EN ISO 2417:2002
(Main)Leather - Physical and mechanical tests - Determination of the static absorption of water (ISO 2417:2002)
Leather - Physical and mechanical tests - Determination of the static absorption of water (ISO 2417:2002)
ISO 2417:2002 specifies a method for determining the water absorption of leather under static conditions. The method is applicable to all leather, particularly heavy leather.
Leder - Physikalische und mechanische Prüfungen - Bestimmung der statischen Wasseraufnahme (ISO 2417:2002)
Diese Internationale Norm legt ein Verfahren zur Bestimmung der Wasseraufnahme von Leder unter statischen Bedingungen fest. Das Verfahren ist für alle Lederarten, insbesondere schwere Leder anwendbar.
Cuir - Essais physiques et mécaniques - Détermination de l'absorption statique d'eau (ISO 2417:2002)
L'ISO 2417:2002 spécifie une méthode de détermination de l'absorption d'eau du cuir dans des conditions statiques. La méthode est applicable à tous les cuirs, notamment aux cuirs épais.
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje statičnega vpijanja vode (ISO 2417:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2003
8VQMH)L]LNDOQLLQPHKDQVNLSUHVNXVL8JRWDYOMDQMHVWDWLþQHJDYSLMDQMDYRGH ,62
Leather - Physical and mechanical tests - Determination of the static absorption of water
(ISO 2417:2002)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der statischen
Wasseraufnahme (ISO 2417:2002)
Cuir - Essais physiques et mécaniques - Détermination de l'absorption statique d'eau
(ISO 2417:2002)
Ta slovenski standard je istoveten z: EN ISO 2417:2002
ICS:
59.140.30 Usnje in krzno Leather and furs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 2417
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2002
ICS 59.140.30
English version
Leather - Physical and mechanical tests - Determination of the
static absorption of water (ISO 2417:2002)
Cuir - Essais physiques et mécaniques - Détermination de Leder - Physikalische und mechanische Prüfungen -
l'absorption statique d'eau (ISO 2417:2002) Bestimmung der statischen Wasseraufnahme (ISO
2417:2002)
This European Standard was approved by CEN on 8 June 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2417:2002 E
worldwide for CEN national Members.
CORRECTED 2003-08-27
Foreword
This document (EN ISO 2417:2002) has been prepared by Technical Committee CEN/TC 289
"Leather", the secretariat of which is held by UNI, in collaboration with the International Union of
Leather Technologists and Chemists Societies (IULTCS).
It is based on Method IUP 7 of the International Union of Leather Technologists and Chemists
Societies.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by June 2003, and conflicting national
standards shall be withdrawn at the latest by June 2003.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg,
Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 2417:2002 has been approved by CEN as EN ISO 2417:2002 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 2418 2002 Leather - Chemical, physical EN ISO 2418 2002
and mechanical and fastness
tests - Sampling location
ISO 2419 2002 Leather - Physical and EN ISO 2419 2002
mechanical tests - Sample
preparation and conditioning
ISO 2420 2002 Leather - Physical and EN ISO 2420 2002
mechanical tests -
Determination of apparent
density
ISO 3696 1987 Water for analytical laboratory EN ISO 3696 1995
use - Specification and test
methods
INTERNATIONAL ISO
STANDARD 2417
IULTCS/IUP
Second edition
2002-12-15
Leather — Physical and mechanical
tests — Determination of the static
absorption of water
Cuir — Essais physiques et mécaniques — Détermination de l’absorption
statique d’eau
Reference number
ISO 2417:2002(E)
IULTCS/IUP 7
©
ISO 2002
ISO 2417:2002(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2002
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2002 – All rights reserved
ISO 2417:2002(E)
Contents
Page
Foreword.iv
1 Scope .1
2 Normative references .1
3 Principle.1
4 Apparatus .1
5 Sampling and sample preparation .2
6 Procedure .2
7 Expression of results .3
8 Test report .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.