EN 13855-1:2003

Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotation

This part 1 specifies a test method by rotation to evaluate the durability of cushions solely filled with feathers and/or down.
This standard applies to:
¾ back cushions;
¾ seating cushions;
¾ armrest cushions.

Fertigartikel gefüllt mit Federn und Daunen - Messung der Dicke und Kompressibilität von Kissen - Teil 1: Rotationsprüfverfahren

Der vorliegende Teil 1 legt ein Rotationsprüfverfahren zur Beurteilung des Dickenverlustes und der Härteveränderung von Kissen fest, die mit Federn und/oder Daunen gefüllt sind. Die Kissen können verwendet werden als: Rückenkissen; Sitzkissen; Kissen für Armlehnen.

Articles manufacturés garnis de plumes et duvets - Mesurage de l'épaisseur et de la compressibilité des coussins - Partie 1: Méthode d'essai par rotation

La partie 1 de la présente norme prescrit une méthode d'essai par rotation pour évaluer la perte d'épaisseur et la modification de dureté des coussins garnis de plumes et/ou duvets. Ces coussins peuvent être utilisés comme coussins pour: dossiers; assises; accoudoirs.

Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotation

General Information

• Status: Published
• Publication Date: 20-May-2003
• Withdrawal Date: 29-Nov-2003
• ICS: 59.040 - Textile auxiliary materials
• ICS: 97.140 - Furniture
• Technical Committee: CEN/TC 222 - Feather and down as filling material for any article, as well as finished articles filled with feath
• Drafting Committee: CEN/TC 222 - Feather and down as filling material for any article, as well as finished articles filled with feath
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 12-Oct-2022
• Ref Project: SIST EN 13855-1:2004 - Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotation

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Manufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotationFertigartikel gefüllt mit Federn und Daunen - Messung der Dicke und Kompressibilität von Kissen - Teil 1: RotationsprüfverfahrenArticles manufacturés garnis de plumes et duvets - Mesurage de l'épaisseur et de la compressibilité des coussins - Partie 1: Méthode d'essai par rotationManufactured articles solely filled with feathers and down - Measurement of thickness and compressibility of cushions - Part 1: Test method by rotation97.160Tekstilije za dom. PeriloHome textiles. Linen59.040Pomožni materiali za tekstilijeTextile auxiliary materialsICS:Ta slovenski standard je istoveten z:EN 13855-1:2003SIST EN 13855-1:2004en01-januar-2004SIST EN 13855-1:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13855-1May 2003ICS 59.040; 97.140English versionManufactured articles solely filled with feathers and down -Measurement of thickness and compressibility of cushions - Part1: Test method by rotationFertigartikel gefüllt mit Federn und Daunen - Messung derDicke und Kompressibilität von Kissen - Teil 1:RotationsprüfverfahrenThis European Standard was approved by CEN on 14 March 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13855-1:2003 ESIST EN 13855-1:2004
...