EN 494:2004

Fibre-cement profiled sheets and fittings - Product specification and test methods

This document specifies the technical requirements and establishes methods of control and test as well as acceptance conditions for fibre-cement profiled sheets and their fibre-cement fittings for one or more of the following uses:
- roofing,
- internal wall finishes,
- external wall and ceiling finishes.
For the purpose of this document fibre-cement profiled sheets are classified according to their height of corrugation and their mechanical characteristics.
This document covers fibre-cement profiled sheets reinforced with fibres of different type as specified in 5.1.1, with and without factory applied coating.
This document does not include calculations with regard to works, design requirements, installation techniques, wind uplift or rain proofing of the installed sheets.
NOTE   Some of these requirements can be applied to curved sheets, after agreement between manufacturer and purchaser.

Faserzement-Wellplatten und dazugehörige Formteile - Produktspezification und Prüfmethoden

Diese Norm legt die technischen Anforderungen an und die Verfahren zur Kontrolle und Prüfung sowie die Abnahmebedingungen für Faserzement-Wellplatten und dazugehörige Faserzement-Formteile für einen oder mehrere der folgenden Verwendungszwecke fest:
¾ Bedachungen;
¾ Innenwandbekleidungen;
¾ Außenwand- und Deckenbekleidungen.
Für die Anwendung dieser Norm werden Faserzement-Wellplatten nach ihrer Wellenhöhe und ihren mechanischen Eigenschaften klassifiziert.
Diese Norm erstreckt sich auf Faserzement-Wellplatten, die mit Fasern unterschiedlicher Art, wie in 5.1.1 festgelegt, bewehrt sind.
Diese Norm enthält keine Berechnungen zu Bauleistungen, Anforderungen an die Ausführung, Verlege-verfahren, Windsogsicherheit oder Regensicherheit der verlegten Platten.
ANMERKUNG   Einige dieser Anforderungen können nach Abstimmung zwischen Hersteller und Abnehmer auf gekrümmte Wellplatten angewendet werden.

Plaques profilées en fibres-ciment et accessoires - Spécifications du produit et méthodes d'essai

Le présent document spécifie les exigences techniques et établit les méthodes de contrôle et d�essai ainsi que les
conditions de réception des plaques profilées en fibres-ciment et de leurs accessoires en fibres-ciment utilisés pour
un ou plusieurs usages suivants :
- la toiture ;
- la finition des murs intérieurs,
- la finition des murs extérieurs et des plafonds.
Pour les besoins du présent document, les plaques profilées en fibres-ciment ont été classées en fonction de leur
hauteur d�onde et de leurs caractéristiques mécaniques.
Le présent document s�applique aux plaques profilées en fibres-ciment renforcées à l�aide de fibres de types
différents, telles que spécifiées en 5.1.1, avec ou sans revêtement appliqué en usine.
Le présent document n�inclut pas les calculs relatifs aux travaux, aux exigences de conception, aux techniques de
pose, aux soulèvements par le vent ou à l�étanchéité à la pluie des produits déjà posés.
NOTE Certaines de ces exigences peuvent être appliquées aux plaques cintrées, après accord entre le fabricant et
l�acheteur.

Vlaknato-cementne valovite strešne plošče in fazonski kosi - Specifikacija za izdelek in preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 30-Nov-2004
• Withdrawal Date: 20-Mar-2007
• ICS: 91.100.40 - Products in fibre-reinforced cement
• Technical Committee: CEN/TC 128 - Roof covering products for discontinuous laying and products for wall cladding
• Drafting Committee: CEN/TC 128/SC 4 - Fibre cement products for roofing
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 21-Mar-2007
• Completion Date: 21-Mar-2007
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
• Mandate: M/122 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on roof coverings, rooflights, roof windows and ancillary products
• Ref Project: SIST EN 494:2005 - Fibre-cement profiled sheets and fittings - Product specification and test methods

Relations

• Replaces: EN 494:1994/A1:1999 - Fibre-cement profiled sheets and fittings for roofing - Product specification and test methods
• Effective Date: 22-Dec-2008
• Replaces: EN 494:1994 - Fibre-cement profiled sheets and fittings for roofing - Product specification and test methods
• Effective Date: 22-Dec-2008
• Replaces: EN 494:1994/AC:1996 - Fibre-cement profiled sheets and fittings for roofing - Product specification and test methods
• Effective Date: 22-Dec-2008
• Replaces: EN 494:1994/AC:1995 - Fibre-cement profiled sheets and fittings for roofing - Product specification and test methods
• Effective Date: 22-Dec-2008
• Merged Into: EN 494:2004+A3:2007 - Fibre-cement profiled sheets and fittings - Product specification and test methods
• Effective Date: 22-Dec-2008
• Amended By: EN 494:2004/A2:2006 - Fibre cement profiled sheets and fittings - Product specification and test methods
• Effective Date: 22-Dec-2008
• Amended By: EN 494:2004/A1:2005 - Fibre-cement profiled sheets and fittings - Product specification and test methods
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 494:2005
01-marec-2005
1DGRPHãþD
SIST EN 494:1998
SIST EN 494:1998/A1:2000
SIST EN 494:1998/AC:2000
SIST EN 494:1998/AC1:1998
9ODNQDWRFHPHQWQHYDORYLWHVWUHãQHSORãþHLQID]RQVNLNRVL6SHFLILNDFLMD]D
L]GHOHNLQSUHVNXVQHPHWRGH
Fibre-cement profiled sheets and fittings - Product specification and test methods
Faserzement-Wellplatten und dazugehörige Formteile - Produktspezification und
Prüfmethoden
Plaques profilées en fibres-ciment et accessoires - Spécifications du produit et méthodes
d'essai
Ta slovenski standard je istoveten z: EN 494:2004
ICS:
91.060.20 Strehe Roofs
91.100.40 &HPHQWQLL]GHONLRMDþDQL] Products in fibre-reinforced
YODNQL cement
SIST EN 494:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 494:2005

---------------------- Page: 2 ----------------------

SIST EN 494:2005



EUROPEAN STANDARD EN 494

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2004
ICS 91.100.40 Supersedes EN 494:1994
English version
Fibre-cement profiled sheets and fittings - Product specification
and test methods
Plaques profilées en fibres-ciment et accessoires - Faserzement-Wellplatten und dazugehörige Formteile -
Spécifications du produit et méthodes d'essai Produktspezification und Prüfmethoden
This European Standard was approved by CEN on 3 March 2004.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.




EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 494:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 494:2005
EN 494:2004 (E)
Contents Page
Foreword.4
1 Scope .5
2 Normative references .5
3 Terms and definitions .5
4 Symbols and abbreviations .6
5 Product requirements .8
5.1 General.8
5.1.1 Composition.8
5.1.2 Appearance and finish .8
5.2 Dimensions and tolerance .9
5.2.1 General.9
5.2.2 Categorization by height of profile .9
5.2.3 Thickness .9
5.2.4 Tolerances on nominal dimensions.
...