Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999, including Cor 1:2001)

Check DOW!

Akustik - Bestimmung der Schallleistungspegel von Geräuschquellen aus Schalldruckmessungen - Hallraumverfahren der Genauigkeitsklasse 1 (ISO 3741:1999, einschließlich Cor 1:2001)

Acoustique - Détermination des niveaux de puissance acoustique émis par les sources de bruit à partir de la pression acoustique - Méthodes de laboratoire en salles réverbérantes (ISO 3741:1999, Cor 1:2001 inclus)

NEW!IEC 60942:2017 est disponible sous forme de IEC 60942:2017 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L'IEC 60942:2017 spécifie les exigences de performance de trois classes de calibreurs acoustiques: la classe LS (Laboratory Standard, étalon de laboratoire), la classe 1 et la classe 2. Les limites d'acceptation les plus faibles concernent la classe LS et les plus élevées concernent les appareils de classe 2. Les calibreurs acoustiques de classe LS ne sont normalement utilisés qu'en laboratoire; les appareils de classe 1 et de classe 2 sont considérés comme des calibreurs acoustiques utilisés sur le terrain. Un calibreur de classe 1 est prévu pour être utilisé principalement avec un sonomètre de classe 1 et un calibreur de classe 2 est prévu pour être utilisé principalement avec un sonomètre de classe 2, tel qu'il est spécifié dans l'IEC 61672-1. Les limites d'acceptation concernant les calibreurs de classe LS pour démontrer la conformité avec les exigences du présent document sont basées sur l'utilisation d'un microphone étalon de laboratoire spécifié dans l'IEC 61094-1. Les limites d'acceptation concernant les calibreurs acoustiques de classe 1 et 2 pour démontrer la conformité avec les exigences du présent document sont basées sur l'utilisation d'un microphone étalon de travail spécifié dans l'IEC 61094-4. Cette quatrième édition annule et remplace la troisième édition parue en 2003, dont elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) suppression des désignations de classe, classe LS/C, classe 1/C et classe 2/C;
b) ajout de deux autres désignations de classes, les classes LS/M et 1/M, spécifiquement destinées aux pistonphones;
c) ajout d'un critère modifié pour évaluer la conformité avec une spécification: désormais, la conformité est démontrée lorsque (a) les écarts mesurés par rapport aux valeurs nominales ne dépassent pas les limites d'acceptation applicables et (b) l'incertitude de mesure ne dépasse pas l'incertitude de mesure maximale admise correspondante;
d) modification de l'essai de fluctuation du niveau à court terme de la stabilité du niveau de pression acoustique;
e) modification de certaines conditions applicables aux essais d'environnement pour éviter la formation de givre;
f) ajout d'une variante d'essai pour l'immunité aux champs aux fréquences radioélectriques, faisant appel aux guides d'ondes électromagnétiques transverses (TEM).

Akustika - Ugotavljanje ravni zvočnih moči virov hrupa z zvočnim tlakom - Precizijska metoda za odmevnice (ISO 3741:1999, vkjlučno s popravkom Cor 1:2001)

General Information

Status
Withdrawn
Publication Date
28-Jul-2009
Withdrawal Date
30-Sep-2010
Technical Committee
Drafting Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
01-Oct-2010
Completion Date
01-Oct-2010

Relations

Buy Standard

Standard
EN ISO 3741:2009
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN ISO 3741:2009
English language
44 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Akustik - Ermittlung der Schalleistungspegel von Geräuschquellen durch Schalldruckmessungen - Hallraumverfahren der Genauigkeitsklasse 1 (ISO 3741:1999, einschließlich Cor 1:2001)Acoustique - Détermination des niveaux de puissance acoustique émis par les sources de bruit à partir de la pression acoustique - Méthodes de laboratoire en salles réverbérantes (ISO 3741:1999, Cor 1:2001 inclus)Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999, including Cor 1:2001)17.140.01Acoustic measurements and noise abatement in generalICS:Ta slovenski standard je istoveten z:EN ISO 3741:2009SIST EN ISO 3741:2009en01-november-2009SIST EN ISO 3741:2009SLOVENSKI
STANDARDSIST EN ISO 3741:2001/AC:2002SIST EN ISO 3741:20011DGRPHãþD



