EN 12132-2:1998/A1:2003
(Amendment)Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test
Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test
Modify the table on filling of the test cushion.
Federn und Daunen - Verfahren für die Prüfung der Daunendichtigkeit von Geweben - Teil 2: Stoßprüfung
Plumes et duvets - Méthodes d'essai des tissus pour l'étanchéité aux plumes et duvets - Partie 2: Essai par impact
Feather and down - Methods of testing the down proof properties of fabrics - Part 2: Impact test
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2004
Feather and down - Methods of testing the down proof properties of fabrics - Part
2: Impact test
Feather and down - Methods of testing the down proof properties of fabrics - Part 2:
Impact test
Federn und Daunen - Verfahren für die Prüfung der Daunendichtigkeit von Geweben -
Teil 2: Stoßprüfung
Plumes et duvets - Méthodes d'essai des tissus pour l'étanchéité aux plumes et duvets -
Partie 2: Essai par impact
Ta slovenski standard je istoveten z: EN 12132-2:1998/A1:2003
ICS:
59.040 Pomožni materiali za tekstilije Textile auxiliary materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 12132-2:1998/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2003
ICS 59.040
English version
Feather and down - Methods of testing the down proof
properties of fabrics - Part 2: Impact test
Plumes et duvets - Méthodes d'essai de l'étanchéité des Federn und Daunen - Verfahren für die Prüfung der
tissus aux plumes et aux duvets - Partie 2: Essai d'impact Daunendichtigkeit von Geweben - Teil 2: Stoßprüfung
This amendment A1 modifies the European Standard EN 12132-2:1998; it was approved by CEN on 27 June 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.