EN 2817:2009
(Main)Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 1 070 MPa
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 1 070 MPa
This European Standard specifies the requirements relating to:
Steel FE-PM1802 (X5CrNiCu15-5)
Consumable electrode remelted
Solution treated and precipitation treated
Bar for machining
a or D <= 200 mm
Rm >= 1 070 MPa
for aerospace applications.
Luft- und Raumfahrt - Stahl FE-PM1802 (X5CrNiCu15-5) - Mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgelagert - Stangen zur spanenden Bearbeitung - a oder D ≤ 200 mm - Rm ≥ 1 070 MPa
Diese Norm legt die Anforderungen an
Stahl FE-PM 1802 (X5CrNiCu15-5)
mit selbstverzehrender Elektrode umgeschmolzen
lösungsgeglüht und ausgehärtet
Stangen zur spanenden Bearbeitung
a oder D ≤ 200 mm
Rm ≥ 1 070 MPa
für Anwendungen in der Luft- und Raumfahrt fest.
Série aérospatiale - Acier FE-PM1802 (X5CrNiCu15-5) - Refondu à l'électrode consommable - Mis en solution et vieilli - Barres pour usinage - a ou D ≤ 200 mm - Rm ≥ 1 070 MPa
Aeronavtika - Jeklo FE-PM1802 (X5CrNiCu15-5) - Pretaljeno s talilno elektrodo - Žarjeno v topilu in utrjeno - Palice za obdelavo - a ali D ≤ 200 mm - Rm ≥ 1070 MPa
Ta evropski standard opredeljuje zahteve, ki se nanašajo na: Jeklo FE-PM1802 (X5CrNiCu15-5), pretaljeno s talilno elektrodo, žarjeno v topilu in utrjeno, palice za obdelavo a ali D ≤ 200 mm - Rm ≥ 1070 MPa za uporabo v aeronavtiki.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YHU]HKUHQGHUpOHFWURGH49.025.10JeklaSteelsICS:Ta slovenski standard je istoveten z:EN 2817:2009SIST EN 2817:2010en,de01-januar-2010SIST EN 2817:2010SLOVENSKI
STANDARD
SIST EN 2817:2010
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2817
November 2009 ICS 49.025.10 English Version
Aerospace series - Steel FE-PM1802 (X5CrNiCu15-5) - Consumable electrode remelted - Solution treated and precipitation treated - Bar for machining - a or D ≤ 200 mm - Rm ≥ 1 070 MPa
Série aérospatiale - Acier FE-PM1802 (X5CrNiCu15-5) - Refondu à l'électrode consommable - Mis en solution et vieilli - Barres pour usinage - a ou D ≤ 200 mm - Rm ≥ 1 070 MPa
Luft- und Raumfahrt - Stahl FE-PM1802 (X5CrNiCu15-5) - Mit selbstverzehrender Elektrode umgeschmolzen - Lösungsgeglüht und ausgelagert - Stangen zur spanenden Bearbeitung - a oder D ≤ 200 mm - Rm ≥ 1 070 MPa This European Standard was approved by CEN on 8 August 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2817:2009: ESIST EN 2817:2010
EN 2817:2009 (E) 2 Foreword This document (EN 2817:2009) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2010, and conflicting national standards shall be withdrawn at the latest by May 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 2817:2010
EN 2817:2009 (E) 3 Introduction This European Standard is part of the series of EN metallic material standards for aerospace applications. The general organization of this series is described in EN 4258. This standard has been prepared in accordance with EN 4500-5. SIST EN 2817:2010
EN 2817:2009 (E) 4 1 Scope This European Standard specifies the requirements relating to: Steel FE-PM1802 (X5CrNiCu15-5) Consumable electrode remelted Solution treated and precipitation treated Bar for machining a or D ≤ 200 mm Rm ≥ 1 070 MPa for aerospace applications. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2043, Aerospace series — Metallic materials — General requirements for semi-finished product qualification (excluding forgings and castings) 1) EN 4258, Aerospace series — Metallic materials — General organization of standardization — Links between types of EN standards and their use EN 4436, Aerospace series — Steel — Test methods — Determination of δ ferrite content 1) EN 4500-5, Aerospace series — Metallic materials — Rules for drafting and presentation of material standards
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.