SIST EN ISO 3741:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 3741July 2009ICS 17.140.01Supersedes EN ISO 3741:1999
English VersionAcoustics - Determination of sound power levels of noisesources using sound pressure - Precision methods forreverberation rooms (ISO 3741:1999, including Cor 1:2001)Acoustique - Détermination des niveaux de puissanceacoustique émis par les sources de bruit à partir de lapression acoustique - Méthodes de laboratoire en sallesréverbérantes (ISO 3741:1999, Cor 1:2001 inclus)Akustik - Ermittlung der Schalleistungspegel vonGeräuschquellen durch Schalldruckmessungen -Hallraumverfahren der Genauigkeitsklasse 1 (ISO3741:1999, einschließlich Cor 1:2001)This European Standard was approved by CEN on 13 July 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 3741:2009: ESIST EN ISO 3741:2009



EN ISO 3741:2009 (E) 2 Contents Page Foreword .3Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC .4Annex ZB (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .5 SIST EN ISO 3741:2009



EN ISO 3741:2009 (E) 3 Foreword The text of ISO 3741:1999, including Cor 1:2001 has been prepared by Technical Committee ISO/TC 43 “Acoustics” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 3741:2009 by Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2010, and conflicting national standards shall be withdrawn at the latest by January 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 3741:1999. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directives. For relationship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, D
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Akustik - Ermittlung der Schalleistungspegel von Geräuschquellen durch Schalldruckmessungen - Hallraumverfahren der Genauigkeitsklasse 1 (ISO 3741:1999, einschließlich Cor 1:2001)Acoustique - Détermination des niveaux de puissance acoustique émis par les sources de bruit à partir de la pression acoustique - Méthodes de laboratoire en salles réverbérantes (ISO 3741:1999, Cor 1:2001 inclus)Acoustics - Determination of sound power levels of noise sources using sound pressure - Precision methods for reverberation rooms (ISO 3741:1999, including Cor 1:2001)17.140.01Acoustic measurements and noise abatement in generalICS:Ta slovenski standard je istoveten z:FprEN ISO 3741kSIST FprEN ISO 3741:2009en01-junij-2009kSIST FprEN ISO 3741:2009SLOVENSKI
STANDARD



kSIST FprEN ISO 3741:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMFINAL DRAFTFprEN ISO 3741March 2009ICS 17.140.01Will supersede EN ISO 3741:1999
English VersionAcoustics - Determination of sound power levels of noisesources using sound pressure - Precision methods forreverberation rooms (ISO 3741:1999, including Cor 1:2001)Acoustique - Détermination des niveaux de puissanceacoustique émis par les sources de bruit à partir de lapression acoustique - Méthodes de laboratoire en sallesréverbérantes (ISO 3741:1999, Cor 1:2001 inclus)Akustik - Ermittlung der Schalleistungspegel vonGeräuschquellen durch Schalldruckmessungen -Hallraumverfahren der Genauigkeitsklasse 1 (ISO3741:1999, einschließlich Cor 1:2001)This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the TechnicalCommittee CEN/TC 211.If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has thesame status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. FprEN ISO 3741:2009: EkSIST FprEN ISO 3741:2009



FprEN ISO 3741:2009 (E) 2 Contents Page Foreword .3Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC .4Annex ZB (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC .5 kSIST FprEN ISO 3741:2009



FprEN ISO 3741:2009 (E) 3 Foreword The text of ISO 3741:1999, including Cor 1:2001 has been prepared by Technical Committee ISO/TC 43 “Acoustics” of the International Organization for Standardization (ISO) and has been taken over as FprEN ISO 3741:2009 by Technical Committee CEN/TC 211 “Acoustics” the secretariat of which is held by DS. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN ISO 3741:1999. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EC Directives. For relationship with EC Directives, see informative Annexes ZA and ZB, which are integral parts of this document. Endorsement notice The text of ISO 3741:1999, including Cor 1:2001 has been approved by CEN as a FprEN ISO 3741:2009 without any modification. kSIST FprEN ISO 3741:2009



FprEN ISO 3741:2009 (E) 4 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC This European Standard has been prepared under a mandate given to CEN by the European Commission and the European Free Tra
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.