Fibres - Elasticity of fibres - Test methods

This test method covers the determination of the elasticity of fibres and may lead to classification of the fibre as elastic fibre (see Annex A).
It is applicable to single man-made crimped and uncrimped fibres.

Fasern - Elastizität von Fasern - Prüfung

Dieses Prüfverfahren umfasst die Bestimmung der Elastizität von Fasern und erlaubt eine Einstufung von Fasern als elastische Fasern (siehe Anhang A). Es ist anwendbar auf gekräuselte und ungekräuselte Chemiefasern.

Fibres - Elasticité des fibres - Méthodes d'essais

La présente méthode d’essai couvre la détermination de l’élasticité des fibres et peut aboutir à la classification
de la fibre comme fibre élastique (voir l’Annexe A).
Elle est applicable aux fibres chimiques frisées et non frisées, prises individuellement.

Vlakna - Elastičnost vlaken - Preskusne metode

Ta preskusna metoda zajema določevanje elastičnosti vlaken in lahko vodi k razvrstitvi vlakna kot elastično vlakno (glej Dodatek A). Uporablja se za enojna sintetična kodrana in nekodrana vlakna.

General Information

Status
Published
Publication Date
14-Sep-2010
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
14-Feb-2022

Buy Standard

Standard
EN 15930:2010
English language
15 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Faser - Elastizität von Fasern - PrüfungFibres - Élasticité des fibres - Méthodes d'essaiFibres - Elasticity of fibres - Test methods59.060.01Tekstilna vlakna na splošnoTextile fibres in generalICS:Ta slovenski standard je istoveten z:EN 15930:2010SIST EN 15930:2010en,fr,de01-december-2010SIST EN 15930:2010SLOVENSKI
STANDARD



SIST EN 15930:2010



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15930
September 2010 ICS 59.060.01 English Version
Fibres - Elasticity of fibres - Test methods
Fibres - Elasticité des fibres - Méthodes d'essais
Fasern - Elastizität von Fasern - Prüfung This European Standard was approved by CEN on 7 August 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15930:2010: ESIST EN 15930:2010



EN 15930:2010 (E) 2 Contents Page Foreword .31Scope .42Normative references .43Terms and definitions .44Principle .55Apparatus .56Atmosphere of conditioning and testing .67Sampling .68Preparation of the test specimens .69Procedure .710Calculation and expression of the results . 1111Test report . 12Annex A (normative)
"Elastic" qualification of fibres . 14Bibliography . 15 SIST EN 15930:2010



EN 15930:2010 (E) 3 Foreword This document (EN 15930:2010) has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2011, and conflicting national standards shall be withdrawn at the latest by March 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following co
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.