EN 4024:2001

Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45° welded end with thrust wire nut

This standard specifies the characteristics of elbows 45°, welded end, with thrust wire nut, for pipe couplings 8°30', in
titanium alloy, for aerospace applications.
Nominal pressure: up to 28 000 kPa
Temperature range:   55 °C to 135 °C

Luft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - Winkelverschraubungen 45° mit Anschweißende mit Mutter mit Schubdraht

Diese Norm legt die Eigenschaften von Winkelverschraubungen 45° mit Anschweißende, mit Mutter mit Schubdraht,  für
Rohrverschraubungen 8°30', aus Titanlegierung, zur Verwendung in der Luft- und Raumfahrt fest.
Nenndruck: bis 28 000 kPa
Temperaturbereich:   55 °C bis 135 °C

Série aérospatiale - Système de raccordement 8°30' en alliage de titane - Raccords coudés à 45° à souder avec écrou à jonc

La présente norme spécifie les caractéristiques des raccords coudés à 45° à souder, avec écrou à jonc, pour les systèmes
de raccordement 8°30', en alliage de titane, pour applications aérospatiales.
Pression nominale: jusqu'à 28 000 kPa
Plage de température:   55 °C à 135 °C

Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45° welded end with thrust wire nut

General Information

• Status: Withdrawn
• Publication Date: 23-Oct-2001
• Withdrawal Date: 14-Jul-2009
• ICS: 49.080 - Aerospace fluid systems and components
• Technical Committee: ASD/MECH - Mechanical
• Drafting Committee: ASD/MECH - Mechanical
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Jul-2009
• Completion Date: 15-Jul-2009
• Ref Project: SIST EN 4024:2004 - Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45° welded end with thrust wire nut

Relations

• Replaced By: EN 4024:2009 - Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45° welded end with thrust wire nut
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45° welded end with thrust wire nutLuft- und Raumfahrt - Rohrverschraubung 8°30' aus Titanlegierung - Winkelverschraubungen 45° mit Anschweißende mit Mutter mit SchubdrahtSérie aérospatiale - Systeme de raccordement 8°30' en alliage de titane - Raccords coudés a 45° a souder avec écrou a joncAerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45° welded end with thrust wire nut49.080Aerospace fluid systems and componentsICS:Ta slovenski standard je istoveten z:EN 4024:2001SIST EN 4024:2004en01-maj-2004SIST EN 4024:2004SLOVENSKI
STANDARD



SIST EN 4024:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4024October 2001ICS 49.080English versionAerospace series - Pipe coupling 8°30' in titanium alloy - Elbows45° welded end with thrust wire nutSérie aérospatiale - Système de raccordement 8°30' enalliage de titane - Raccords coudés à 45° à souder avecécrou à joncLuft- und Raumfahrt - Rohrverschraubung 8°30' ausTitanlegierung - Winkelverschraubungen 45° mitAnschweißende, mit Mutter mit SchubdrahtThis European Standard was approved by CEN on 29 December 2000.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4024:2001 ESIST EN 4024:2004



EN 4024:2001 (E)ForewordThis European Standard has been prepared by the European Association of Aerospace Manufacturers (AECMA).After inquiries and votes carried out in accordance with the rules of this Association, this Standard has received theapproval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentationto CEN.This European Standard shall be given the status of a national standard, either by publication of an identical text or byendorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at the latest by April 2002.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries arebound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany,Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the UnitedKingdom.2SIST EN 4024:2004



EN 4024:2001 (E)1
ScopeThis standard specifies the characteristics of elbows 45°, welded end, with thrust wire nut, for pipe couplings 8°30', intitanium alloy, for aerospace applications.Nominal pressure: up to 28 000 kPaTemperature range:
55 °C to 135 °C2
Normative referencesThis European Standard incorporates by dated or undated reference provisions from other publications. These normativereferences are cited at the appropriate places in the text and the publications are listed hereafter. For dated references,subsequent amendments to or revisions of any of these publications apply to this European S
...