CEN ISO/TR 20174:2005

Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2005)

ISO 20174:2005 provides a Japanese grouping system for materials for welding purposes, classified in accordance with the grouping system of ISO/TR:15608:2000.

Schweißen - Werkstoffgruppeneinteilung - Japanische Werkstoffe (ISO/TR 20174:2005)

Dieser Technische Bericht enthält eine Japanische Gruppeneinteilung von Werkstoffen zum Schweißen, gegliedert nach der Gruppeneinteilung von ISO/TR 15608.
Er kann auch für andere Zwecke wie Wärmebehandlung, Umformen, zerstörungsfreie Prüfung, angewendet werden.
Dieser Technische Bericht enthält Gruppeneinteilungen für die folgenden genormten Werkstoffe:
-   Stahl;
-   Aluminium und seine Legierungen;
-   Titan und seine Legierungen.

Soudage - Systèmes de groupement des matériaux - Matériaux japonais (ISO/TR 20174:2005)

Varjenje – Razvrščanje japonskih materialov v skupine (ISO/TR 20174:2005)

General Information

• Status: Withdrawn
• Publication Date: 14-Dec-2005
• Withdrawal Date: 07-Jul-2020
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 08-Jul-2020
• Ref Project: SIST-TP CEN ISO/TR 20174:2006 - Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2005)

Relations

• Replaced By: CEN ISO/TR 20174:2020 - Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2020)
• Effective Date: 03-Jul-2019

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2006
9DUMHQMH±5D]YUãþDQMHMDSRQVNLKPDWHULDORYYVNXSLQH,6275
Welding - Grouping systems for materials - Japanese materials (ISO/TR 20174:2005)
Schweißen - Werkstoffgruppeneinteilung - Japanische Werkstoffe (ISO/TR 20174:2005)
Soudage - Systemes de groupement des matériaux - Matériaux japonais (ISO/TR
20174:2005)
Ta slovenski standard je istoveten z: CEN ISO/TR 20174:2005
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

TECHNICAL REPORT
CEN ISO/TR 20174
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
December 2005
ICS 25.160.20
English Version
Welding - Grouping systems for materials - Japanese materials
(ISO/TR 20174:2005)
Soudage - Systèmes de groupement des matériaux - Schweißen - Werkstoffgruppeneinteilung - Japanische
Matériaux japonais (ISO/TR 20174:2005) Werkstoffe (ISO/TR 20174:2005)
This Technical Report was approved by CEN on 22 November 2005. It has been drawn up by the Technical Committee CEN/TC 121.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TR 20174:2005: E
worldwide for CEN national Members.

Foreword
This document (CEN ISO/TR 20174:2005) has been prepared by Technical Committee
CEN/TC 121 "Welding", the secretariat of which is held by DIN, in collaboration with Technical
Committee ISO/TC 44 "Welding and allied processes".

TECHNICAL ISO/TR
REPORT 20174
First edition
2005-12-15
Welding — Grouping systems for
materials — Japanese materials
Soudage — Systèmes de groupement des matériaux — Matériaux
japonais
Reference number
ISO/TR 20174:2005(E)
©
ISO 2005
ISO/TR 20174:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved

ISO/TR 20174:2005(E)
Contents Page
Foreword. iv
1 Scope . 1
2 Japanese grouping system for materials. 2
2.1 Types of steels in accordance with the grouping system of ISO/TR 15608:2000, Table 1 . 2
2.2 Types of aluminium and aluminium alloys in accordance with the grouping system of
ISO/TR 15608:2000, Table 2 . 16
2.3 Types of titanium and titanium alloys in accordance with the grouping system of
ISO/TR 15608:2000, Table 5 . 21
Bibliography . 25

ISO/TR 20174:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
In exceptional circumstances, when a technical committee has collected data of a different kind from that
which is normally published as an International Standard (“state of the art”, for example), it may decide by a
simple majority vote of its participating members to publish a Technical Report. A Technical Report is entirely
informative in nature and does not have to be reviewed until the data it provides are considered to be no
longer valid or useful.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TR 20174 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 121, Welding, in collaboration with Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 10, Unification of requirements in the field of metal welding, in accordance with the
Agreement on technical cooperation between ISO and CEN (Vienna Agreement).

iv © ISO 2005 – All rights reserved

TECHNICAL REPORT ISO/TR 20174:2005(E)

