EN ISO 11127-5:1997

Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993)

The procedure includes weighing a test portion of approximately 100 g into a container, placing the container with the test portion in an oven previously adjusted to 110 °C, leaving for at least 1 h, transferring the container to a desiccator, allowing to cool to room temperature, reweighing the container with the dried test portion, determining the mass of the dried test portion. Annex A gives information on the international standards series for non-metallic blast-cleaning abrasives ISO 11126 and ISO 11127.

Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen - Prüfverfahren für nichtmetallische Strahlmittel - Teil 5: Bestimmung der Feuchte (ISO 11127-5:1993)

Dies ist ein Teil aus einer Reihe von Teilen der Norm ISO 11127, welche die Probenahme und die Prüfung von nichtmetallischen Strahlmitteln behandelt. Die Normenreihen ISO 11126 und ISO 11127 wurden als Zusammengehöriger Satz von Internationalen Normen über nichtmetallische Strahlmittel ausgearbeitet.

Préparation des subjectiles d'acier avant application de peintures et de produits assimilés - Méthodes d'essai pour abrasifs non métalliques destinés à la préparation par projection - Partie 5: Détermination de l'humidité (ISO 11127-5:1993)

La présente norme est l'une des parties de l'ISO 11127, qui traite de l'échantillonnage et des essais des abrasifs non métalliques destinés à la préparation par projection. Les types d'abrasifs non métalliques et les prescriptions relatives à chacun figurent dans les différentes parties de l'ISO 11126. Les séries des normes ISO 11126 et ISO 11127 constituent une série cohérente de normes internationales sur les abrasifs non métalliques destinés à la préparation par projection. Des informations sur toutes les parties des deux séries sont données dans l'annexe A. La présente partie de l'ISO 11127 prescrit une méthode pour la détermination de l'humidité absorbée par des abrasifs non métalliques destinés à la préparation par projection. Elle est déterminée par la mesure de perte de masse après chauffage.

Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov - Preskusne metode za nekovinske granulate za peskanje - 5. del: Ugotavljanje vlage (ISO 11127-5:1993)

General Information

• Status: Withdrawn
• Publication Date: 22-Jul-1997
• Withdrawal Date: 14-Dec-2011
• ICS: 87.020 - Paint coating processes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Dec-2011
• Completion Date: 15-Dec-2011
• Ref Project: SIST EN ISO 11127-5:1997 - Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:1993)

Relations

• Replaced By: EN ISO 11127-5:2011 - Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:2011)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11127-5:1997
01-december-1997
Priprava jeklenih podlag pred nanašanjem barvnih in sorodnih premazov -
Preskusne metode za nekovinske granulate za peskanje - 5. del: Ugotavljanje
vlage (ISO 11127-5:1993)
Preparation of steel substrates before application of paints and related products - Test
methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture
(ISO 11127-5:1993)
Vorbereitung von Stahloberflächen vor dem Auftragen von Beschichtungsstoffen -
Prüfverfahren für nichtmetallische Strahlmittel - Teil 5: Bestimmung der Feuchte (ISO
11127-5:1993)
Préparation des subjectiles d'acier avant application de peintures et de produits
assimilés - Méthodes d'essai pour abrasifs non métalliques destinés a la préparation par
projection - Partie 5: Détermination de l'humidité (ISO 11127-5:1993)
Ta slovenski standard je istoveten z: EN ISO 11127-5:1997
ICS:
25.220.10 Priprava površine Surface preparation
SIST EN ISO 11127-5:1997 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11127-5:1997

---------------------- Page: 2 ----------------------

SIST EN ISO 11127-5:1997

---------------------- Page: 3 ----------------------

SIST EN ISO 11127-5:1997

---------------------- Page: 4 ----------------------

SIST EN ISO 11127-5:1997

---------------------- Page: 5 ----------------------

SIST EN ISO 11127-5:1997

---------------------- Page: 6 ----------------------

SIST EN ISO 11127-5:1997
INTERNATIONAL
ISO
STANDARD
11127-5
First edition
1993-12-15
Preparation of steel Substrates before
application of paints and related
products
- Test methods for non-metallic
blast-cleaning abrasives -
Part 5:
Determination of moisture
Pkparation des subjectiles d’acier avant application de peintures et de
produits assimik - Mkthodes d’essai pour abrasifs non m&alliques
destin6s 2 Ia prdparation par projection -
Partie 5: Determination de I’humidite
Weference number
ISO 11127-5:1993(E)

---------------------- Page: 7 ----------------------

SIST EN ISO 11127-5:1997
ISO 11127=5:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (SS0 member bodies). The work
of preparing lnternational Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(1 EC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % 0% the member bodies casting
a vote.
International Standard ISO 11127-5 was prepared by Technical Committee
ISOnC 35, Paints and varnishes, Subcommittee SC 12, Preparation of
steel Substrates before application of paints and related products.
ISO 11127 consists of the following Parts, under the general title Prep-
aration of steel Substrates before application of paints and related
products - Test methods for non-metallic blast-cleaning abrasives:
- Part Im Sampling
- Part 2: Determination of particle size distribution
- Part 3: Determination o f apparent density
- Part 4: Assessment of hardness by a glass slide test
- Part 5: Determination of moisture
- Part 6: De fermination of water-soluble contaminants by conductivity
measurement
- Part 7: Determination o f wa ter-soluble chlorides
- Part 8: Determination of abrasive mechanical properties
0 ISO 1993
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronie or mechanical, including photocopying and
microfilm, without Permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 0 CH-1 211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 8 ----------------------

SIST EN ISO 11127-5:1997
0 ISO ISO 1 ‘I 127=5:1993(E)
At the time of publication of this part of ISO 11127, part 8 was in course
0% preparation.
Annex A 0% this part of ISO 11127 is for information only.

---------------------- Page: 9 ----------------------

SIST EN ISO 11127-5:1997
This page intentionally left blank

---------------------- Page: 10 ----------------------

SIST EN ISO 11127-5:1997
INTERNATIONAL STANDARD 0 ISO BS0 11127=5:1993(E)
Preparation of steel Substrates before application of
paints and related products - Test methods for
non-metallic blast-cleaning abrasives -
...