'affichage des données SIA à terre.
Veziva za barve in lake - Amino smole - Splošne metode preskušanja (ISO 11908:1996)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Veziva za barve in lake - Amino smole - Splošne metode preskušanja (ISO 11908:1996)Bindemittel für Beschichtungsstoffe - Aminharze - Allgemeine Prüfverfahren (ISO 11908:1996)Liants pour peintures et vernis - Résines aminoplastes - Méthodes générales d'essai (ISO 11908:1996)Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:1996)87.060.20VezivaBindersICS:Ta slovenski standard je istoveten z:EN ISO 11908:1998SIST EN ISO 11908:1998en01-avgust-1998SIST EN ISO 11908:1998SLOVENSKI
STANDARD
SIST EN ISO 11908:1998
SIST EN ISO 11908:1998
SIST EN ISO 11908:1998
SIST EN ISO 11908:1998
SIST EN ISO 11908:1998
INTERNATIONAL STANDARD IS0 11908 First edition 1996-06-01 Binders for paints and varnishes - Amino resins - General methods of test Liants pour peintures et vernis - R&ines aminoplastes - M&hodes g&Wales d ‘essai Reference number IS0 11908:1996(E) SIST EN ISO 11908:1998
IS0 11908:1996(E) Foreword IS0 (the International Organization for Standardization) is a worldwide fed- eration of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through technical committees. Each member body interested in a subject which a technical committee has been established has the right to be resented on that committee. International organizations, governmental non-governmental, in liaison with ISO, also take part in the work. IS0 laborates closely with the International Electrotechnical Commission ( on all matters of electrotechnical standardization. IS0 for rep- and col- EC) Draft International Standards adopted by the technical committees are cir- culated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 11908 was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 10, Test methods for binders for paints and varnishes. Annex A forms an integral part of this International Standard. 0 IS0 1996 All rights reserved. Unless otherwise specified, no part of this publication may be repro- duced or utilized in any form or by any means, electronic or mechanical, including photo- copying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1211 Geneve 20 l Switzerland Printed in Switzerland ii SIST EN ISO 11908:1998
INTERNATIONAL STANDARD @ IS0 IS0 11908:1996(E) Binders for paints and varnishes - Amino resins - General methods of test 1 Scope This International Standard details general test meth- ods for amino resins and solutions of amino resins in- tended for use as binders in paints, varnishes and related products. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this International Standard. At the time of publication, the editions indicated were valid. All standards are subject to revision, and parties to agreements based on this International Standard are encouraged to in- vestigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and IS0 maintain registers of currently valid In- ternational Standards. IS0 842: I 984, Raw materials for paints and var- nishes - Sampling. IS0 1523:1983, Paints, varnishes, petroleum and re- lated products - Determination of flashpoint - Closed cup equilibrium method. IS0 2811 :I 974, Paints and varnishes - Determination of density. IS0 3219:1993, Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Deter- mina tion of viscosity using a rotational viscometer with defined shear rate IS0 3251 :I 993, Paints and varnishes - Determination of non-volatile matter of paints, varnishes and binders for paints and varnishes. IS0 3679:1983, Paints, varnishes, petroleum and re- la ted products - Determination of flashpoin t - Rapid equilibrium method. IS0 3682: 1996, Binders for paints and varnishes - Determination of acid value - Titrimetric method. IS0 4630: 1981, Binders for paints and varnishes - Estimation of colour of clear liquids by the Gardner colour scale. IS0 6271: 1981, Clear liquids - Estimation of colour by the platinum-cobalt scale. IS0 9020: 1994, Binders for paints and varnishes - Determination of free-formaldehyde content of amino resins - Sodium sulfite titrime tric method. 3 Definition For the purposes of this International Standard, the following definition applies. 3.1 amino resin: Synthetic resin resulting from the condensation of melamine or urea or their derivatives such as benzoguanamine with formaldehyde. These resins are often etherified with alcohols. 4 Properties and test methods Unless otherwise agreed, the properties to be measured and the test methods to be used shall be as give
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.