Welding — Grouping systems for materials — Japanese
materials
1 Scope
This Technical Report provides a Japanese grouping system for materials for welding purposes, classified in
accordance with the grouping system of ISO/TR:15608.
It may also apply for other purposes, such as heat treatment, forming, and non-destructive testing.
This Technical Report covers grouping systems for the following standardized materials:
⎯ steel;
⎯ aluminium and its alloys;
⎯ titanium and its alloys.
ISO/TR 20174:2005(E)
2 Japanese grouping system for materials
2.1 Types of steels in accordance with the grouping system of ISO/TR 15608:2000, Table 1
See Table 1.
Table 1 — Japanese grouping system for steels
Group Reference standard Designation
JIS G 3101 SS330
SS400
JIS G 3103 SB410
SB450
SB480
SB450M
SB480M
JIS G 3106 SM400A
SM400B
SM400C
JIS G 3113 SAPH310
JIS G 3116 SG255
JIS G 3115 SPV235
JIS G 3118 SGV410
SGV450
SGV480
JIS G 3126 SLA235A
SLA235B
1.1
JIS G 3131 SPHC
SPHD
SPHE
JIS G 3135 SPFC340
SPFC370
SPFC390
SPFC440
SPFC490Y
SPFC540Y
SPFC590Y
SPFC340H
JIS G 3136 SN400A
SN400B
SN400C
JIS G 3444 STK290
STK400
STK500
STK490
2 © ISO 2005 – All rights reserved

ISO/TR 20174:2005(E)
Table 1 (continued)
Group Reference standard Designation
JIS G 3452 SGP
JIS G 3454 STPG370
STPG410
JIS G 3455 STS370
STS410
STS480
JIS G 3456 STPT370
STPT410
STPT480
JIS G 3457 STPY400
JIS G 3458 STPA12
JIS G 3460 STPL380
JIS G 3461 STB340
STB410
JIS G 3462 STBA12
1.1
STBA13
JIS G 3464 STBL380
JIS G 3467 STF410
STFA12
JIS G 3472 STAM290GA
STAM290GB
STAM340G
STAM390G
JIS G 3473 STC370
JIS G 3475 STKN400W
STKN400B
JIS G 3201 SF340A
SF390A
SF440A
SF490A
SF540A
ISO/TR 20174:2005(E)
Table 1 (continued)
Group Reference standard Designation
JIS G 3202 SFVC1
SFVC2A
SFVC2B
1.1
JIS G 3203 SFVAF1
JIS G 3205 SFL1
SFL2
JIS G 3101 SS490
JIS G 3106 SM490A
SM490B
SM490C
SM490YA
SM490YB
JIS G 3115 SPV315
SPV355
JIS G 3116 SG295
SG325
JIS G 3119 SBV1A
SBV1B
SBV2
1.2 JIS G 3120 SQV1A
SQV2A
JIS G 3126 SLA325A
SLA325B
JIS G 3134 SPFH490
SPFH540
SPFH540Y
SPFH590Y
JIS G 3135 SPFC490
SPFC540
SPFC590
JIS G 3136 SN490B
SN490C
JIS G 3461 STB510
4 © ISO 2005 – All rights reserved

ISO/TR 20174:2005(E)
Table 1 (continued)
Group Reference standard Designation
JIS G 3472 STAM440G
STAM470G
STAM500G
STAM440H
JIS G 3473 STC440
1.2
JIS G 3475 STKN490B
JIS G 3201 SF540B
SF590A
SF590B
JIS G 3204 SFVQ1A
JIS G 3106 SM520BN
SM520CN
JIS G 3113 SAPH370
SAPH400
SAPH440
1.3
JIS G 3115 SPV450N
SPV490N
JIS G 3124 SEV245N
SEV295N
SEV345N
JIS G 3114 SMA400AW
SMA400AP
SMA400BW
SMA400BP
SMA400CW
SMA400CP
1.4
SMA490AW
SMA490AP
SMA490BW
SMA490BP
SMA490CW
SMA490CP
ISO/TR 20174:2005(E)
Table 1 (continued)
Group Reference standard Designation
JIS G 3106 SM490YATMC
SM490YBTMC
SM520BTMC
SM520CTMC
SM570TMC
JIS G 3114 SMA490AWTMC
SMA490APTMC
SMA490BWTMC
2.1
SMA490BPTMC
SMA490CWTMC
SMA490CPTMC
JIS G 3114 SMA570WTMC
SMA570PTMC
JIS G 3115 SPV410TMC
SPV450TMC
JIS G 3129 SH590P-TMC
SH590S-TMC
2.2 JIS G3115 SPV490TMC
JIS G 3106 SM570Q
JIS G 3114 SMA570WQ
SMA570PW
JIS G 3115 SPV410Q
SPV450Q
SPV490Q
JIS G 3120 SQV1B
3.1 SQV2B
SQV3A
SQV3B
JIS G 3128 SHY685
SHY685N
SHY685NS
SHY685NS-F
JIS G 3201 SF640B
6 © ISO 2005 – All rights reserved

