EN 15057:2006
(Main)Fibre cement profiled sheets - Impact resistance test method
Fibre cement profiled sheets - Impact resistance test method
This European Standard specifies a soft body impact test method for fibre-cement profiled sheets for roofing.
This European Standard applies to fibre-cement profiled sheets conforming to EN 494 and of length greater than or equal to 1,04 m.
It applies only to products as delivered.
NOTE This European Standard can be applied, after agreement between manufacturer and purchaser, to curved sheets.
Faserzement-Wellplatten - Schlagfestigkeitsprüfung
Diese Europäische Norm legt ein Verfahren mit weichem Stoßkörper zur Prüfung von Faserzement-
Wellplatten für Dacheindeckungen fest.
Die Europäische Norm gilt für Faserzement-Wellplatten nach EN 494 und mit einer Länge von mindestens
1,04 m.
Die Norm gilt nur für Produkte im Auslieferungszustand.
ANMERKUNG Nach Vereinbarung zwischen Hersteller und Kunden kann diese Europäische Norm auch für gekrümmte
Platten gelten.
Plaques profilées en fibres ciment - Méthode d'essai de résistance au choc
La présente Norme européenne spécifie une méthode permettant de soumettre à l’essai de résistance au choc d’un corps mou les plaques profilées en fibres-ciment pour couverture de toiture.
Elle s’applique aux plaques profilées en fibres-ciment conformes à l’EN 494 et de longueur égale ou supérieure à 1,04 m.
Elle ne s’applique qu’au produit à l’état de livraison.
NOTE La présente Norme européenne peut s’appliquer aux plaques cintrées après accord entre le fabricant et le client.
Vlaknatocementne valovite strešne plošče - Odpornost proti udarcem - Preskusna metoda
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.PHWRGDFaserzement-Wellplatten - SchlagfestigkeitsprüfungPlaques profilées en fibres ciment - Méthode d'essai de résistance au chocFibre cement profiled sheets - Impact resistance test method91.100.40YODNQLProducts in fibre-reinforced cement91.060.20StreheRoofsICS:Ta slovenski standard je istoveten z:EN 15057:2006SIST EN 15057:2006en01-oktober-2006SIST EN 15057:2006SLOVENSKI
STANDARD
SIST EN 15057:2006
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15057June 2006ICS 91.100.40 English VersionFibre cement profiled sheets - Impact resistance test methodPlaques profilées en fibres ciment - Méthode d'essai derésistance au chocFaserzement-Wellplatten - SchlagfestigkeitsprüfungThis European Standard was approved by CEN on 24 May 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15057:2006: ESIST EN 15057:2006
EN 15057:2006 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Symbols and abbreviations.5 5 Product requirements.6 6 Sampling procedure.6 7 Test method for the determination of soft body impact resistance.7 8 Test report.17 Bibliography.18
SIST EN 15057:2006
EN 15057:2006 (E) 3 Foreword This document (EN 15057:2006) has been prepared by Technical Committee CEN/TC 128 “Roof covering products for discontinuous laying and products for wall cladding”, the secretariat of which is held by IBN/BIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2006, and conflicting national standards shall be withdrawn at the latest by December 2006. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 15057:2006
EN 15057:2006 (E) 4 Introduction Different fibre-cement profiled sheets on the market incorporate additional features to contribute to security during construction of the roof. Fibre-cement pr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.