ISO/TR 20174:2005(E)
Table 1 (continued)
Group Reference standard Designation
JIS G 3204 SFVQ1B
3.1
SFVQ2B
SFVQ3
JIS G 3458 STPA20
4.2 JIS G 3462 STBA20
JIS G 3203 SFVAF2
JIS G 3458 STPA22
STPA23
JIS G 3462 STBA22
STBA23
JIS G 3467 STFA22
STFA23
JIS G 4109 SCMV11
5.1
SCMV12
SCMV21
SCMV22
SCMV31
SCMV32
JIS G 3203 SFVAF12
SFVAF11A
SFVAF11B
JIS G 3458 STPA24
JIS G 3462 STBA24
JIS G 3467 STFA24
JIS G 4109 SCMV41
SCMV42
SCMV51
5.2 SCMV52
JIS G 4110 SCMQ4E
JIS G 3203 SFVAF22A
SFVAF22B
SFVAF21A
SFVAF21B
JIS G 3206 SFVCMF22B
ISO/TR 20174:2005(E)
Table 1 (continued)
Group Reference standard Designation
JIS G 3458 STPA25
JIS G 3462 STBA25
JIS G 3467 STFA25
JIS G 4109 SCMV61
5.3 SCMV62
JIS G 3203 SFVAF5A
SFVAF5B
SFVAF5C
SFVAF5D
JIS G 3458 STPA26
STBA26
5.4
JISN G 3467 STFA26
JIS G 3203 SFVAF9
JIS G 4110 SCMQ4V
SCMQ5V
6.2
JIS G 3206 SFVCMF22V
SFVCMF3V
JIS G 4304 SUS405
SUS410L
SUS429
SUS430
SUS430LX
SUS430J1L
SUS434
SUS436L
7.1
SUS436J1L
SUS444
SUS445J1
SUS445J2
SUS447J1
SUSXM27
JIS G4305 SUS405
SUS410L
8 © ISO 2005 – All rights reserved

ISO/TR 20174:2005(E)
Table 1 (continued)
Group Reference standard Designation
JIS G4305 SUS429
SUS430
SUS430LX
SUS430J1L
SUS434
SUS436L
SUS436J1L
SUS444
SUS445J1
SUS445J2
SUS447J1
SUSXM27
7.1
JIS G 3446 SUS430TKA
SUS430TKC
JIS G 3463 SUS405TB
SUS409TB
SU409LTB
SUS430TB
SUS430LXTB
SUS430J1LTB
SUS436LTB
SUS444TB
SUSXM8TB
SUSXM27TB
JIS G4304 SUS403
SUS410
SUS410S
SUS420J1
7.2 SUS420J2
SUS429J1
SUS440A
JIS G 4305 SUS403
SUS410
ISO/TR 20174:2005(E)
Table 1 (continued)
Group Reference standard Designation
JIS G 4305 SUS410S
SUS420J1
SUS420J2
SUS429J1
SUS440A
JIS G 3214 SUSF410-A
SUSF410-B
7.2 SUSF410-C
SUSF410-D
SUSF6B
SUSF6NM
JIS G 3446 SUS410TKA
SUS420J1TKA
SUS420J2TKA
SUS410TKC
JIS G4304 SUS630
SUS631
7.3 JIS G4305 SUS630
SUS631
JIS G 3214 SUSF630
JIS G 4304 SUS301
SUS301L
SUS301J1
SUS302
SUS302B
SUS304
8.1 SUS304L
SUS304N1
SUS304N2
SUS304LN
SUS304J1
SUS304J2
SUS305
10 © ISO 2005 – All rights reserved

ISO/TR 20174:2005(E)
Table 1 (continued)
Group Reference standard Designation
JIS G 4304 SUS315J1
SUS315J2
SUS316
SUS316L
SUS316N
SUS316LN
SUS316Ti
SUS316J1
SUS316J1L
SUS317
SUS317L
SUS317LN
SUS317J1
SUS321
SUS347
SUSXM7
8.1 SUSXM151J1
JIS G4305 SUS301
SUS301L
SUS301J1
SUS302
SUS302B
SUS304
SUS304L
SUS304N1
SUS304N2
SUS304LN
SUS304J1
SUS304J2
SUS305
SUS315J1
SUS315J2
SUS316
©
...